Használati útmutató Phottix Laso
Phottix
Távoli trigger
Laso
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Phottix Laso (31 oldal) a Távoli trigger kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/31
Phottix Laso TTL Flash Trigger_Transmitter
Thank you for purchasing a Phottix Product
Note: Before using the Phottix Laso TTL Flash Trigger, please read this instruction
manual carefully, while also referring to the instruction manuals of your camera, flash
and other relevant devices.
Warnings
1. This product is a precise electronic instrument. Do not expose to damp
environments or dust.
2. Please shut down the power of all devices when installing the wireless trigger.
3. Do not drop or crush.
4. Do not use the wireless trigger at flammable, explosive or high temperature
environment.
5. Do not use harsh chemicals or solvents to clean the body. Use a soft cloth or lens
paper.
6. Remove batteries from the wireless trigger if not being used for an extended
period.
7. Interference: The Phottix Laso wireless trigger transmits radio signals at 2.4GHz.
Its performance can be affected by electrical current, magnetic fields, radio signals,
wireless routers, cellular phones, and other electronic devices. Environmental
objects, such as large buildings or walls, trees, fences, or cars can also affect
transmission performance. If your wireless trigger can’t be triggered, move its
location slightly.
FCC Interference Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the
followingtwo conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Phottix Laso Wireless Trigger for Canon/Transmitter
The Phottix Laso transmitter is used for wireless flash shooting. It can control up to 5
groups (15 units) of radio-enabled Canon Speedlites, as well as non-wireless Canon
ETTL Speedlites by using the Phottix Laso receiver. The transmitter supports
multiple flash modes and shooting approaches including E-TTL II/E-TTL, Manual,
MULTI, Ext.A and Linked Shooting.
Table of Contents
I. Parts
II. Preparation Before Use
III. The LCD Display
IV. Wireless Flash Shooting: Radio Transmission
1. Wireless Flash Setting
2. ETTL: Fully Automatic Wireless Flash Shooting
3. Using Fully Automatic Wireless Flash
4. ETTL: Wireless Multiple Flash Shooting with Flash Ratio
5. M:Wireless Multiple Flash Shooting with Manual Flash Output
6. Multi:
7. Gr: Shooting with a Different Flash Mode for Each Group
8. Linked Shooting
V. Setting Transmitter Functions with Camera Operations
VI. Customizing the Transmitter
1.C.Fn: Setting Custom Functions
2.P.Fn: Setting Personal Functions
VII. Technical Specification
VII. Trouble Shooting Guide
I.
I.
I.
I.I.Parts
1.<LINK> indication light: Radio
transmission confirmation lamp
2.LCD panel
3.Function Button 3
4. Function Button 2
5. Function Button 1
6.<MODE>: Flash mode button
7.< >: Charge lamp/Test flash button；
8.< >: Select/Set button
9.< >: Select dial
10.Mounting foot lock lever
11.Battery compartment cover
12.Function button 4
13. < >: Linked shooting button
14.Power button
15.Flash exposure confirmation lamp
16.Lock-release button
17.USB port
18.Remote release terminal
19.Contacts
20.Mounting foot
21.Locking pin
22.AF assist light
Termékspecifikációk
| Márka: | Phottix |
| Kategória: | Távoli trigger |
| Modell: | Laso |
Szüksége van segítségre?
Ha segítségre van szüksége Phottix Laso, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Távoli trigger Phottix
24 Július 2024
Útmutatók Távoli trigger
- Távoli trigger Sony
- Távoli trigger Fujifilm
- Távoli trigger DSC
- Távoli trigger Impact
- Távoli trigger Quantum
- Távoli trigger Hensel
- Távoli trigger Vello
- Távoli trigger Yongnuo
- Távoli trigger Elinchrom
- Távoli trigger Multiblitz
- Távoli trigger Broncolor
- Távoli trigger Angler
- Távoli trigger RadioPopper
- Távoli trigger Cactus
- Távoli trigger Westcott
Legújabb útmutatók Távoli trigger
11 December 2024
11 December 2024
1 Október 2024
1 Október 2024
1 Október 2024
1 Október 2024
13 Szeptember 2024
9 Szeptember 2024
31 Augusztus 2024
31 Augusztus 2024