Használati útmutató Ricatech RMC350

Ricatech lemezjátszó RMC350

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ricatech RMC350 (21 oldal) a lemezjátszó kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/21
USER MANUAL
GEBRUIKERSHANDLEIDING
MODE D'EMPLOI
BEDIENUNGSANLEITUNG
MANUALE D'USO
RMC350 5 in 1 MUSIC CENTER
910-111041-0030-100
IMPORTANT SAFEGUARDS FOR AUDIO PRODUCTS
PLEASE READ CAREFULLY THE FOLLOWING IMPORTANT SAFEGUARDS THAT
ARE APPLICABLE TO YOUR EQUIPMENT.
1. Read Instructions - All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future
reference.
3. Heed Warnings - All warnings on the appliance and in the operating instructions should
be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Water and Moisture - The appliance should not be used near water-for
example, near a bathtub,washbowl,kitchen sink,laundry tub, in a wet
basement, or near a swimming pooland the like.
6. Carts and Stands - The appliance should be used only with a cart
or stan that is recommendedby the manufacturer.
6A.An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the appliance and cart combination to overturn.
7. Wall or Ceiling Mounting - The appliance should be mounted to a
wall or ceiling only as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location or position does not interfere
with-its proper ventilation.For example, the appliance should not be situated on a bed, sofa,
rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation,
such as a bookcase or cabinet that may impede the flow of air through the ventilation
openings.
9. Heat - The appliance should be situated away from heat sources such as radiators,heat
registers, stoves,or other appliances (including amplifiers) that produce heat.
10. Power Sources - The appliance should be connected to a power supply only of the
type described in the operating instructions or as marked on the appliance.
11. Grounding or Polarization - Precautions should be taken so that the grounding or polarization
means of an appliance is not impeded.
12. Power - Cord Protection - Power-supply cords should be routed so that they are not likely
to be walked on or pinched by items placed upon or against them, paying particular attention
to cords at plugs, and the point where they exit from the appliance.
13. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.
14. This product is designed for use with the antenna attached and should not be connected
to any other external antennas.
15. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet
when left unused for a long period of time.
16. Object and Liquid Entry - Care should be taken so objects do not fall and liquids are not
spilled into the enclosure through openings
17. Damage Requiring Service - The appliance should be serviced by qualified service personnel
when:
A. The power-supply cord of the plug has been damaged;or
B. Objects have fallen, or liquid has been spilled into the appliance;or
C. The appliance has been exposed to rain;or
D. The appliance does not appear to operate normally or exhibits a marked change
inperformance;or
E. The appliance has been dropped, or the enclosure damaged.
18. Servicing - The user should not attempt to service the appliance beyond that described
in the operating instructions. All other servicing should be referred to qualified service
personnel.
1
40
POWER SOURCE
1 Untie the wire on the AC Adaptor
2 Plug the AC Adaptor into appropriate wall outlet.
3 Plug the small end of the adaptor into the ACADAPTOR JACK on the back of the unit.
UNPACKING THE TURNTABLE
1. Remove packing materials from unit.
Note: Save all packing materials.
2. Remove plastic bag covering radio.
3. Remove plastic safety cover from A/C plug.
4. Remove tie from A/C cord and untie antenna wire on back of radio
5. Open lid and remove styrofoam shipping material from turntable.
6. Remove black tie-wrap from under the tone arm.
7. Remove white protective needle cover by gently pulling towards the front of the unit.
8. Untie the FM antenna and allow it to hang down in a straight line for optimum FM reception. If you have
trouble tuning in an FM station, move the external FM antenna for best reception. Do no connect FM
antenna to outside antenna.
TURNTABLE OPERATION
Turn the unit on by rotating the ON/OFF-VOLUME ROTARY KNOB located on the front panel to the ON
position.
1. Rotate the FUNCTION SWITCH to select PHONO mode.
2. Set the SPEED CONTROL SWITCH to desire speed (33 1/3,45 or 78 rpm). Place the record on the
turntable.
3. Use the CUE LEVER to raise the tone arm off its rest. Pull the TONE ARM slightly to the right side until
hear the “click” sound to activate the turntable.
4. Move the TONE ARM by hand over the record and slowly lower it. Adjust the ON/OFF-VOLUME ROTARY
KNOB to the desired listening level.
5. At the end of the record, the TONE ARM will stop automatically. You must return to TONE ARM to arm
rest by hand.
Accessory: ADAPTER FOR 45 RPM
1 Place the 45 RPM adaptor over the spindle.
2 Gently place your 45 RPM record onto the turntable.
3 Follow the steps under turntable operation to play your record.
ANTENNA
For FM reception, the unit is provided with a FM WIRE ANTENNA , move the wire until the reception is
clear and with no interferences. For AM reception, the unit is provided with a directional build-in ferrite
antenna. Rotate the set to find the position in which the best reception is obtained. Do not connect the
EXTERNAL FM ANTENNA to any outside antenna.
RADIO OPERATION
1. Rotate the FUNCTION SWITCH to select RADIO mode.
2. Set the AM/FM BAND SWITCH to the desired radio band (AM or FM).
3. Select the desired radio station by rotating TURNING ROTARY KNOB.
4. Adjust the ON/OFF-VOLUME ROTARY KNOB to the desired sound level.
USB & SD-CARD OPERATION
SD-Card operation:
1. Insert SD-Card into the SD Card slot.
2. Switch on by turning the ON/OFF-VOLUME ROTARY KNOB from the Off position.
3. Adjust the ON/OFF-VOLUME ROTARY KNOB to the desired volume level.
4. Rotate the FUNCTION SWITCH to SD/USB Mode.
5. Press the PLAY/PAUSE BUTTON (USB/SD) to play the music tracks stored on the SD-card.
6. The green ACC LED will flash whilst the music is playing.
7. To pause the music, press the PLAY/PAUSE BUTTON (USB/SD) again.
8. Press the SKIP+ (USB/SD) / SKIP- (USB/SD) BUTTON to go to the next file during Play Mode.
9. To stop playing the music files stored on the SD-Card , press the PLAY/PAUSE BUTTON (USB/SD).
Note: Power the unit off first before disconnecting the SD-Card. Turning the VOLUME CONTROL to
Off position.
GUÍA DE SOLUCIÓN DE PROBLEMAS
PLATO
No hay alimentación
1. El adaptador de CA no está bien conectado.
2. Compruebe que el botón de volumen ENCENDIDO/APAGADO está en la posición ENCENDIDO.
No hay sonido
1. Compruebe el nivel de volumen girando el botón de volumen.
El plato no funciona
1. Asegúrese de que el selector de función está ajustado a “phono”.
2. Pruebe a mover el brazo del tocadiscos hacia la derecha hasta que suene un clic.
3. Asegúrese de haber retirado la cubierta protectora de la aguja.
No se reproduce el CD
1. Asegúrese de haber introducido el CD correctamente (el lado del a etiqueta hacia arriba).
2. Compruebe que la superficie del CD está limpia
3. Asegúrese de que el selector de función está ajustado a CD.
USB - No se reproduce música si se pulsa REPRODUCCIÓN/PAUSA (USB).
1. Asegúrese de que la unidad Flash/dispositivo MP3 ha almacenado archivos de música.
2. La unidad solo reproducirá dispositivos Flash de hasta 4 GB.
3. Reinicie el USB/SD apagando o rotando el SELECTOR DE FUNCIÓN (2) para seleccionar otro modo.
Luego seleccione el modo SD/USB otra vez.
4. Compruebe si el/los archivo/s es/son archivo/s WMA. La unidad no reproduce el formato WMA, sólo
formato MP3.
Especificaciones USB
Interfaz
* USB2.0 Full Speed, host (no compatible con USB HUB)
Memoria Flash correspondiente
* Memoria Flash USB1.1
* Memoria Flash USB2.0 High speed
* Tamaño máximo de la memoria : 4 GByte
* Tamaño mínimo de la memoria : 512MByte (Solo FAT16).
Decodificador MP3
* Compatible con Audio MPEG 1, 2, 2.5
* Compatible con Layer 1, 2, 3
* Compatible con tasa de transferencia de Bit: 8 k ~ 320 kbps
* Subcarpetas anidadas: 8
* Compatible con tasa de muestreo: 8 k, 16 k, 32 k, 11,025 k, 22,05 k, 44,1 k, 12 k, 24 k, 48 kHz
* Número máximo de archivos para la reproducción: 999
* Formato de archivo para la reproducción: *.mp3. *.mp2, *.mp1; no es posible seleccionar el formato
38
3

Termékspecifikációk

Márka: Ricatech
Kategória: lemezjátszó
Modell: RMC350

Szüksége van segítségre?

Ha segítségre van szüksége Ricatech RMC350, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók lemezjátszó Ricatech

Ricatech

Ricatech RTT95 Útmutató

4 Október 2024
Ricatech

Ricatech RTT25 Útmutató

21 Augusztus 2024
Ricatech

Ricatech RMC250 De Luxe - 6 in 1 turntable Útmutató

29 Július 2024
Ricatech

Ricatech RMC350 Útmutató

19 Július 2024
Ricatech

Ricatech RTT33 Útmutató

11 Július 2024
Ricatech

Ricatech RMC100 Útmutató

6 Július 2024

Útmutatók lemezjátszó

Legújabb útmutatók lemezjátszó

Pro-Ject

Pro-Ject X8 B Útmutató

29 Március 2025
Rega

Rega RP40 Anniversary Edition Útmutató

14 Január 2025
Create

Create Record Player Retro Útmutató

14 Január 2025
Lenco

Lenco Classic Phono TT-34 Útmutató

12 Január 2025
Sunstech

Sunstech PXRC52CD Útmutató

11 Január 2025
Classic Phono

Classic Phono TCD-2551 Útmutató

11 Január 2025
Audio-Technica

Audio-Technica AT-LP70XBT Útmutató

11 Január 2025
Audio-Technica

Audio-Technica AT-LP70X Útmutató

11 Január 2025
Audio-Technica

Audio-Technica AT-LP8X Útmutató

6 Január 2025
Pro-Ject

Pro-Ject Signature 12.2 Útmutató

6 Január 2025