Használati útmutató Roland SYS-500CS
Roland
Synthesizer
SYS-500CS
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Roland SYS-500CS (1 oldal) a Synthesizer kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/1
English
Owner’s Manual
Before using this unit, carefully read leaet “USING THE UNIT SAFELY.”
Copyright © 2015 ROLAND CORPORATION
Model SYS-512 SYS-521 SYS-530 SYS-540 SYS-572
Current Draw 70 mA (+12 V)
55 mA (-12 V)
40 mA (+12 V)
40 mA (-12 V)
50 mA (+12 V)
35 mA (-12 V)
85 mA (+12 V)
50 mA (-12 V)
110 mA (+12 V)
90 mA (-12 V)
Power Supply Eurorack power
Dimensions 80.8 (W) × 128.5 (D) × 57.2 (H) mm
3-3/16 (W) x 5-1/16 (D) x 2-1/4 (H) inches
Weight 212 g 203 g 194 g 202 g 213 g
8 oz 8 oz 7 oz 8 oz 8 oz
Accessories Owner’s Manual, Leaet “USING THE UNIT SAFELY,” Installation screws (4 pcs.), Eurorack power cable
In the interest of product improvement, the specications and/or appearance of this unit are subject to change without prior notice.
Main Specications Roland SYSTEM-500 (SYS-512, SYS-521, SYS-530, SYS-540, SYS-572) : Eurorack Modular
The documentation for this unit consists of the following materials.
5USING THE UNIT SAFELY (separate leaet)
Read this rst. It contains notes that you must observe in order to use the unit correctly.
5Owner’s Manual (this document)
This explains how to make connections, and describes the specications of the unit.
5Parameter Guide (English PDF)
This explains the various parts of the unit. Download it as described at right.
About the Manuals
CV stands for “Control Voltage,” an electrical signal (control voltage) that modies
the behavior of an analog synth or Eurorack module. GATE is a trigger signal that
controls the beginning and end of an envelope or other control voltage.
CV / GATE Input
Use the included screws (4 pcs.) to attach the unit to your Eurorack case at the
locations indicated.
CAUTION
7Keep small items out of the reach of
children
To prevent accidental ingestion
of the parts listed below, always
keep them out of the reach of small
children.
5Included Parts: Eurorack installation screws
Installing in a Eurorack Case
By using the included Eurorack power cable, you can operate this unit on the
Eurorack’s system power supply (+12 V).
1. Grasp the 16-pin connector of the Eurorack power cable, and insert it into
the Eurorack’s power connector so that the red wire is aligned with the -12
V pin.
2. Grasp the 10-pin connector of the Eurorack
power cable, and insert it into the unit’s
power connector so that the red wire is
aligned with the white line on the unit.
RED SIDE
RED SIDE
WHITE LINE
WARNING
7Electrocution hazard
* Always turn the Eurorack unit o and unplug the power cord
before plugging the Eurorack power cable.
* Do not touch the electrical terminals when attaching the Eurorack power
cable.
Using a Eurorack Power Cable
Obtaining the owner’s manual (PDF version)
1. Enter the following URL on your computer.
http://www.roland.com/manuals/
2. Select the name of your product.
* 5 1 0 0 0 4 7 2 8 8 - 0 1 *
Termékspecifikációk
| Márka: | Roland |
| Kategória: | Synthesizer |
| Modell: | SYS-500CS |
Szüksége van segítségre?
Ha segítségre van szüksége Roland SYS-500CS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Synthesizer Roland
12 Október 2024
23 Szeptember 2024
14 Szeptember 2024
5 Szeptember 2024
1 Szeptember 2024
1 Szeptember 2024
1 Szeptember 2024
25 Augusztus 2024
20 Augusztus 2024
19 Augusztus 2024
Útmutatók Synthesizer
- Synthesizer Yamaha
- Synthesizer Casio
- Synthesizer Suzuki
- Synthesizer Arturia
- Synthesizer Korg
- Synthesizer Behringer
- Synthesizer IK Multimedia
- Synthesizer Novation
- Synthesizer Elektron
- Synthesizer Flame
- Synthesizer Erica Synths
- Synthesizer AAS
- Synthesizer Moog
- Synthesizer Native
- Synthesizer Dreadbox
- Synthesizer Modal Electronics
- Synthesizer Jomox
- Synthesizer Waldorf
- Synthesizer (Recovery)
- Synthesizer Future Retro
- Synthesizer ELTA Music
- Synthesizer LennarDigital
Legújabb útmutatók Synthesizer
12 Október 2024
5 Október 2024
2 Október 2024
2 Október 2024
2 Október 2024
2 Október 2024
1 Október 2024
30 Szeptember 2024
30 Szeptember 2024
23 Szeptember 2024