Használati útmutató Planet POE-E101
Planet
wifi ismétlő
POE-E101
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Planet POE-E101 (4 oldal) a wifi ismétlő kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 4.8 csillagra
Oldal 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
Introduction
1.1 Packet Contents
Thank you for purchasing PLANET POE-E101 IEEE
802.3af Power over Ethernet Extender, your Power
over Ethernet Extender package shall contains following
contents:
Check the contents of your package for following parts:
Power over Ethernet Extender x 1
User's Manual x 1
If any of these pieces are missing or damaged, please
contact your dealer immediately, if possible, retain the
carton including the original packing material, and use
them against to repack the product in case there is a
need to return it to us for repair.
1.3 TechnicalSpecication
Model POE-E101
Interfaces
LAN IN
1 x 10/100Base-TX Ethernet with IEEE
802.3af PoE “Data + DC” in Auto
MDI/MDI-X, Auto-negotiation RJ-45
connector
LAN OUT
1 x 10/100Base-TX Ethernet with IEEE
802.3af PoE “Data + DC” out Auto
MDI/MDI-X, Auto-negotiation RJ-45
connector
Power over Ethernet
PoE
Standard IEEE 802.3af Power over Ethernet
PoE Power
Supply Type Mid-Span / Type B
PoE Power
Output 48V DC, 270mA, Max. 13 Watts
Power Pin
Assignment 4/5(+), 7/8(-)
2.2 Ports Connection
IN Port
Connect the PoE IN port from following
802.3af PSE device through a CAT-5e/6
UTP cable:
• PoE Injector
• PoE Injector Hub
• PoE Ethernet Switch
• Previous POE-E101
OUT Port
Connect the PoE OUT port to following
802.3af PD device through a CAT-5e/6
UTP cable:
• PoE IP Camera
• PoE VoIP Phone
• PoE Wireless AP
• PoE Splitter
• Next POE-E101
2.3 LEDDenition:
LED Color Function
PoE IN Green Lights to indicate the port is
providing 48V DC in-line power.
LNK/
ACT Green
Lights
to
indicate
the
port
is link up.
Blink: indicate that the extender is
actively sending or receiving data
over port.IN
PoE
OUT Green Lights to indicate the port is
providing 48V DC in-line power.
Standards Conformance
Regulation
Compliance FCC Part 15 Class A, CE
Standard
Compliance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 10/100Base-TX Fast
Ethernet
IEEE 802.3af Power over Ethernet PSE
/ Mid-Span
IEEE 802.3af Power over Ethernet PD /
Mid-Span
IEEE 802.3x Flow Control
Environment
Operating
Temperature:
0 ~ 50 Degree C
Relative Humidity:
0 ~ 95% (non-condensing)
Storage
Temperature:
-40 ~ 85 Degree C
Relative Humidity:
5 ~ 95% (non-condensing)
1.2 Key Features
Complies with IEEE 802.3af Power over Ethernet
Extends the range of PoE an additional 100 meters
(328ft.)
Forwards both Ethernet data and PoE power to
remote device
Auto-detect and protect of PoE equipment from being
damaged by incorrect installation
Multiple units, daisy-chain installation support
No external power cable installation required
Compact size, Wall-mountable design
Plug-and-Play installation
Hardware Specication
Data Rate 10/100Mbps
Switch
Architecture Store-and-Forward
Switch
Throughput 148810pps@64Bytes
Latency 7.840µs
Maximum
Frame Size 1552Bytes
Flow Control Back pressure for Half-Duplex
IEEE
802.3x
Pause
Frame
for
Full-Duplex
LED
Indicators
• 1 x PoE IN (Green)
• 1 x LAN Data (Green)
• 1 x PoE OUT (Green)
Protection ESD (Ethernet) : 6KV (TBD)
Surge (EFT for power) : 6KV (TBD)
Dimension
(W x D x H) 94 x 70 x 26 mm
Weight 215g
Power
Requirement
IEEE 802.3af compliant with voltage
within 44V-56V DC
Power
Consumption 2 Watts (system maximum)
Mechanical Metal / Wall Mountable
Cable TIA/EIA-568, Category 5/5e cable
Hardware Description
2.1 Product Outlook
Hardware Installation
This product provides two different running speeds –
10Mbps, 100Mbps in the same device and automatically
distinguishes the speed of incoming connection.
This section describes the hardware features of
POE-E101. Before connecting any network device to the
POE-E101, read this chapter carefully.
3.1 Before Installation
Before your installation, it is recommended to check
your network environment. If there is any far away IEEE
802.3af devices need to power on, the POE-E101 can
provide you a way to supply power for this Ethernet
device conveniently and easily.
The POE-E101 is installed between the PSE (Power Source
Equipment) and the PD (Powered Device); it is powered
by PSE and forwards the Ethernet data and remaining
POE power to the PD. The POE-E101 doesn’t require
an external power supply and it can be installed easily
just plug and play; that means the operator does not
need to congure the POE-E101. The POE-E101 injects
power to the PDs without affecting the data transmission
performance. It offers a cost effective and quick solution
to extend power and data an additional 100m.
Note
The POE-E101 can be installed with third-party
device if the device complied with IEEE 802.3af
standard.
Termékspecifikációk
| Márka: | Planet |
| Kategória: | wifi ismétlő |
| Modell: | POE-E101 |
Szüksége van segítségre?
Ha segítségre van szüksége Planet POE-E101, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók wifi ismétlő Planet
10 Október 2024
30 Szeptember 2024
22 Szeptember 2024
3 Augusztus 2024
31 Július 2024
29 Július 2024
26 Július 2024
26 Július 2024
20 Július 2024
19 Július 2024
Útmutatók wifi ismétlő
- wifi ismétlő DJI
- wifi ismétlő Hama
- wifi ismétlő Manhattan
- wifi ismétlő Deltaco
- wifi ismétlő Atlona
- wifi ismétlő Aukey
- wifi ismétlő Smart-AVI
- wifi ismétlő Mikrotik
- wifi ismétlő Medion
- wifi ismétlő Nitek
- wifi ismétlő Speco Technologies
- wifi ismétlő Multi-link
- wifi ismétlő EnGenius
- wifi ismétlő Comtrend
- wifi ismétlő Huawei
Legújabb útmutatók wifi ismétlő
30 Március 2025
30 Március 2025
25 Március 2025
13 Január 2025
12 Január 2025
6 Január 2025
4 Január 2025
3 Január 2025
31 December 2025
31 December 2025