Használati útmutató Planet GSD-1121XP

Planet kapcsoló GSD-1121XP

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Planet GSD-1121XP (4 oldal) a kapcsoló kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET 8-Port 10/100/1000T 802.3at PoE +
2-Port 2.5G 802.3at PoE + 1-Port 10G SFP+ Ethernet Switch, GSD-1121XP.
In the following sections, the term means the “802.3at PoE+ Switch”
GSD-1121XP.
Open the box of the 802.3at PoE+ Switch and carefully unpack it. The
box should contain the following items:
802.3at PoE+ Switch x 1 User’s Manual x 1 Power Cord x 1
SFP Dust Cap
x 1 Screws x 8 Rack-mounting
Brackets x 2 Rubber Feet x 4
If any of these are missing or damaged, please contact your dealer
immediately; if possible, retain the carton including the original packing
material, and use them again to repack the product in case there is a
need to return it to us for repair.
2.2 LED Indicators
System
LED Color Function
PWR Green Lit: It indicates it has power.
Per Gigabit TP Port
2
1
4
3
6
5
8
7
LED Color Function
PoE-in-Use Amber
Lights to indicate that the port is providing
PoE to remote powered device.
O to indicate that the port is not a PoE
powered device (PD).
10/100/1000
LNK/ACT Green
Lights to indicate that the copper port is
successfully connecting to the network at
10/100/1000Mbps.
Blinks to indicate the copper port is receiving
or sending data.
3. Hardware Installation
3.1 Rack Mounting
To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the
instructions described below.
Step 1: Place your 802.3at PoE+ Switch on a hard at surface, with
the front panel positioned towards your front side.
Step 2: Attach a rack-mount bracket to each side of the 802.3at PoE+
Switch with supplied screws attached to the package. Figure
3-1 shows how to attach brackets to one side of the 802.3at
PoE+ Switch.
PoE-in-Use
ACTLNK
2
1
4
3
6
5
8
79 10 11
PWR
11
ACT
LNK10G
2.5G
10G
SFP
+
Figure 3-1: Attaching the Brackets to the 802.3at PoE+ Switch.
Caution
You must use the screws supplied with the mounting
brackets. Damage caused to the parts by using incorrect
screws would invalidate the warranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the
opposite side.
2.3 Rear Panel
The rear panel of the 802.3at PoE+ Switch indicates an AC power
socket and a switch, which accepts input power from 100 to 240V AC,
50-60Hz, 2.5A.
100-240V , 2.5A max.
50/60Hz
Figure 2-2: GSD-1121XP Switch Rear Panel
AC Power Receptacle
Power
Notice
The device is a power-required device, which means
it will not work till it is powered. If your networks
should be active all the time, please consider using UPS
(uninterrupted power supply) for your device. It will
prevent you from network data loss or network downtime.
Power
Notice
In some areas, installing a surge suppression device may
also help to protect your 802.3at PoE+ Switch from being
damaged by unregulated surge or current to the 802.3at
PoE+ Switch or the power adapter.
2. Hardware Introduction
2.1 Switch Front Panel
The front panel of the 802.3at PoE+ Switch consists of 8 auto-sensing
10/100/1000BASE-T RJ45 ports, 2 auto-sensing 100/1G/2.5GBASE-T RJ45
ports and 1 10GBASE-X SFP+ port. Figure 2-1 shows the front panel of
the 802.3at PoE+ Switch.
Front View
PoE-in-Use
ACTLNK
2
1
4
3
6
5
8
7 9 10 11
PWR
11
ACT
LNK10G
2.5G
10G
SFP+
Figure 2-1: GSD-1121XP Front Panel
■ GigabitTPInterface
Eight 10/100/1000BASE-T RJ45 ports with 802.3af/at PoE+ injector
function, and auto-MDI/MDI-X
■ 2.5GTPInterface
Two 100/1G/2.5GBASE-T RJ45 ports with 802.3af/at PoE+ injector
function, and auto-MDI/MDI-X
■ 10GSFP+Port
One 10GBASE-X SFP+ port for transceiver module, enabling to have
a networking distance of 300 meters to 2km (multi-mode ber) and
10/20/40/60/80 kilometers (single-mode ber)
Per 2.5G TP Port
9 10
2.5G
LED Color Function
PoE-in-Use Amber
Lights to indicate that the port is providing
PoE to remote powered device.
O to indicate that the port is not a PoE
powered device (PD).
100/1G/2.5G
LNK/ACT Green
Lights to indicate that the copper port is
successfully connecting to the network at
100/1000/2500Mbps.
Blinks to indicate the copper port is receiving
or sending data.
10G SFP+ Port
PWR
11
ACT
LNK10G
11
10G
SFP+
LED Color Function
Fiber
LNK/ACT Amber
Lights to indicate that the ber optic port
is successfully connecting to the network at
10Gbps.
Blinks to indicate the ber optic port is
receiving or sending data.
2.4 GroundingtheDevice
Users MUST complete grounding wired with the device; otherwise, a
sudden lightning could cause fatal damage to the device.
100-240V , 2.5A max.
50/60Hz
Earth Ground
Note
EMD (Lightning) DAMAGE IS NOT CONVERED UNDER
WARRANTY.
Step 5: After the brackets are attached to the 802.3at PoE+ Switch,
use suitable screws to securely attach the brackets to the
rack, as shown in Figure 3-2.
PoE-in- U s e
ACTLNK
2
1
4
3
6
5
8
79 10 11
PWR
11
ACT
LNK10G
2.5G
10G
SFP
+
Figure 3-2: Mounting the 802.3at PoE+ Switch in a Rack
Step 6: Connect your 802.3at PoE+ Switch to 802.3af/802.3at
complied PDs and other network devices.
A. Connect one end of a standard network cable to the
100/1G/2.5GBASE-T RJ45 ports or 10GBASE-X SFP+ port on the
front panel of the 802.3at PoE+ Switch.
B. Connect the other end of the cable to the network devices such as
printer servers, workstations or routers, etc.
Step 7: Supply power to the 802.3at PoE+ Switch.
A. Connect one end of the power cable to the 802.3at PoE+ Switch.
B. Connect the power plug of the power cable to a standard wall
outlet.
When the 802.3at PoE+ Switch receives power, the Power LED should
remain solid Green.
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
3.2 InstallingtheSFP+Transceiver
The sections describe how to insert an SFP+ transceiver into an SFP+
port of the 802.3at PoE+ Switch.
The SFP+ transceivers are hot-pluggable and hot-swappable. You can
plug in and out the transceiver to/from any SFP+ port without having to
power down the 802.3at PoE+ Switch, as the Figure 3-3 shows.
PoE-in-Use
ACTLNK
2
1
4
3
6
5
8
79 10 1
PWR
11
ACT
LNK10G
2.5G
10G
SFP+
MTB-Series SFP+ Transceiver
LC Fiber Cable
1
2
Figure5-3: Plugging in the SFP+ Transceiver
Approved PLANET SFP+ Transceivers
PLANET 802.3at PoE+ Switch supports both single mode and multi-
mode SFP+ transceivers. The following website link of approved PLANET
SFP+ transceivers is correct at the time of publication:
http://www.planet.com.tw/en/product/product.php?id=11027
Note
It is recommended to use PLANET SFP+ on the 802.3at
PoE+ Switch. If you insert an SFP+ transceiver that is not
supported, the 802.3at PoE+ Switch will not recognize it.
Weight 1711g
Power Requirements 100~240V AC, 50/60Hz
Power Consumption/
Dissipation
124 watts @ AC 110V
125 watts @ AC 240V
LED
1 x LED for Power:
Green: AC Power
2 x LED for Per Copper Port (Port-1~Port-8):
Green: 10/100/1000 LNK/ACT
Amber: PoE-in-Use
2 x LED for Per Copper Port (Port-9~Port-10):
Green: 100/1G/2.5G LNK/ACT
Amber: PoE-in-Use
1 x LED for SFP+ interface (Port-11)
Amber: 10G LNK/ACT
Switching Specication
Switch Processing
Scheme Store-and-Forward
Switch fabric 46Gbps
Throughput
(packet per second) 34.2Mpps @64 bytes
Address Table 16K entries
Jumbo Frame 9600 Bytes
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
1. Before we connect the 802.3at PoE+ Switch to the other network
device, we have to make sure both sides of the SFP+ transceivers
are with the same media type, for example, 10GBASE-SR to
10GBASE-SR; 10GBASE-LR to 10GBASE-LR.
2. Check whether the ber-optic cable type matches with the SFP+
transceiver requirement.
To connect to 10GBASE-SR SFP+ transceiver, please use the
multi-mode ber cable with one side being the male duplex LC
connector type.
To connect to 1000BASE-LR SFP+ transceiver, please use the
single-mode ber cable with one side being the male duplex LC
connector type.
4.ProductSpecications
Model GSD-1121XP
Hardware Specications
Copper Ports
8 x 10/100/1000BASE-T RJ45
2 x 100/1G/2.5GBASE-T RJ45
With 802.3at/af PoE+ injector function
Auto-MDI/MDI-X, auto-negotiation
SFP+ Port 1 x 10GBASE-X SFP+ interface
ESD Protection 6KV contact/8KV air
EFT Protection 1KV
Installation Desktop or rack-mount installation
Dimensions
(W x D x H) 280 x 214 x 44mm
Power over Ethernet
PoE Standard IEEE 802.3at/af PoE Plus, PSE
PoE Power Supply
Type End-span
PoE Power Output Per port 52V DC, max. 30 watts
Power Pin
Assignment 1/2 (+), 3/6 (-)
PoE Power Budget 120 watts
Standards Conformance
Standards
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3ae 10Gb/s Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az EEE (Energy Ecient Ethernet)
IEEE 802.3bz 2.5G BASE-T
Regulatory
Compliance FCC Part 15 Class B, CE
Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
5.PhysicalDimensions
The GSD-1121XP 802.3at PoE+ Switch dimensions (W x D x H): 280 x
214 x 44mm
100-240V , 2.5A max.
50/60Hz
Unit: mm
PoE-in-U se
ACTLNK
2
1
4
3
6
5
8
79 10 11
PWR
11
ACT
LNK10G
2.5G
10G
SFP+
6.CustomerSupport
Thank you for purchasing PLANET products. You can browse our online
FAQ resource on PLANET web site rst to check if it could solve your
issue. If you need more support information, please contact PLANET
support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq.php
Support team mail address:
support@planet.com.tw
Copyright © PLANET Technology Corp. 2021
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.

Termékspecifikációk

Márka: Planet
Kategória: kapcsoló
Modell: GSD-1121XP

Szüksége van segítségre?

Ha segítségre van szüksége Planet GSD-1121XP, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók kapcsoló Planet

Planet

Planet GSD-1121XP Útmutató

19 Szeptember 2024
Planet

Planet FSD-504HP Útmutató

14 Szeptember 2024
Planet

Planet IGTP-805AT Útmutató

1 Szeptember 2024
Planet

Planet IPM-16230 Útmutató

31 Augusztus 2024
Planet

Planet FSD-804P Útmutató

31 Augusztus 2024
Planet

Planet UPOE-1600G Útmutató

29 Augusztus 2024
Planet

Planet IPOE-162S Útmutató

29 Augusztus 2024
Planet

Planet IPOE-162 Útmutató

29 Augusztus 2024
Planet

Planet XGS3-24242 Útmutató

29 Augusztus 2024
Planet

Planet POE-171 Útmutató

29 Augusztus 2024

Útmutatók kapcsoló

Legújabb útmutatók kapcsoló

Tork

Tork SS700ZA Útmutató

9 Április 2025
Cudy

Cudy FS1024 Útmutató

9 Április 2025
Lancom

Lancom GS-2412 Útmutató

5 Április 2025
Lancom

Lancom GS-2412P Útmutató

5 Április 2025
Lancom

Lancom GS-2426 Útmutató

5 Április 2025
Lancom

Lancom GS-2426P Útmutató

5 Április 2025
Hager

Hager ARF970D Útmutató

3 Április 2025
Hager

Hager ARF920D Útmutató

3 Április 2025
Fantini Cosmi

Fantini Cosmi B12BN Útmutató

2 Április 2025
Fantini Cosmi

Fantini Cosmi B12DN Útmutató

2 Április 2025