Használati útmutató Profoto RFi Softbox Octa

Profoto nincs kategorizálva RFi Softbox Octa

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Profoto RFi Softbox Octa (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
HOW TO
MOUNT YOUR
RFi SOFTBOX
RFi SOFTBOX
MOUNTING INSTRUCTION
1. Position the rounded rod end into the loops.
Color markings on the rod end should be
towards center.
4. Align the rods with the holes by slightly
bending the rods. By slightly bending the
opposite rod against your leg or the floor
the tension on the softbox will decrease and
mounting gets easier. Repeat the procedure
when disassembling the softbox.
7. Tighten the diffuser all around to prevent
leakage. Mount the outer diffuser close to the
silver side and not to the softbox outer edge.
The softbox is now ready to use. Now mount
it on your Profoto flash.
3. Check the color of the dot on the rods of your
softbox, e.g. if theres a blue dot you match it
with the blue dots on your RFi Speedring.
6. Attach and stretch the inner diffuser with
the Velcro attachment.
2. Press the rod fully into the corner pocket.
The rod should stay in the pocket even when
disassembling the softbox.
5. Tighten the softbox fabric with the Velcro to
prevent light from leaking out.
Octa
Strip
Square
Rectangular

Termékspecifikációk

Márka: Profoto
Kategória: nincs kategorizálva
Modell: RFi Softbox Octa

Szüksége van segítségre?

Ha segítségre van szüksége Profoto RFi Softbox Octa, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Profoto

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva