Használati útmutató Pro-Cut KMS-13

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pro-Cut KMS-13 (13 oldal) a vágógép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/13
DELI MEAT SLICER
OWNES MANUAL
OPERATION INSTRUCTIONS MODELS
KMS-13
READ THIS MANUAL BEFORE USING THE EQUIPMENT FOR THE FIRST TIME. 507132-0
KMS-13
INSTRUCTIONS FOR OPERATION, SERVICE AND MAINTENANCE OF THIS EQUIPMENT
1
CONTENTS: PAGE
I. INTRODUCTION 2
II. UNPACKING 3
III. INSTALLATION 4
IV. 5OPERATION
V. 6KEY ELEMENTS IN CUTTING QUALITY PRODUCT
VI. 6CLEANING
VII. MAINTENANCE 7
VIII. EQUIPMENT SPECIFICATIONS 9
IX. 9ELECTRICAL DIAGRAM
X. -PARTS LIST KMS 13 10
XI. -FIGURA #6 KMS 13 ANODIZED 11
DELI MEAT SLICER
2
DELI MEAT SLICER
I.INTRODUCTION:
CONGRATULATIONS! YOU HAVE ACQUIRED A PRO-CUT SLICER WHICH IS MADE OF HIGH QUALITY LONG LASTING
MATERIALS THAT SHOULD GIVE YOU YEARS OF TROUBLE FREE OPERATION A- ND SERVICE. THIS SLICER IS MADE OF
ANODIZED ALUMINIUM PARTS, THAT MAXIMIZES THE AND IT IS ALSO THE BEST FOR THE CONTACT APPEARENCE
WITH FOOD PRODUCTS.
BEFORE YOU UNPACK YOUR NEW PRO-CUT SLICER, IT IS OF VITAL IMPORTANCE THAT YOU AND ANY PERSON THAT
WILL OPERATE THIS UNIT READ THOROUGHLY THIS MANUAL.
WARNING!:
THIS MACHINE IS DESIGNED TO CUT FOOD PRODUCTS AND IS BY NATURE
DANGEROUS IF IT IS NOT USED AND MAINTAINED PROPERLY AND CAUTIOUSLY
FOR SAFETY.
DO NOT ALLOW UNTRAINED OR UNQUALIFIED PERSONNEL OR CHILDREN TO OPERATE THIS
EQUIPMENT.
NEVER SERVICE,PERFORM CLEANING MAINTENANCE THIS UNIT CONNECTEDOR ON WHILE IT IS TO
A POWER .SOURCE
NEVER USE HANDS OR FINGERS TO FEED PRODUCTS TO CUT; DO NOT PLACE FINGERS OR HANDS
WITHIN 4" (FOUR INCHES), OF THE BLADE, WHILE IN OPERATION.
THE MOST DANGEROUS COMPONENT OF THIS EQUIPMENT IS THE BLADE; ALWAYS EXERCISE
EXTREME CAUTION WHILE CLEANING OR SERVICING AND USE CUT RESISTANT STEEL OR PLASTIC
GLOVES FOR CLEANING OR SERVICING.
DO NOT LEAVE THE MACHINE UNATTENDED WHILE IN OPERATION.
KMS-13

Termékspecifikációk

Márka: Pro-Cut
Kategória: vágógép
Modell: KMS-13

Szüksége van segítségre?

Ha segítségre van szüksége Pro-Cut KMS-13, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók vágógép Pro-Cut

Pro-Cut

Pro-Cut KMS-13 Útmutató

16 Augusztus 2024
Pro-Cut

Pro-Cut KDS-10 Útmutató

15 Augusztus 2024

Útmutatók vágógép

Legújabb útmutatók vágógép