Használati útmutató Really Right Stuff BH-25

Really Right Stuff Háromlábú BH-25

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Really Right Stuff BH-25 (3 oldal) a Háromlábú kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/3
KEY FEATURES
360° Panning Base
25mm Ball
is hollow
for reduced
weight.
CNC machined
body is robust
and sealed to
prevent dust
contamination.
Quick-Release clamps are offered in screw-
knob or lever-release styles (platform also
available). Both clamp styles have laser-
engraved scales in 1mm increments.
Use Drop Notch
to position your
camera at 90° from
top dead center
(portrait mode).
Main lock T-Lever
to easily lock
ballhead; T-Lever
simultaneously
locks both ball
articulation and
panning.
Load Capacity....................................................8.8 pounds (4kg)
Ball Articulation.....................................................±45º, 90º notch
Tension Adjustment......................................via Main Lock T-lever
Height of BH-25 Pro...........................................2.6” (66mm)
Tripod Mount.............................................Stainless Steel 3/8”-16
Base Diameter...........................................................1.3” (33mm)
Ball Diameter.............................................................1.0” (25mm)
Weight of BH-25 Pro..............................6.5 ounces (185g)
Main Lock T-Lever..........................Spring loaded & repositionable
SPECIFICATIONS:
BH-25 Pro Shown Below
BALLHEAD ID: _____________________________
BH-25 BALLHEAD
1146 Farmhouse Lane, San Luis Obispo, CA 93401 USA
1-805-528-6321 | 1-888-777-5557
www.ReallyRightStu.com
MODELS
The BH-25 ballhead is available with a Really Right Stuff quick-release
clamp or a flat platform; also available without clamp or platform.
BH-25 PF
Head comes with flat platform with ¼”-20
threaded stud for direct mounting of camera.
Platform diameter = 1½ inches (38mm); fitted
with cork bed to provide snug fit of camera.
BH-25 Pro
Head comes with B2-mAS quick-release clamp
secured with ¼”-20 flat head screw. Clamp
accepts most Arca-Swiss compatible plates (not
Novoflex). Purchase plates separately.
BH-25 LR
Head comes with B2-40 LR quick-release clamp
secured with ¼”-20 flat head screw. Clamp
accepts all Really Right Stuff quick-release plates.
Purchase plates separately.
GUARANTEE
ALL REALLY RIGHT STUFF BRAND PRODUCTS ARE
GUARANTEED TO THE ORIGINAL PURCHASER TO BE FREE
OF DEFECTS IN MATERIALS OR WORKMANSHIP FOR FIVE
(5) YEARS FROM THE DATE OF PURCHASE. PRODUCTS
WILL BE REPAIRED OR REPLACED AT OUR OPTION.
® , ™, © 1990-2017 Really Right Stuff, LLC. All rights reserved.
MAINTENANCE
General Care
The BH-25 is finished with a protective anodize plating that protects
the aluminum from corrosion and mild abrasion. It will not protect it
from scraping against or dropping on rocks/concrete/etc.
Cleaning
Take precautions to prevent your BH-25 from getting fouled in mud, dirt,
or sand. If the BH-25 is fouled, dry dust and dirt can be blown off and/
or wiped off with a soft cloth. Mud or salt water should be lightly rinsed
off with fresh water and then thoroughly dried. If fine sand/grit fouls
the knob, simply run a gentle stream of water around the knob while
rotating it one-half turn back and forth. Do NOT submerge the ballhead
and do not direct a high-pressure stream of water at it.
INSTALL TO TRIPOD
1. Tighten the Main Lock T-Lever to lock the Panning Base.
2. Screw the ballhead onto the 3/8”-16 threaded stud on
the top of the tripod (stud should not protrude more than
3/8” above platform or 5-6 threads). Tighten the ballhead
onto the tripod snugly, but do not over-torque or it will be
difficult to remove.
USING THE MAIN LOCK T-LEVER
The Main Lock T-Lever is longer on
one end. This design makes it easy
to turn the lever and apply enough
pressure to solidly lock the head. In
some instances, though, the long
end of the lever may hit the tripod
platform or even the clamp. That’s
why we made the main lock T-Lever
spring loaded and re-positionable:
1. Pull the T-Lever out.
2. Rotate T-Lever to a new
position. The T-Lever actually
drives an internal six-sided
he x nut, so there are 6
possible positions for the
T-Lever.
3. Allow T-Lever to snap into
place.

Termékspecifikációk

Márka: Really Right Stuff
Kategória: Háromlábú
Modell: BH-25

Szüksége van segítségre?

Ha segítségre van szüksége Really Right Stuff BH-25, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Háromlábú Really Right Stuff

Really Right Stuff

Really Right Stuff BH-40 Útmutató

11 December 2024
Really Right Stuff

Really Right Stuff BH-55 Útmutató

11 December 2024
Really Right Stuff

Really Right Stuff BH-25 Útmutató

11 December 2024
Really Right Stuff

Really Right Stuff BH-30 Útmutató

11 December 2024
Really Right Stuff

Really Right Stuff BPC-16 Útmutató

11 December 2024
Really Right Stuff

Really Right Stuff B2-40-LR Útmutató

11 December 2024
Really Right Stuff

Really Right Stuff B2-LR II Útmutató

11 December 2024
Really Right Stuff

Really Right Stuff TVC-34 Útmutató

11 December 2024
Really Right Stuff

Really Right Stuff PC-LR Útmutató

11 December 2024
Really Right Stuff

Really Right Stuff TVC-24 Útmutató

11 December 2024

Útmutatók Háromlábú

Legújabb útmutatók Háromlábú

Cartoni

Cartoni Master M111 Útmutató

11 December 2024
Cartoni

Cartoni Maxima Útmutató

11 December 2024
Cartoni

Cartoni Focus 12 Útmutató

11 December 2024
Cartoni

Cartoni Focus 8 Útmutató

11 December 2024
Cartoni

Cartoni Focus 18 Útmutató

11 December 2024
HPRC

HPRC 2700W-01 Útmutató

11 December 2024
Magnus

Magnus VPH-10P Útmutató

11 December 2024
Magnus

Magnus REX DSF-132 Útmutató

11 December 2024
REVO

REVO AC-GRB Útmutató

11 December 2024
REVO

REVO AC-MUSIC Útmutató

11 December 2024