Használati útmutató (Recovery) The Mystic

Olvassa el alább 📖 a magyar nyelvű használati útmutatót (Recovery) The Mystic (4 oldal) a szintetizátor kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
THE MYSTIC (SEMI-MODULAR DESKTOP SYNTH
THE MYSTIC IS AN EXPERIMENTAL FM SYNTH WITH 2 CARRIER FREQUENCIES, 2
MODULATORS, AND AN ANALOG STYLE DELAY. ALL OF THE SYNTH PARAMETERS ARE
CONTROLLABLE VIA CV AS WELL AS TIME CONTROL IN THE DELAY SECTION.
THE MYSTIC GENERATES COLOSSAL WAVES THAT SWIRL, ECHO, ASCEND, AND
PLUNGE INTO AN EVER-CHANGING, SONIC PLAYGROUND. TRANSCEND REALITY
AND LET THE MYSTIC GUIDE THE WAY!
OVERVIEW
POWERING UP
The Mystic uses a 9VDC, negative-tip, 200ma power supply. It is a standard Boss-style
power supply used for most effects pedals.. Power supply sold separately.
Once plugged in, the Mystic is powered up and ready to go. Simply unplug it from the wall
when not in use.
OUTPUT
line level
A NOTE ABOUT THE OUTPUT LEVEL
The Mystic runs at line level, to be used with pedals and other devices that also run at line
level. If using with Eurorack, the output level needs to be converted, just as you would with
any guitar pedal. There are several Eurorack modules that do this, but the one we use and
recommend is the Strymon AA.1.
OUTPUT JACK
The Mystic requires a 3.5mm cable to connect the audio output to other devices.
MOMENTARY BUTTON
Use this to momentarily turn sound on and
off. The momentary Button only functions
when the Latching Switch is in the off
(down) position.
LATCHING SWITCH
Use this to latch the sound on and off. Up
is on, and down is off.
CONTROLS
CARRIER FREQUENCY CONTROLS
Each carrier works together to build a
waveform. Usually it’s CF2 that responds
to pitch tracking, but that can vary
depending on the setting. Think of CF1
and CF2 as 2 sign waves being folded in
various ways. Sending independent CV
into each one will not get traditional 1
v/oct pitch results, but a combination of
pitch, texture and tone.
MODULATOR CONTROLS
These are used to shape the tone and
texture of the folded waveform you’ve
created with CF1 and CF2. Modulation
rate will control the speed of the
modulation texture.
DELAY TIME CONTROLS
Controls the delay / echo time.
DELAY FEEDBACK
Controls the number of delay / echo
repeats.
DELAY MIX
Controls the volume of the delay / echo
signal.
VOLUME
Controls the overall output volume of the
Mystic.
CV CONTROLS
These will accept CV voltage of up to +5
volts. The parameter you are controlling
should be at 12 0’clock to get the most
effect from the voltage input.

Termékspecifikációk

Márka: (Recovery)
Kategória: szintetizátor
Modell: The Mystic

Szüksége van segítségre?

Ha segítségre van szüksége (Recovery) The Mystic, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek