Használati útmutató Projecta IS910E

Projecta power bank IS910E

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Projecta IS910E (12 oldal) a power bank kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
1
LITHIUM EMERGENCY
JUMPSTARTER
P/No. IS910E, IS1210E
AND PORTABLE POWER BANK
2
IMPORTANT SAFETY INFORMATION
Please read this manual thoroughly before use and store in a safe place for future
reference.
WARNINGS
• Risk of explosive gas. Working in the vicinity of a lead-acid battery can be dangerous.
Batteries release explosive gases during normal operation, charging and while
jumpstarting a battery. Before using this Jumpstarter, read and follow the instructions
carefully. Follow all manufacturer’s instructions and warnings on the vehicle’s battery and
other equipment being used.
• Jumpstart 12V lead-acid batteries only. Do not use to jumpstart dry-cell batteries
commonly found in household appliances. These batteries may burst and cause injury
and/or property damage.
• Do not smoke, use matches, use a cigarette lighter, or allow a spark or flame near the
battery.
• Do not allow metal to come in contact with the battery posts. It may spark or short circuit
the battery and cause an explosion/fire.
• Always wear eye protection when operating the Jumpstarter.
• Remove rings, bracelets, necklaces and watches when working with a lead-acid battery.
• Contains a Lithium Cobalt battery and must be disposed of properly.
• Ensure correct polarity when connecting to vehicle.
• Although the Jumpstarter is rain proof it is not designed to be left outside for extended
periods or submerge in water.
• Although the Jumpstarter has been designed to protect the battery it is best to not drop
the Jumpstarter or try and pierce the Jumpstarter in anyway, as this can result in a fire.
If the Jumpstarter is physically damaged in any way do not use.
• Do not store the Jumpstarter in temperatures above 40
o Celsius or below -10
o Celsius, as
this can affect the health of the battery and if the temperature is above 120
o Celsius the
battery may catch fire.
• Not intended for people (including children) with reduced physical or mental capability.
• Once the vehicle is started disconnect the Jumpstarter immediately after starting.
• Do not try and charge via the USB output as this will damage the Jumpstarter and the
USB output.
IMPORTANT CHARGING INFORMATION
• Charge Jumpstarter prior to first use, this may take up to 4 to 8 hours depending on
the model.
• Fully recharge the Jumpstarter after every use to ensure your Jumpstarter is ready in
emergencies.
• To extend the life of your battery do not let the battery charge level fall below 20%.
• To extend the life of the Jumpstarter battery, do not charge above 45
oC or below 0oC.
3
FEATURES
IS910E
The IS910E is suitable for starting most 12V Petrol vehicles up to 6 litres.
IS1210E
The IS1210E is suitable for starting most 12V Petrol vehicles up to 7 litres and diesel
vehicles up to 3.2 litres.
12V USB CHARGING – Allowing the Jumpstarter to be charged from your vehicle
cigarette socket.
LITHIUM BATTERY – Increased storage life and a much more compact lightweight unit.
PREMIUM SPARK FREE CLAMPS – Ensuring safe Jumpstarting.
INCORPORATING HIGHEST RATE OF DISCHARGE BATTERY – For increased
starting capacity.
POWER BANK WITH 2.1AMP USB PORT – Allowing charging of phones, tablets and
other small portable devices.
EASY TO READ BATTERY STATUS INDICATOR – Shows battery status and when
recharge is required.
CONNECTION INDICATION – Confirms clamp connectivity and status.
INBUILT LED FLOOD LIGHT – Inbuilt LED flood light provides illumination for safer,
more convenient operation at night.
ADDED PROTECTION, SAFETY AND RELIABILITY
TOTAL SAFEGUARD PROTECTION – Includes Over voltage Protection, Battery &
Switch Over-temperature Protection, Short Circuit Protection, Over Current Protection,
Over Cranking Protection, Under-voltage Protection, Low voltage indication, Battery Cell
Balancing to protect the user, vehicle and Jumpstarter.
SMART MODULE – A second layer of protection, preventing the unit from over charging.
REVERSE POLARITY PROTECTION & ALARM – Prevents sparking from accidental
reverse connection. The alarm sounds when the Jumpstarter clamps are connected
incorrectly.
SURGE PROTECTION – IS910E/IS1210E features built in surge protection so you
can safely Jumpstart vehicles with EFI (electronic fuel injection) and computer
management systems.

Termékspecifikációk

Márka: Projecta
Kategória: power bank
Modell: IS910E

Szüksége van segítségre?

Ha segítségre van szüksége Projecta IS910E, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók power bank Projecta

Projecta

Projecta IS910E Útmutató

12 Augusztus 2024
Projecta

Projecta IS1210E Útmutató

25 Július 2024

Útmutatók power bank

Legújabb útmutatók power bank

CyberPower

CyberPower CPBC4400WI Útmutató

31 Március 2025
Cellular Line

Cellular Line THUNDER 5000 Útmutató

30 Március 2025
Cellular Line

Cellular Line ESSENCE TURBO 20000 Útmutató

30 Március 2025
SBS

SBS TEBB5000MAGSTAND Útmutató

28 Március 2025
EcoFlow

EcoFlow Rapid Útmutató

27 Március 2025
Hummer

Hummer H1 Útmutató

27 Március 2025
Hummer

Hummer H2 Útmutató

27 Március 2025
Hummer

Hummer H3 Útmutató

27 Március 2025
ACOPower

ACOPower HY-PWM-PX20A Útmutató

15 Január 2025
ACOPower

ACOPower HY-MY40 Útmutató

15 Január 2025