Használati útmutató Pyle PVTTBT8

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pyle PVTTBT8 (8 oldal) a lemezjátszó kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
PVTTBT8
Retro Belt Drive Bluetooth Turntable with -
USB- -to PC Connection
TURNTABLE PARTS
1. Tone Arm
2. Speakers
3. Tone Arm Rest
4. Function Selection Knob
5. Power/Volume Control Switch
6. Power Led Light Indicator
7. BT Led light indicator
8. Internal Battery Charging Led light Indicator
9. Speaker Buckles
10. Turntable Player Lock
11. Handle
12. Stylus/cartridge
13. Turntable platter
14. Speaker Cable
15. 3.5mm line in Jack-
16. RCA output Jack
17. USB Jack to PC for recording
18. Speed Selection Switch
19. Power Adaptor Jack
POWER ON THE UNIT
Connect the power adaptor to an electrical outlet (120V-60Hz); Or make sure that the
rechargeable battery has been fully charged. Then, turn the Power/Volume Control knob
clockwise to switch on the unit. The Power led light indicator will light up(6).
CHARGING INTERNAL BATTERY
Once connected to the power adaptor, the internal battery is atomatically charging, the red led
light indicator(8) will light red. Once fully charged, the charging led light indicator(8) will turn off.
PLAY A RECORD
1. Open the suitcase by unlock the 3 buckles(9, 10)
2. Turn the function selection knob (4) to Phono mode
3. Place a record on the turntable (1 ) 3 and set the player speed to match the record speed ( ) 18
(33/45). NOTE: when playing a single (a 45 rpm record) and/or records with large centre
holes, use the 45 rpm adaptor (packed together ). with the instruction manual
4. Remove the tone arm from the rest (1) (3), push lift lever backward to raise the tone arm and
gently move the tone arm to the desired position over the record. The turntable will begin to
spin when the tone arm is above record. S onto the desired position on the lowly lower
record to begin playing the record.
5. Turn the volume control(5) to adjust the volume level.
6. For best performance and product maintenance, unplug the turntable when not in use.
PLAY BLUETOOTH
7. Turn the function selection knob (4) to BT m The BT light indicatorode. (7) will flash with Blue
led light.
8. Open the BT audio source and connect with “Speaker. Once connected, the BT light
indicator will flash only in blue color.
9. Control the BT audio source to select songs and volume for playback.
LINE IN
10. Turn the function selection knob (4) to LINE IN mode. Connect the 3.5mm line- 5in jack (1 )
which is located at the rear of the unit. Connect the other end of the aux cable (not included)
to your aux source.
11. Control the Line in audio source to select songs and volume for playback.-

Termékspecifikációk

Márka: Pyle
Kategória: lemezjátszó
Modell: PVTTBT8

Szüksége van segítségre?

Ha segítségre van szüksége Pyle PVTTBT8, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók lemezjátszó Pyle

Pyle

Pyle PMXU63BT Útmutató

9 Október 2024
Pyle

Pyle PAD33MXUBT Útmutató

30 Szeptember 2024
Pyle

Pyle PVTTBT9BR Útmutató

28 Augusztus 2024
Pyle

Pyle PVTT2UOR Útmutató

28 Augusztus 2024
Pyle

Pyle PMXU48BT Útmutató

7 Augusztus 2024
Pyle

Pyle PAD43MXUBT Útmutató

4 Augusztus 2024
Pyle

Pyle PVNTLCL41BT Útmutató

3 Augusztus 2024
Pyle

Pyle PMXU128BT Útmutató

31 Július 2024
Pyle

Pyle PAD12MXUBT Útmutató

29 Július 2024

Útmutatók lemezjátszó

Legújabb útmutatók lemezjátszó