Használati útmutató Phoenix Gold SX1200.5

Phoenix Gold Vevő SX1200.5

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Phoenix Gold SX1200.5 (16 oldal) a Vevő kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/16
Amplifier Manual
Manual del Amplificador
Manuel del’amplificateur
Models: SX400.1, SX600.1, SX1200.1, SX800.4, SX1200.5
Features: Caractéristiques:
Compact Size for Easy Installation
High Eciency Class D Topology
High and Low Pass Crossovers
ADAPT Power Management System
(SX800.4, SX1200.5)
Surface Mount Component Technology
Direct Insert Power and Speaker Terminals
Audio Precision Quality Control Verication
High Temperature Plexiglass cover
RMD - Remote Monitoring Display Port
RBCF- Remote subwoofer level control included
(except SX800.4)
Topologie de classe D de gamme complète
Petit format pour faciliter l’installation
Filtres croisés passe-haut et passe-bas
ADAPT système d’alimentation
(SX800.4, SX1200.5)
Technologie de composant monté en surface
Terminaux d’alimentation et de haut-parleurs à
insertion directe
Vérication du contrôle de la qualité de la précision audio
Couvercle de plexiglas résistant aux températures élevées
RMD - Entrée De Lachage de Tension a Distance
RBCF- Niveau de contrôle de passe-bas inclus (sauf
SX800.4)
Características:
Tamaño compacto para fácil instalación
Alta eciencia de clase D Topología
Crossovers paso alto y bajo
ADAPT Sistema de Gestión de Energía
(SX800.4, SX1200.5)
Tecnología “Surface Mount Component”
Conexiones directas de terminales de poder y de
parlantes
Control de vericación de calidad de precisión de audio
Cubierta de Plexiglás resistente a altas temperaturas
RMD - Puerto de display para monitoreo remoto
RBCF -Control de nivel de Subwoofer remoto incluido
(excepto SX800.4)
Amplier Owner’s Manual
Phoenix Gold • www.phoenixgold.com
SPECIFICATIONS
SX400.1 SPECIFICATIONS
Frequency Response: ± 1dB from 20Hz to 300Hz
Signal to Noise Ratio: >90dB
Low Pass Crossover: 12dB per Octave
Subsonic Filter: 12dB per Octave
Low Pass Crossover Range: 30Hz to 300Hz
Subsonic Crossover Range: 10Hz to 55Hz
Bass Boost @ 45Hz: 0 to +18dB
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 2 ohms
Typical Eciency: 80%
Damping Factor: Greater than 200
Variable Phase Adjustment: 0 to 180 Degrees
RMS Power Output 250w x 1 @ 4 ohms
400w x 1 @ 2 ohms
Power/Ground Wire Size: 8 Gauge
Recommend Power Wire Fuse: 40a
Dimensions (Includes Feet): 7.4” L x 6.9” W x 2.0” H
189mm L x 176mm W x 50mm H
SX600.1 SPECIFICATIONS
Frequency Response: ± 1dB from 20Hz to 300Hz
Signal to Noise Ratio: >90dB
Low Pass Crossover: 12dB per Octave
Subsonic Filter: 12dB per Octave
Low Pass Crossover Range: 30Hz to 300Hz
Subsonic Crossover Range: 10Hz to 55Hz
Bass Boost @ 45Hz: 0 to +18dB
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 2 ohms
Typical Eciency: 80%
Damping Factor: Greater than 200
Variable Phase Adjustment: 0 to 180 Degrees
RMS Power Output 400w x 1 @ 2 ohms
600w x 1 @ 1 ohm
Power/Ground Wire Size: 4 Gauge
Recommend Power Wire Fuse: 60a
Dimensions (Includes Feet): 10.1” L x 6.9” W x 2.0” H
256mm L x 176mm W x 50mm H
SX1200.1 SPECIFICATIONS
Frequency Response: ± 1dB from 20Hz to 300Hz
Signal to Noise Ratio: >90dB
Low Pass Crossover: 12dB per Octave
Subsonic Filter: 12dB per Octave
Low Pass Crossover Range: 30Hz to 300Hz
Subsonic Crossover Range: 10Hz to 55Hz
Bass Boost @ 45Hz: 0 to +18dB
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 1 ohm
Typical Eciency: 80%
Damping Factor: Greater than 200
Variable Phase Adjustment: 0 to 180 Degrees
RMS Power Output 800w x 1 @ 2 ohms
1200w x 1 @ 1 ohm
Power/Ground Wire Size: 4 Gauge
Recommend Power Wire Fuse: 120a
Dimensions (Includes Feet): 12.3” L x 6.9” W x 2.0” H
314mm L x 176mm W x 50mm H
IMPORTANT: A power birth certicate is included for each amplier. SX ampliers
are conservatively rated and will exceed their RMS power rating shown here. All
RMS power ratings and measurements are at 14.4 volts with no more than 1% THD.
Phoenix Gold • www.phoenixgold.com
Amplier Owners Manual
RMS Power Output 125w x 4 @ 4 ohms Stereo
200w x 4 @ 2 ohms Stereo
400w x 2 @ 4 ohms Bridged
Power/Ground Wire Size: 4 Gauge
Recommend Power Wire Fuse: 60a
Dimensions (Includes Feet): 11.2” L x 6.9” W x 2.0” H
284mm L x 176mm W x 50mm H
Specifications
SUBWOOFER CHANNEL:
Frequency Response: ± 1dB from 20Hz to 250Hz
Signal to Noise Ratio: >100dB
Low Pass Crossover: 12dB per Octave
Low Pass Crossover Range: 15Hz to 250Hz
Bass Boost @ 45Hz: 0 to +18dB
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 2 ohms
Typical Eciency: 80%
Damping Factor: Greater than 200
SX1200.5 SPECIFICATIONS
FRONT AND REAR CHANNELS:
Frequency Response: ± 1dB from 20Hz to 20kHz
Signal to Noise Ratio: >100dB
High and Low Pass Crossovers: 12dB per Octave
Front/Rear High Pass Crossover Range: 15Hz to 250Hz
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 4 ohms Bridged/2 ohms Stereo
Typical Eciency: 80%
Damping Factor Greater than 200
RMS Power Output 250w x 1 @ 4 ohms
400w x 1 @ 2 ohms
Recommend Power Wire Fuse: 80a
Power/Ground Wire Size: 4 Gauge
Dimensions (Includes Feet): 12.3” L x 6.9” W x 2.0” H
314mm L x 176mm W x 50mm H
RMS Power Output 125w x 4 @ 4 ohms Stereo
200w x 4 @ 2 ohms Stereo
400w x 2 @ 4 ohms Bridged
SX800.4 SPECIFICATIONS
Frequency Response: ± 1dB from 20Hz to 20kHz
Signal to Noise Ratio: >100dB
High and Low Pass Crossovers: 12dB per Octave
Crossover Range: 40Hz to 400Hz
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 4 ohms Bridged/2 ohms Stereo
Typical Eciency: 80%
Damping Factor Greater than 200

Termékspecifikációk

Márka: Phoenix Gold
Kategória: Vevő
Modell: SX1200.5

Szüksége van segítségre?

Ha segítségre van szüksége Phoenix Gold SX1200.5, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Vevő Phoenix Gold

Útmutatók Vevő

Legújabb útmutatók Vevő