Használati útmutató Polk PSW505

Polk mélynyomó PSW505

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Polk PSW505 (12 oldal) a mélynyomó kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
LS Models
Modèles LS
Modelos LS
900-ls
700-ls
500-ls
RT Models
Modèles RT
Modelos RT
90-rt
70-rt
50-rt
2 Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-5:30 PM EST, polkcs@polkaudio.com
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
9. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
10. WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects filled
with liquids, such as vases, should not be
placed on this apparatus.
Product Disposal—Certain interna-
tional, national and/or local laws and/
or regulations may apply regarding
the disposal of this product. For further
detailed information, please contact
the retailer where you purchased this
product or the Polk Audio Importer/
Distributor in your country. A listing of Polk Audio
Importer/Distributors can be found on the Polk Audio
website www.polkaudio.com or by contacting
Polk Audio at 5601 Metro Drive, Baltimore,
Maryland 21215, USA—Phone: +1 410 358-3600.
WARNING: Listen Carefully
Polk Audio loudspeakers and subwoofers are
capable of playing at extremely high volume levels,
which could cause serious or permanent hearing
damage. Polk Audio, Inc. accepts no liability for
hearing loss, bodily injury or property damage
resulting from the misuse of its products.
Keep these guidelines in mind and always use
your own good judgment when controlling volume:
 • Youshouldlimitprolongedexposureto
volumes that exceed 85 decibels(dB).
For more about safe volume levels, go to the
Occupational Health and Safety Administration
(OSHA) guidelines at http://www.osha.gov/dts/
osta/otm/noise/standards_more.html
TAKE INVENTORY
Inside each speaker container, you should
find the following:
1. One In-Ceiling Loudspeaker
2. One Sheer-Grille™
3. Mounting Template
4. Owner’s Manual
5. Registration Card
Important Note: If anything is missing or
damaged, or if your speaker fails to operate,
notify Polk Audio Customer Support Services
immediately at 800-377-7655.
INSTALLATION RECOMMENDATION
FOR OPTIMUM PERFORMANCE
Important Note: Vanishing Series Loudspeakers
are not magnetically shielded and should not be
placed closer than 1 (30cm) from a CRT (tube) '
television or video monitor.
Important Note:Youshouldhaveathorough
understanding of and adhere to all local building
and fire codes. Also, you should be familiar with
the area behind the wall or ceiling into which you
plan to install your speakers. Always use wire that
meets appropriate building and fire codes. Wiring
is best performed by an experienced professional.
When installing your loudspeakers, be aware of
the weight of your particular model and the sturdi-
ness of the material into which you are installing
the speakers. Be aware of any concealed studs,
electrical wiring or plumbing in the wall or ceiling
into which you are installing the speakers.
If you doubt that you possess the necessary
skills or tools, consult your Polk Audio dealer
or a professional installer.
WIRE RECOMMENDATIONS
(minimum recommended)
Runs Gauge
Lengths up to 25' 18 or 16
Lengths greater than 25' 16 or 14
but less than 50'
Lengths greater than 50' 14 or 12
but less than 75'
Lengths greater than 75' 12
IMPORTANT INFORMATION BEFORE
YOU INSTALL YOUR LOUDSPEAKERS
Wall Or Ceiling Surface Preparation
If you’re installing your Vanishing Series speaker
into a heavily textured wall or ceiling (e.g. stucco
or popcorn finish), you must prepare the wall
surface immediately around the speaker
cutout. Sanding and smoothing the wall or
ceiling surface will ensure the speaker and
grille both seat properly and flat to the surface.
LOUDSPEAKER INSTALLATION
You will need:
 • Pencilformarkingthelocationofinstallation.
 • Keyholesaw,utilityknifeormaterial-
appropriate tool for cutting drywall
or other wall material.
 • Screwdriver,preferablypowered,
with Phillips Head bit.
 • Powerdrillwithappropriatebit
(optional, for starting wall cut).
Trace around the template.
Cut the hole with the appropriate tool.
CROSSOVER WARNING
Exercise extreme caution when installing this
loudspeaker so you do not damage the crossover.
SECURITY EYEBOLT
YourVanishingSeriesin-ceilingloudspeaker
has an eyebolt on the back of the speaker that
can be used for an extra measure of installation
security. Follow standard building code installation
procedures in your area.
eyebolt
For more information visit our website at www.polkaudio.com 3
IMPORTANT INFORMATION SHOULD
YOU CHOOSE TO PAINT YOUR GRILLES
Because of its ultra-thin profile, the Vanishing
Series Sheer-Grille
™ requires a specific painting
procedure to ensure smooth, even coverage.
Important Note: Do not remove the grille
scrim before painting.
Paint Recommendation
We highly recommend you use a can of spray
paint matched to the ceiling color you want
the Sheer-Grilles to blend with.
Important Note: Never use a brush or
roller to paint the grilles, as this will clog
the perforated holes.
To paint the Sheer-Grille
1. Elevate the Sheer-Grille off of a flat surface.
This will ensure even coverage of the grille
frame and make it easier to pick up.
Mounting Idea: A single spray can cap
will raise the grille high enough.
2. Hold the spray paint about 12 from "
the grille and at a 45° angle.
3. Apply one light, thin coat, moving evenly
side to side over the grille, then work your
way around the perimeter of the grille
to ensure you cover the grille frame.
4. After each application of paint, wait
approximately 1 minute, rotate the
grille 90°, and apply the next thin coat.
Important Note:Youmustrotatethegrille
90°. Use your hands to define the next 90°
rotation and always rotate the grille in the
same direction of travel.
5. Three light, even applications should cover
the grille and frame adequately. Remember
to work your way around the grille frame
to cover it evenly and completely.
ROOM ENvIRONMENT CONTROLS
Room Switch
If your listening room is very reflective, with
smooth sheetrock walls, hardwood floors and
non-cushioned furniture, the sound will be
overly “bright” and unnatural.
Engaging the Room Switch (Reflective) compen-
sates for the effect of reflectivity in a “hard room”
by attenuating only the portion of the tweeter
response that can cause harshness resulting
in listener fatigue. This flattens room response
without hindering higher frequency response,
for warmer, more realistic sound and more
accurate imaging.
If your listening room is not highly reflective,
that is it has curtains, carpeting, and cushioned
furniture, leave the Room Switch in its Normal
setting (Norm).
Wall Distance Switch ( )LS models only
In-ceiling loudspeakers excel when placed
more than 2' (60cm) from side walls. If position
limitations demand that in-ceiling loudspeakers
be installed closer than 2' (60cm) from side walls,
the proximity of the surface can result in a response
“bump” between 50Hz and 200Hz. This can cause
in-ceiling speakers to sound “boomy.” The
“Wall Distance” switch flattens response
and eliminates “boominess” without sacrificing
deep bass response, for more lifelike sound.
Reflective / Norm
Room
Wall Dist.
>2'
(60cm)(60cm)
<2'

Termékspecifikációk

Márka: Polk
Kategória: mélynyomó
Modell: PSW505

Szüksége van segítségre?

Ha segítségre van szüksége Polk PSW505, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mélynyomó Polk

Polk

Polk Signature Elite ES12 Útmutató

2 Január 2025
Polk

Polk Signature Elite ES8 Útmutató

2 Január 2025
Polk

Polk DB1040 Útmutató

10 Október 2024
Polk

Polk PSWi-8M Útmutató

2 Szeptember 2024
Polk

Polk PSW110 Útmutató

27 Augusztus 2024
Polk

Polk PSW125 Útmutató

8 Augusztus 2024
Polk

Polk DB1040DVC Útmutató

4 Augusztus 2024
Polk

Polk DB1240DVC Útmutató

4 Augusztus 2024
Polk

Polk MM 1242 DVC Útmutató

3 Augusztus 2024
Polk

Polk Monitor XT12 Útmutató

2 Augusztus 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology

Phase Technology IW200-II Útmutató

4 Április 2025
Wet Sounds

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025
SoundTube

SoundTube CM1001D Útmutató

2 Április 2025
JL Audio

JL Audio FS108-W5 Útmutató

31 Március 2025
Phase Technology

Phase Technology PL-12p Útmutató

30 Március 2025
ETON

ETON Graphit 8-2 Útmutató

19 Március 2025
ETON

ETON Graphit 8-4 Útmutató

19 Március 2025
ETON

ETON Graphit 10-4 Útmutató

19 Március 2025
ETON

ETON MW 10 FLAT Útmutató

19 Március 2025
ETON

ETON PW 8 Útmutató

19 Március 2025