Használati útmutató Proline MC 16

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Proline MC 16 (29 oldal) a Konyhai robotgép kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/29
Downloaded from www.vandenborre.be
MC16
Minipicadora
Mini Hachoir
Mini-Hakker
Mini Sekacek na potraviny
Minimixer
Mini Tritatutto
Mini Chopper
Downloaded from www.vandenborre.be
EN
IMPORTANT SAFETY INSTRUCTIONS
Do not unplug from the mains by pulling on the mains lead, grasp the plug to remove it.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Always disconnect the appliance from the power supply if it is left unattended and before assembling,
disassembling or cleaning.
Make sure the rotating blade stops completely before disassembling.
Do not use the appliance if the rotating blade is damaged.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons to avoid a hazard.
Keep appliance and the power cable away from direct radiant heat from the sun, from damp, from sharp edges
and other dangers.
Only use original accessories recommended by the manufacturer.
Do not use outdoors or expose to rain.
Do not use the product with wet hands or bare feet.
If the appliance is dropped in water do not reach for it, switch off and disconnect at the mains and drain the water
before retrieving the appliance, do not use the appliance again until it has been checked by a qualified service
agent.
Never touch the rotating blades while still in motion; always wait for them to stop.
Never use this appliance to mix or stir anything other than foods.
Avoid contacting moving parts.
Do not blend or chop food that is cooking or use with boiling liquids. Danger of scalding.
CAUTION:
The cutting blades are sharp, handle with care.
Do not attempt to remove or replace any attachment when the appliance is in operation.
WARNING:
Care shall be taken when handling the sharp cutting blades, emptying the bowl and when cleaning.
Switch off the appliance and disconnect from the mains supply before changing accessories or approaching parts that
move in use.
1
Children should be supervised to ensure that they do not play with the appliance.
Downloaded from www.vandenborre.be
EN
O
O
O
OOVERVIEW
VERVIEW
VERVIEW
VERVIEW VERVIEW
UNP
UNP
UNP
UNPUNPACKI
ACKI
ACKI
ACKIACKING
NG
NG
NG NG
Carefully unpack your chopper, as blades are very sharp.
Inspect the chopper for any signs of damage, paying particular attention to the mains cable. If any damage is found, do
not use it.
USING YOUR MINI CHOPPER
USING YOUR MINI CHOPPER
USING YOUR MINI CHOPPER
USING YOUR MINI CHOPPER USING YOUR MINI CHOPPER
1. Remove the power unit and lid from the receptacle and place the receptacle on a flat, stable and dry surface.
y To remove the lid, press tabs at both sides of the lid toward the centre then pull out the lid.
WARNING: The cutting blades are very sharp. Take great care when handling the blade attachment.
2

Termékspecifikációk

Márka: Proline
Kategória: Konyhai robotgép
Modell: MC 16

Szüksége van segítségre?

Ha segítségre van szüksége Proline MC 16, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Konyhai robotgép Proline

Proline

Proline MC 16 Útmutató

30 Július 2024
Proline

Proline FP35 Útmutató

14 Július 2024
Proline

Proline RP11 Útmutató

8 Július 2024

Útmutatók Konyhai robotgép

Legújabb útmutatók Konyhai robotgép

Costway

Costway EP24647 Útmutató

4 Április 2025
Concept

Concept SM3382 Útmutató

31 Március 2025
Reber

Reber 9508 N Útmutató

30 Március 2025
Reber

Reber 9500 N Útmutató

30 Március 2025
Reber

Reber 8683 N Útmutató

30 Március 2025
Ninja

Ninja BN650UK Útmutató

27 Március 2025
TriStar

TriStar MX-4804 Útmutató

15 Január 2025
Create

Create CHEF CHOP Útmutató

15 Január 2025