Használati útmutató Pure Acoustics BQ 260

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pure Acoustics BQ 260 (1 oldal) a hangszóró kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
Take the cardboard template that comes with the speakers and
place it where you want the speaker to be mounted.
Draw around the template and cutout the speaker mounting hole.
Run quality speaker wire (12-16 gauge ) to that location.
Carefully pry off the grill from the speaker either using a small
screwdriver at the edge of the grill or with a small awl catching the
grill by one of its holes.
Connect the speaker wire to the speaker terminals and insert the
speaker into the hole.
There are screws around the perimeter of the face of the speaker
(6 on the inwalls). These screws connect to ‘wings’ in the rear of the
speaker which will swing out and clamp the speaker to the wall as they
are tightened.Secure the speaker to the wall by tightening these screws
until the speaker is securely mounted.
Reattach grill.
That s It ! Enjoy !
In-wall Speakers
Cutout Dimensions
BQ 260: 183 x 183mm
BQ 108: 247 x 247mm
BQ 360: 183 x 119mm
BQ 450: 356 x 148mm
BQ Series

Termékspecifikációk

Márka: Pure Acoustics
Kategória: hangszóró
Modell: BQ 260

Szüksége van segítségre?

Ha segítségre van szüksége Pure Acoustics BQ 260, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hangszóró Pure Acoustics

Útmutatók hangszóró

Legújabb útmutatók hangszóró