Használati útmutató Parasound Halo JC 2

Parasound Vevő Halo JC 2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Parasound Halo JC 2 (16 oldal) a Vevő kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/16
IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of dangerous voltage” inside the product that may constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance instructions in the literature accompanying the product.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
1. Read all the safety and operating instructions before operating this product.Read Instructions
2. Retain safety and operating instructions for future reference.Retain Instructions
3. Adhere to all warnings on the product and in the operating instructions.Heed Warnings
4. Follow all operating and use instructions.Follow Instructions
5. Cleaning Unplug this product from the wall outlet before cleaning. Use a damp cloth for cleaning.
Clean the outside of the product only.
6. Attachments Do not use attachments that are not recommended by the product manufacturer;
they may be hazardous.
7. Do not use this product near water.Water and Moisture
8. Accessories Do not place this product on an unstable cart or stand. The product may fall, causing
bodily injury and damage to the product. A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the product and cart to overturn.
9. Ventilation — Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of
the product and to protect it from overheating. These openings must not be blocked or covered. This product
should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
10. Power Sources Operate this product only from the type of power source indicated on the label.
If you are not sure of the type of power supply to your home, consult your dealer or local power
company. This product is equipped with a three-prong grounding plug. This plug will only fit into a
grounding power outlet. If you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the grounding plug.
11. Power Cord Protection Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them.
12. Lightning Unplug the unit from the wall outlet for added protection during a lightning storm
and when it is left unattended and unused for long periods of time. This will prevent damage to the
product due to lightning and power line surges.
13. Overloading — Do not overload wall outlets or extension cords. This can result in a fire or electric shock.
14. Inserting Objects into Unit — Never push objects of any kind into this product through any openings;
they may touch dangerous voltage points or short out parts that could result in fire or electric shock.
15. Servicing — Do not attempt to repair or service this product yourself. Opening or removing covers may
expose you to dangerous voltage and other hazards. Refer all servicing to qualified service personnel.
16. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions: If the power-supply cord or plug is damaged. a)
b) c) If liquid has been spilled into the product. If the product has been exposed to rain or water. d)
If the product does not operate normally by following the operating instructions. e) If the product has
been dropped or damaged in any way. f) If the product exhibits a distinct change in performance.
17. Replacement Parts When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer. Unauthorized substitutions may result in fire, electric
shock, and other hazards.
18.
Safety Check Upon completion of any service or repairs to this product, ask the service technician
to perform safety checks to determine that the product is in proper operating condition.
19. Mount the product to a wall or ceiling only as recommended.Wall or Ceiling Mounting
20. Heat The product should be situated away from heat sources such as radiators, heat registers,
stoves, and other products (including amplifiers) that produce heat.
www.parasound.com
3
Thank You for Choosing Parasound
Your new Parasound® Halo JC 2 preamplifier represents the pinnacle of analog audio technology.
The JC 2 was originally conceived by Parasound president, Richard Schram, as a companion for
the famed Halo JC 1 mono power amplifier. In the spirit of the JC 1, Parasound commissioned
John Curl and CTC builders to design a two channel preamplifier without compromise. It uses
the highest quality parts and achieves a higher level of sonic and measured performance than
any preamplifier we’ve made since Parasound was founded in 1981. We’re proud to offer you
this exceptional audio component, knowing that it will bring you many years of enjoyment
and dependability.
We appreciate your taking the time to read these instructions and thank you for selecting
Parasound. For updates and corrections to this manual, we invite you to check our web site,
www.parasound.com
Enjoy.
The Parasound Staff
Keeping Records for Future Reference
Record the serial number located on the back panel or bottom side of your JC 2 in the space
below. Also note your Parasound Dealers name and telephone number. Your purchase receipt/
bill of sale is required to determine if your JC 2 is eligible for Parasound warranty service. We
recommend that you make an extra copy of your original purchase receipt/bill of sale and store
it inside the JC 2s carton.
You Should Know
There is no Parasound warranty for this unit if it was not purchased from an Authorized
Parasound Dealer. Investigate warranty coverage statements made by an unauthorized dealer
very carefully, as you will need to depend entirely upon your dealer, and NOT upon Parasound.
Unauthorized dealers lack the capability to make repairs or arrange for repairs of Parasound
equipment. Authorized Parasound Dealers and detailed warranty information is available at
www.parasound.com or you can call 415-397-7100 between 8:30 am and 4:30 pm Pacific time.
A missing or altered serial number could indicate that this unit was re-sold by an unauthorized
dealer or is stolen merchandise. If this unit is missing its serial number or the serial number has
been altered, you should return it to your dealer immediately for a full refund.
INTRODUCTION
OWNERSHIP REFERENCE INFORMATION
Parasound JC 2 Preamplifier Serial #:
Parasound Dealer:
/ /Dealer Phone Number: Date of Purchase:
( ) -

Termékspecifikációk

Márka: Parasound
Kategória: Vevő
Modell: Halo JC 2

Szüksége van segítségre?

Ha segítségre van szüksége Parasound Halo JC 2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Vevő Parasound

Útmutatók Vevő

Legújabb útmutatók Vevő