Használati útmutató Penton APC6BT/EN

Penton hangszóró APC6BT/EN

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Penton APC6BT/EN (1 oldal) a hangszóró kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
RoHS
Penton UK Ltd
Unit 2 Teville Industrials | | Dominion Way Worthing BN14 8NW | West Sussex |
T: +44 (0)1903 215315 E: sales@pentonuk.co.uk | F: +44(0)1903 215415 |
www.pentonuk.co.uk
1. LOUDSPEAKER ENCLOSURE
2. REFERENCE AXIS 1
3. REFERENCE AXIS 2
4. HORIZONTAL PLANE 1
5. HORIZONTAL PLANE 2
6. REFERENCE PLANE 1
7. REFERENCE PLANE 2
MOULDED CABINET
LOUDSPEAKER BI-DIRECTIONAL
f
f
f
f
f
APC6BT/EN
f APC6BT/ENC
2
EN54-24
INSTALLATION INSTRUCTIONS
EN54-24:2008
Certificate No: 0359-CPR-0148 TYPE A
f APC6BT/ENC
* with capacitor
STEP 3
Terminate the speaker cabling into
the terminal block via suitable cable
glands. Select the correct tapping on
the transformer located on the
speaker front panel. Then fit the
front panel to the back box taking
note of the diagram right to ensure
correct fitting.
STEP 4
Once the speaker front panel has
been fitted to the back box
secure in place using the
supplied fixing screws as shown
in the diagram right. The speaker
installation is now complete.
ZCL0504-082 P
OCTOBER 2014
Circuit Diagram
1
2
4
3
5
6
7
Gland Hole Ø20X3
Drawing position
Rubber seal
Screw
Washer
A
BB’
A
COM.
100V
Thermal Fuse
*
3W
1.5W
0.75W
6W
STEP 1
Select a suitable position to mount the loudspeaker. Offer the speaker
to the wall or ceiling and mark through the mounting holes to position
the fixing points to be drilled. Use a spirit level to ensure that the
speaker will be level when fixed. Drill 4 fixing holes as shown in the
diagram. Ensure you use the fixing holes that sit inside the rubber seal.
The speaker can also be mounted to a standard single gang or BESA
type back box. Use suitable raw plugs to secure the fixings.
STEP 2
Before fixing the speaker ensure it is correctly orientated to take the
incoming speaker cable. The speaker can now be positioned over the
fixing holes made in the mounting surface at Step 1. Ensure that the
rubber "O" ring gasket is fitted as shown in Step 1 and then use
suitable fixings to hold the speaker securely to the surface.

Termékspecifikációk

Márka: Penton
Kategória: hangszóró
Modell: APC6BT/EN

Szüksége van segítségre?

Ha segítségre van szüksége Penton APC6BT/EN, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hangszóró Penton

Penton

Penton RCS4FT/EN Útmutató

24 Augusztus 2024
Penton

Penton APC6BT/EN Útmutató

24 Augusztus 2024
Penton

Penton RCS5FT/EN Útmutató

24 Augusztus 2024
Penton

Penton CELL10BT/EN Útmutató

24 Augusztus 2024
Penton

Penton RCS8FTCX/EN Útmutató

24 Augusztus 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró