Használati útmutató Rane SM226S
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Rane SM226S (6 oldal) a Splitter kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/6
SM26S
SPLITTER / MIXER
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
10
6
2
6
2
10
10
6
2
6
2
10
10
6
2
6
2
10
10
6
2
6
2
10
10
6
2
6
2
10
10
6
2
6
2
MASTER
INPUT
2
3
4
5
6
1
POWER
MASTER
OUTPUT
SM26S
SPLITTER
MIXER
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
MIX / PAN
MIX / PAN
MIX / PAN
MIX / PAN
LEVEL
MIX / PAN
LEVEL
MIX / PAN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
To reduce the risk of electrical shock, do not open the unit. No user
serviceable parts inside. Refer servicing to qualied service personnel.
e symbols shown below are internationally accepted symbols
that warn of potential hazards with electrical products.
is symbol indicates that a dangerous voltage
constituting a risk of electric shock is present
within this unit.
is symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
WARNING
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, registers, stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. e wide blade or third prong is provided for your safety. If the provided plug
does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord and plug from being walked on or pinched particularly at plugs, convenience receptacles, and the point where it exits from
the apparatus.
11. Only use attachments and accessories specied by Rane.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15. e plug on the power cord is the AC mains disconnect device and must remain readily operable. To completely disconnect this apparatus from
the AC mains, disconnect the power supply cord plug from the AC receptacle.
16. is apparatus shall be connected to a mains socket outlet with a protective earthing connection.
17. When permanently connected, an all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in the
electrical installation of the building.
18. If rackmounting, provide adequate ventilation. Equipment may be located above or below this apparatus, but some equipment (like large power
ampliers) may cause an unacceptable amount of hum or may generate too much heat and degrade the performance of this apparatus.
19. is apparatus may be installed in an industry standard equipment rack. Use screws through all mounting holes to provide the best support.
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping
or splashing and no objects lled with liquids, such as vases, shall be placed on the apparatus.
NOTE: is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
ese limits are designed to provide reasonable protection against harmful interference in a residential installation. is equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modications not expressly approved by Rane Corporation could void the user's authority to operate the equipment.
is Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
WARNING: is product may contain chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm.
Manual-1
OPERATORS MANUAL SM26S
SPLITTER MIXER
Quick Start
Realizing that in most areas there are laws against reading own-
ers manuals, and that reading them under the blankets at night
with a ashlight makes you feel stupid, p3-we therefore provide this
brief, yet legal description of how to use the SM26S just in case
your batteries are low and your mother is about to come in the
room.
To achieve a quick understanding of the SM26S, think of
it as a six channel mixer with faders and pans only. Or think of
it as a 2-to-6 channel splitter with output level controls and a
mix knob (to control how much of which input goes to which
output). If you get that, you may stop here as long as you know
what a TRS plug is.
As a six channel mixer, MONO INPUT 1 through 6 may
be placed on the Right or Left bus or both, in any amount. e
respective LEVEL controls on the front serve as the mixer’s fad-
ers, the adjacent controls place the channel’s signal into the PAN
stereo eld. As an eects mixer or line level expander for a larger
mixer, set up the then adjust the . e LEVELS PANS MAS-
TER OUTPUT LEVEL adjusts the overall level of the mix at
the Master Outputs.
As a splitter, place one or both input signals into the LEFT
and/or RIGHT MASTER INs. Select the Input(s) to be placed
at each of the six MONO OUTPUTS by rotating the MIX /
PAN control to the proper position. Set the individual channel
LEVEL controls for proper output level. e MASTER INPUT
LEVEL control adjusts both Right and Left Input signal levels
together.
WEAR PARTS: is product contains no wear parts.
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
10
6
2
6
2
10
10
6
2
6
2
10
10
6
2
6
2
10
10
6
2
6
2
10
10
6
2
6
2
10
10
6
2
6
2
MASTER
INPUT
2
3
4
5
6
1
POWER
MASTER
OUTPUT
SM26S
SPLITTER
MIXER
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
MIX / PAN
MIX / PAN
MIX / PAN
MIX / PAN
LEVEL
MIX / PAN
LEVEL
MIX / PAN
SM26S Connection
When connecting the SM26S to other components in your sys-
tem for the rst time, . is gives leave the power cord for last
you a chance to make mistakes and correct them before damage
is done to anything fragile.
As you have no doubt noticed, all Inputs and Outputs on the
SM26S’s rear panel are ¼" connectors. e Inputs and Outputs
are active balanced on Tip-Ring-Sleeve (TRS) jacks which allow
the exibility of connecting in either a balanced or unbalanced
fashion. If unbalanced operation is your preference, the simplest
way to accomplish this is through the use of tip-sleeve ¼" con-
nectors. e ring is not essential unless balanced operation is
required. Be aware that if you are running unbalanced and using
TRS connectors with both tip and ring, the ring and sleeve must
be shorted together. Failure to do so on the inputs results in a
gain loss of 6 dB.
Balanced operation requires that TRS plugs be used. e tip
is hot (+), the ring is return (–) and the sleeve is ground. Rane-
Note, “Sound System Interconnection” (included here) contains
some great pictures to aid your interconnect ventures.
Termékspecifikációk
| Márka: | Rane |
| Kategória: | Splitter |
| Modell: | SM226S |
Szüksége van segítségre?
Ha segítségre van szüksége Rane SM226S, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Splitter Rane
18 Augusztus 2024
16 Augusztus 2024
Útmutatók Splitter
- Splitter Samsung
- Splitter Fujitsu
- Splitter Nedis
- Splitter StarTech.com
- Splitter Crestron
- Splitter Scheppach
- Splitter Tripp Lite
- Splitter Smart-AVI
- Splitter Black Box
- Splitter Aluratek
- Splitter Audio-Technica
- Splitter ATen
- Splitter Akasa
- Splitter APC
- Splitter Manhattan
- Splitter D-Link
- Splitter Monacor
- Splitter Zipper
- Splitter Konig
- Splitter Marmitek
- Splitter MuxLab
- Splitter Rolls
- Splitter IFM
- Splitter Atlona
- Splitter Lindy
- Splitter Siig
- Splitter Gefen
- Splitter Comprehensive
- Splitter Newstar
- Splitter KanexPro
- Splitter Kramer
- Splitter Icy Box
- Splitter ACG
- Splitter Sun Joe
- Splitter Audiovox
- Splitter Xantech
- Splitter Televés
- Splitter Botex
- Splitter Rose Electronics
- Splitter SmartAVI
- Splitter Klover
- Splitter Omnitron Systems
- Splitter WyreStorm
- Splitter C2G
- Splitter Club 3D
- Splitter CLUB3D
Legújabb útmutatók Splitter
10 December 2024
10 December 2024
10 December 2024
7 December 2024
7 December 2024
7 Október 2024
5 Október 2024
4 Október 2024
3 Október 2024
2 Október 2024