Használati útmutató Rikon 50-120
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Rikon 50-120 (20 oldal) a Sander kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/20
6” X 48”Belt & 10”Disc Sander
www.rikontools.com
50-120M3
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167
4001824
50-120
IMPORTANT! Safety is the single most important consideration in the operation of this equipment.
The following instructions must be followed at all times.
There are certain applications for which this tool was designed. We strongly recommend that this tool
not be modied and/or used for any other application other than that for which it was designed. If you
have any questions about its application, do not use the tool until you have contacted us and we have
advised you.
General Safety Warnings
KNOW YOUR POWER TOOL. Read the owner’s manual carefully. Learn the tool’s
applications, work capabilities, and its specic potential hazards.
ALWAYS KEEP VISITORS AWAY FROM RUNNING MACHINES.
All visitors should be kept a safe distance from the work area.
ALWAYS MAKE THE WORKSHOP CHILDPROOF.
Childproof with padlocks, master switches, or by removing starter keys.
NEVER OPERATE A TOOL WHILE UNDER THE INFLUENCE OF DRUGS,
MEDICATION, OR ALCOHOL.
ALWAYS WEAR PROPER APPAREL.
Never wear loose clothing or jewelry that might get caught in moving parts. Rubber-soled footwear is
recommended for the best footing.
ALWAYS USE SAFETY GLASSES AND WEAR HEARING PROTECTION.
Also use a face or dust mask if the cutting operation is dusty.
NEVER OVERREACH.
Keep your proper footing and balance at all times.
ALWAYS GROUND ALL TOOLS.
If your tool is equipped with a three-pronged plug, you must plug it into a three-hole electric receptacle.
If you use an adapter to accommodate a two-pronged receptacle, you must attach the adapter plug to a
known ground. Never remove the third prong of the plug.
ALWAYS AVOID DANGEROUS ENVIRONMENTS.
Never use power tools in damp or wet locations. Keep your work area well lighted and clear of clutter.
ALWAYS REMOVE THE ADJUSTING KEYS AND WRENCHES FROM TOOLS AFTER USE.
Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before
turning it on.
ALWAYS KEEP YOUR WORK AREA CLEAN. Cluttered areas and benches invite accidents.
NEVER STAND ON TOOLS.
Serious injury could occur if the tool is tipped or if the cutting tool is accidentally
contacted.
2
Operator Safety: Required Reading
Special Safety Rules For Belt & Disc Sanders
SAVE THESE INSTRUCTIONS.
Refer to them often.
3
1. Do not operate this machine until you have read all of the following instructions.
2. Do not attempt to operate this machine until it is completely assembled.
3. Do not turn ON this machine if any pieces are missing.
4. If you are not familiar with the operation of the machine, obtain assistance from a qualied
person.
5. It is highly recommended that this machine be rmly mounted to a at and secure work surface
or stand.
6. Always wear protective eye wear prior to operating this machine.
7. Do not operate this machine if you are under the inuence of drugs and/or alcohol.
8. Remove all jewelry prior to operating this machine.
9. Do not wear any gloves while operating this machine.
10. Always make sure the power switch is in the OFF position prior to plugging in the machine.
11. Always make sure the power switch is in the OFF position when doing any assembly or setup
operation.
12. Always wear a dust mask and use adequate dust collection and proper ventilation. Use of
sanders can produce harmful particles while sanding certain types of woods.
13. The use of any accessories or attachments not recommended may cause injury to you and
damage your machine.
14. This machine must be properly grounded.
15. Abrasive discs and belts should be the recommended width and length of the manufacturer.
16. Always keep your face and hands clear of moving parts such as belts and pulleys.
17.Keep power supply cords free of moving parts of the sander. Damaged cords can result in
electric shock.
18. Maintain a 1/16” clearance between the sanding disc, sanding belt and tables.
19.Always support the workpiece with the table or backstop.
20. Remove material or debris from the work area. Keep work area neat and clean.
ALWAYS CHECK FOR DAMAGED PARTS.
Before initial or continual use of the tool, a guard or other part that is damaged should be checked to
assure that it will operate properly and perform its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its
operation. A guard or other damaged parts should immediately be properly repaired or replaced.
ALWAYS DISCONNECT TOOLS.
Disconnect tools before servicing and when changing accessories such as blades, bits, and cutters.
ALWAYS AVOID ACCIDENTAL STARTING.
Make sure switch is in “OFF” position before plugging in cord.
NEVER LEAVE TOOLS RUNNING UNATTENDED.
This owner’s manual is not a teaching aid. Use of this owner’s manual is intended to
show assembly, adjustments, and general use.
Termékspecifikációk
| Márka: | Rikon |
| Kategória: | Sander |
| Modell: | 50-120 |
Szüksége van segítségre?
Ha segítségre van szüksége Rikon 50-120, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Sander Rikon
28 December 2024
28 December 2024
28 December 2024
28 December 2024
28 December 2024
3 Szeptember 2024
29 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
19 Augusztus 2024
Útmutatók Sander
- Sander Milwaukee
- Sander Parkside
- Sander Bosch
- Sander AEG
- Sander Einhell
- Sander Ozito
- Sander Makita
- Sander Hyundai
- Sander Flex
- Sander Scheppach
- Sander Ergotools Pattfield
- Sander Mafell
- Sander Güde
- Sander Hitachi
- Sander Toolcraft
- Sander Proviel
- Sander Hilti
- Sander Black & Decker
- Sander Global
- Sander Fieldmann
- Sander PowerPlus
- Sander DEDRA
- Sander Metabo
- Sander Bavaria
- Sander RYOBI
- Sander Proxxon
- Sander HiKOKI
- Sander Festool
- Sander McKenzie
- Sander Trotec
- Sander Bavaria By Einhell
- Sander Herkules
- Sander Porter-Cable
- Sander DeWalt
- Sander Gastroback
- Sander Stanley
- Sander Silverline
- Sander Vonroc
- Sander Arendo
- Sander TAURUS Titanium
- Sander Alpha Tools
- Sander Holzmann
- Sander Fein
- Sander Cocraft
- Sander Craftsman
- Sander Maestro
- Sander Hazet
- Sander Ferm
- Sander Far Tools
- Sander Tryton
- Sander Skil
- Sander Meec Tools
- Sander Dremel
- Sander Tacklife
- Sander Maktec
- Sander Bort
- Sander Power Craft
- Sander Topcraft
- Sander Gamma
- Sander Matrix
- Sander Kress
- Sander Duro
- Sander Varo
- Sander Max
- Sander Truper
- Sander Kinzo
- Sander Bruder Mannesmann
- Sander Meister Craft
- Sander RIDGID
- Sander Probuilder
- Sander Rupes
- Sander Batavia
- Sander Protool
- Sander Westfalia
- Sander Black Decker
- Sander Stomer
- Sander Elu
- Sander King Craft
- Sander Powertec
- Sander Duro Pro
- Sander Toolson
- Sander Toledo
- Sander FIXIT
- Sander Einhell Bavaria
- Sander THUN
- Sander Prowork
- Sander Stalco
Legújabb útmutatók Sander
2 Január 2025
29 December 2024
29 December 2024
29 December 2024
27 December 2024
27 December 2024
27 December 2024
27 December 2024
27 December 2024
27 December 2024