Használati útmutató Proaim FF-FCBE-01

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Proaim FF-FCBE-01 (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/5
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Focus Bee Follow Focus (FF FCBE- -01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box
A s s e m b ly Ma n u a l
15mm Lightweight Core Bridge Focus Hand Wheel
Swing Arm with Drive Gear 35
Teeth knob Pouch
Drive Gear 43 Teeth
2.5mm Allen Key
2
Loosen the knob of the Focus Hand Wheel
and aach the Core Bridge to it.
Feature: The lightweight core bridge transfers
the focus movement from the handwheel
mounted on your core bridge to the drive gear
that interfaces with your lens.
Aer aaching the Core Bridge, properly
secure it using the knob.
Loosen the Drive Gear and remove it.
Note: Get slip free movement with -
interchangeable drive gear, as both gears can
be conveniently mounted on either side of the
Swing Arm.
Follow Focus Setup
Aach the Swing Arm to the Core Bridge
and secure it using the knob as shown in
the image.
Feature: The Swing Arm has a 1:1.842 gear
rao, enabling wide and smooth focus
adjustments.
Focus Hand Wheel Tension Adjustment
Loosen the inbuilt grub screw of 15mm
Lightweight Core Bridge with the help of
Allen key and then adjust the focus hand
wheel accordingly.
Focus hand wheel can be adjust with the
help of the grub screw provided in the core
bridge as shown in the picture.
3
Feature: 43 Teeth Drive Gear has a ner gear
rao than 35 Teeth Drive Gear, allowing the
operator to focus more precisely, especially
when working with lenses with narrow eld
depth.
Press the locking lever aer mounng on
the rod and lock the posion.
The movement of the Handwheel can be
adjusted by loosening the knob of the Swing
Arm.
The movement of the Swing Arm can be
adjusted by loosening its tension adjust-
ment roller knob.
Aer adjusng the posion of the Core
Bridge, lock the desired posion by
ghtening the knob.
Feature: The Swing Arm features a built in -
tension adjustment roller that applies slight
pressure or tension on the gear mechanism to
eliminate unwanted movement in the focus
gear.
Mount the Follow Focus on the rod through
the Core Bridge.
Feature: 35 Teeth Drive Gear delivers a
slightly faster and less sensive focus control,
making it useful for wide angle lenses, -
especially in fast paced shoong scenarios.-
Remove the 35 Teeth Gear and aach the
43 Teeth Gear to the Swing Arm.

Termékspecifikációk

Márka: Proaim
Kategória: nincs kategorizálva
Modell: FF-FCBE-01

Szüksége van segítségre?

Ha segítségre van szüksége Proaim FF-FCBE-01, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Proaim

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025