Használati útmutató Rain Bird 32SA

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Rain Bird 32SA (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
Simple to use:
Find your fixed LEFT edge.
Using the palm of your hand, turn
the center cap to the right until it
stops. Then turn it to the left until it
stops. This is your fixed left edge.
Arc is preset to rotate 180º.
Adjusting the Pattern.
Using a screwdriver, adjust the
arc dial clockwise (+) to increase
the arc or counterclockwise (-)
to decrease the arc. Pattern is
adjustable from 4 to 360º.
Do not turn past right or left
stop. Adjust wet or dry.
Adjusting the Radius.
Using a screwdriver, turn radius-
reduction screw to reduce radius
up to 35%. Adjust wet or dry.
Questions? Please call 1-800-Rain Bird
or visit us at www.rainbird.com
© 2002 Rain Bird Corporation
32SA POP-UP
GEAR DRIVEN ROTOR
SA for Simple Adjust
SA for Simple Adjust
Replaces
competive
product such as
Orbit©Saturn III
Pressure PSI 25 35 45 55
Radius ft. 29 31 31 32
Flow GPM 2.17 2.60 3.00 3.25
3.0 Pre-Installed Nozzle* Performance Chart
SPRAYS 19 TO 32 FEET
ADJUST FROM 40-360º
READY FOR INSTALLATION
SPRAYS 19 TO 32 FEET
ADJUST FROM 40-360º
READY FOR INSTALLATION
1/2 INLET1/2 INLET
*Rain Curtain
Nozzle Technology
for even water distribution

Termékspecifikációk

Márka: Rain Bird
Kategória: nincs kategorizálva
Modell: 32SA

Szüksége van segítségre?

Ha segítségre van szüksége Rain Bird 32SA, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Rain Bird

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva