Használati útmutató PCE Instruments PCE-FOT 10

PCE Instruments hőmérő PCE-FOT 10

Olvassa el alább 📖 a magyar nyelvű használati útmutatót PCE Instruments PCE-FOT 10 (9 oldal) a hőmérő kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/9

Food / Hygiene Thermometer PCE-FOT 10

User Manual

User manuals in various languages (français,

italiano, español, português, nederlands, türk, polski,

русский, 中文

中文

中文中文) can be found by using our

product search on: www.pce-instruments.com

Last change: 26 July 2018

v1.0

English

Contents

1 Safety notes ........................................................................................... 1

2 Technical specications 2 ......................................................................

3 Interpretation of the measured values ................................................ 2

4 Device description ................................................................................ 3

5 Measurement ......................................................................................... 4

6 Settings / conguration mode ............................................................. 4

7 Advanced alarm settings 5 .....................................................................

8 Calibration 5 .............................................................................................

9 . 6 Contact ................................................................................................

10 Disposal ................................................................................................. 6

1 Safety notes

Please read this manual carefully and completely before you use the device for the rst time. The

device may only be used by qualied personnel and repaired by PCE Instruments personnel.

Damage or injuries caused by non-observance of the manual are excluded from our liability and

not covered by our warranty.

• The device must only be used as described in this instruction manual. If used otherwise,

this can cause dangerous situations for the user and damage to the meter.

• The instrument may only be used if the environmental conditions (temperature, relative

humidity, …) are within the ranges stated in the technical specications. Do not expose

the device to extreme temperatures, direct sunlight, extreme humidity or moisture. The

device is intended for indoor use.

• Before the measurement, the device should have stabilis ambient temperatureed at ,

which is important when moving from cold to warm rooms and vice versa.

• Do not expose the device to shocks or strong vibrations.

• The case should only be opened by qualied PCE Instruments personnel.

• Before making a measurement, make sure the device is entirely closed.

• Never use the instrument when your hands are wet.

• You must not make any technical changes to the device.

• The appliance should be cleaned with a damp cloth after each use. Use only pH-neutral

cleaner, no abrasives or solvents.

• The device must only be used with accessories from PCE Instruments or equivalent.

• When the frying oil tester is not used for a longer period of time, remove the batteries.

• Do not store the meter together with any chemicals.

• Before each use, inspect the case for visible damage. If any damage is visible, do not

use the device.

• Wear your personal protective equipment during each measurement to avoid injury.

This also applies to other people near the measuring location as oil splashes can cause

serious injury to human skin and eyes.

• To avoid burns, never touch the sensor or the metal shaft directly after the

measurement as these parts can become very hot when they are immersed into hot

oil.

• Remove the oil quality meter from the oil when you leave the place.

• Do not use the instrument in explosive atmospheres. Also avoid proximity to explosive,

easily ammable or chemical substances when the sensor is hot.

• Only use the device in systems that are electrically tested on a regular basis. Never

connect the conductive metal parts of the meter with a source of voltage. Inspect the

system visually before each measurement. If there are any signs of damage, do not

carry out any measurements until the problem has been resolved.

• The measurement range as stated in the specications must not be exceeded under

any circumstances.

• Non-observance of the safety notes can cause damage to the device and injuries to

the user.

We do not assume liability for printing errors or any other mistakes in this manual.

We expressly point to our general guarantee terms which can be found in our general terms of

business.

If you have any questions please contact PCE Instruments. The contact details can be found at

the end of this manual.

Termékspecifikációk

Márka:	PCE Instruments
Kategória:	hőmérő
Modell:	PCE-FOT 10

Szüksége van segítségre?

Ha segítségre van szüksége PCE Instruments PCE-FOT 10, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók hőmérő PCE Instruments

PCE Instruments PCE-PTH 10 Útmutató

29 December 2024

PCE Instruments PCE-895 Útmutató

29 December 2024

PCE Instruments PCE-FOT 10 Útmutató

29 December 2024

PCE Instruments PCE-IR 1300 Útmutató

16 Október 2024

PCE Instruments PCE-IR 425 Útmutató

16 Október 2024

Útmutatók hőmérő

Legújabb útmutatók hőmérő

A&D Medical UT-201BLE-A Útmutató

6 Január 2025

Emos E6210 Útmutató

1 Január 2025

Testo 105 Útmutató

1 Január 2025

Testo 830-T1 Útmutató

1 Január 2025

TriStar PD-8877 Útmutató

30 December 2025

Neno Medic T02 Útmutató

29 December 2024

Etekcity Lasergrip 1080 Útmutató

29 December 2024

Techno Line IR 200 Útmutató

28 December 2024

Techno Line WS 1080 Útmutató

28 December 2024

Techno Line IR 380 Útmutató

28 December 2024