Használati útmutató Renusol ConSole

Renusol Különféle klímaberendezés ConSole

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Renusol ConSole (8 oldal) a Különféle klímaberendezés kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
ConSole Installation instructions
2 — Renusol ConSole · EN · 04/2011
INSERTION
Product Information
The ConSole assembly system is the ideal solution for installing PV modules
on flat roofs with pitch of up to 5° without roof penetration. Most commercially
available framed standard PV modules fit on the ConSole.
The ConSole is weighed down with ballast (gravel, paving slabs, etc.) in order to
resist the wind loads. The necessary weight of the ballast depends on the height
of the building, its location and condition of the ground and the wind and snow
loads. Reference values for the necessary ballast are contained in "Preparing the
assembly – point 2." in the table on page 5 above.
The ConSole is made from 100% recycled chlorine-free polyethylene (HDPE).
The material of the ConSole satisfies the fire prevention measures of DIN 4102
class B2. The energy amortization time of the ConSole is shorter than one year.
A ConSole weighs 5 −7.2 kg depending on the type and can be stacked with up
to 40 ConSoles per pallet. The circular assembly edge will facilitate a fast
installation. Generously sized ventilation channels ensure efficient air circulation.
The boreholes on the ground of the ConSole are conducive for drainage.
We wish to point out that work must be carried out according to current safety
regulations (e.g., VBG37) in order to prevent accidents. Please carry out the
respective safety measures.
Warranty
Our warranty only applies if an original ConSole complete system is used.
In order to adjust the system optimally for the local conditions and to fulfil all
applicable regulations, we recommend an expert report be prepared if in any
doubt. The installation should be carried out by skilled and trained personnel.
If you have questions concerning training, please contact Renusol.
Installation instruction
Please read these installation instructions carefully before starting installation.
First, familiarize yourself with the system components. The ConSole can be
stored and used at temperatures of between -30° C and +50° C. We recommend
the ConSoles be assembled at plus temperatures. The roof area must in any case
be free of snow and ice.
During the installation and, in particular, while working on the roof, be sure to
observe the relevant health and safety provisions and please follow the current
rules and regulations.
Please also check the current version of our installation instructions on our
website at www.renusol.com. Here, you can also find instructions in other
languages, if required. The figures and texts in the installation instructions
correspond to current technology at the time of printing. We reserve the right
to make changes.
The installation instructions merely contain recommendations in accordance
with current technology and are based on the experience of how systems made
by Renusol can be installed. If any roof or object-specific characteristics are to be
considered, please, if necessary, involve specialists such as roofers or structural
engineers for the purposes of explanation.
The Renusol team wishes you a successful installation.
Renusol ConSole · EN · 04/2011 — 3
A ConSole
B U profiles of aluminium
C PV module
D Generously sized
Ventilation channels
E Boreholes for draining
the ConSole
F Circular assembly edge
B
B
C
D
D
D
D
E
E
F
F
A
SYSTEM OVERVIEW
SYSTEM OVERVIEW OF COMPONENTS
TOOLS REQUIRED (not included in delivery)
8 hexagonal
screws
M6 x 20 mm,
stainless steel
OPTIONAL EXTENSION RAILS
ConSole set of extension rails
consisting of:
– 2 ConSole extension rails, aluminium
– 4 hexagonal screws M6 x 20 mm, stainless steel
– 4 washers, stainless steel
– 4 self-locking hexagon nuts M6,
stainless steel
8 Self-locking
hexagon nuts M6,
stainless steel
8 washers,
stainless steel
– Cordless screwdriver with hexagonal insert
for 10-mm screw
– 7-mm drill
– 10-mm open end or ring spanner
55
150
A ConSole B 2 U profiles,
aluminium

Termékspecifikációk

Márka: Renusol
Kategória: Különféle klímaberendezés
Modell: ConSole

Szüksége van segítségre?

Ha segítségre van szüksége Renusol ConSole, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Különféle klímaberendezés Renusol

Renusol

Renusol ConSole Útmutató

13 Augusztus 2024

Útmutatók Különféle klímaberendezés

Legújabb útmutatók Különféle klímaberendezés

Elco

Elco LOGON B SOL Zonneregelaar Útmutató

5 Október 2024
Junkers

Junkers Storacell PF 1000 solar Útmutató

20 Szeptember 2024
Junkers

Junkers Storacell SK 160 Útmutató

19 Szeptember 2024
Elco

Elco LOGON SOL plus Zonneregelaar Útmutató

17 Szeptember 2024
Ygnis

Ygnis TOTALECO TURBO Diversen klimaatbeheersing Útmutató

14 Szeptember 2024
Oregon Scientific

Oregon Scientific BA169 weer hub Útmutató

24 Augusztus 2024
Riello

Riello BGK0.1 Útmutató

24 Augusztus 2024
Premix

Premix XR-Serie Útmutató

24 Augusztus 2024
Elektrobock

Elektrobock RJ 402 Útmutató

24 Augusztus 2024
Elektrobock

Elektrobock RJ 401 Útmutató

24 Augusztus 2024