Használati útmutató Ozito PXPHTK-2545

Ozito sövénynyíró PXPHTK-2545

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito PXPHTK-2545 (12 oldal) a sövénynyíró kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
CORDLESS POLE
HEDGE TRIMMER
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Cutting Speed: 1,400 SPM
Cutting Capacity: Ø16mm max.
Cutting Length: 410mm max.
Blade Length: 450mm
Extension Pole: 830mm
Length Min/Max.: 2.07/2.90mm
Weight: 3.50kg
PXPHTS-1845
STANDARD EQUIPMENT
Trimmer Head
ozito.com.au
Extension Tube
WARRANTY
0323
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: bearings, blades,
blade cover.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria 3175, Australia.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
Blade Cover
Rear Handle Tube
Shoulder Strap
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
The pole hedge trimmer can be used either with or without the
extension tube.
Fitting the Tubes
WARNING! ENSURE THE MACHINE IS SWITCHED OFF
AND BATTERY IS DISCONNECTED BEFORE PERFORMING
ANY OF THE FOLLOWING TASKS.
ACCESSORIES
1
9
2
3
4
14
6
7
8
1. Blade
2. Trimmer Head
3. Pivoting Head Button
4. Lock Nut
5. Extension Tube
6. Top Handle
7. Shoulder Strap Retainer
8. Sure Grip Handle
9. Rear Handle Release x 2
10. Safety Switch
11. Battery Seating
12. On/Off Trigger
13. Blade Cover
14. Shoulder Strap
CORDLESS POLE HEDGE TRIMMER
WARNING! WHEN HANDLING THE BLADE ASSEMBLY,
WEAR NON-SLIP, HEAVY-DUTY PROTECTIVE GLOVES. DO
NOT PLACE YOUR HAND OR FINGERS BETWEEN BLADES
OR IN ANY POSITION WHERE THEY COULD GET PINCHED
OR CUT. NEVER TOUCH BLADES OR SERVICE THE UNIT
WITH THE BATTERY INSTALLED.
BATTERY & CHARGER
This tool is compatible with all battery and
chargers from the Ozito PXC Range.
• Assembly without Extension Tube
1. Make sure the motor head and the rear handle are in the correct
orientation. Push the tube of the motor head into the tube of the rear
handle, aligning the Tab with the Recess as you do so. Push both
halves together until it will not go any futher.
RECESSTAB
Note: The two parts
can only be tted in
the correct orientation.
Do not force the parts
together.
2. To secure the two parts
together, slide the
lock nut to the hread
and screw tight. To
dismantle, proceed in
reverse order.
Note: The locking and unlocking directions
are indicated on the lock nut.
4
10
11 12
13
5
7
2. PREPARATION
WARNING! NEVER START THE POLE HEDGE TRIMMER
WHILE THE BLADE COVER IS FITTED.
• Assembly with Extension Tube
1. Push the tube of the motor head into the extension tube, aligning the
Tab with the Recess of the extension tube as you do so. Push both
halves together until it will not go any futher.
RECESSTAB
Note: The two parts
can only be tted in
the correct orientation.
Do not force the parts
together.
2. To secure the two parts
together, slide the lock
nut to the extension tube
thread and screw tight.
3. Make sure the motor head and the rear handle are in the correct
orientation. Push the tube of the rear handle onto the tube of the
extension tube, aligning the Tab with the Recess as you do so. Push
both halves together until it will not go any futher.
4. To secure the two parts together, screw tight with the lock nut.
WARNING! DO NOT OPERATE THE POLE HEDGE
TRIMMER WITH MORE THAN ONE EXTENSION TUBE
FITTED, THIS IS EXTREMELY DANGEROUS.
Adjusting the Rear Handle
Press and hold the two rear handle releases, one each side and turn the
handle 90 to the left or 90 to the right. Release to lock in position.
Pivoting the Trimmer Head
The head can be tilted to 7 different angles for ease of cutting in
different conditions.
1. Grip the motor housing of
the trimmer, press and hold
the pivoting head button.
WARNING! DO NOT HOLD THE BLADE IN AN ATTEMPT
TO ADJUST THE BLADE ANGLE. DOING SO MAY RESULT
IN POSSIBLE PERSONAL INJURY.
2. Tilt the head to any of
the 7 preset angles,
then release the
button to lock the
head in the selected
position.
The blade cover protects
the blade when not in
use. Simply slide it off
the blade before use.
Once nished operating,
place the cover back
over the blade.
Blade Cover

Termékspecifikációk

Márka: Ozito
Kategória: sövénynyíró
Modell: PXPHTK-2545

Szüksége van segítségre?

Ha segítségre van szüksége Ozito PXPHTK-2545, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók sövénynyíró Ozito

Ozito

Ozito PXCGSS-018 Útmutató

10 Október 2024
Ozito

Ozito PXCHTS-018 Útmutató

2 Október 2024
Ozito

Ozito PXPHTS-1845 Útmutató

30 Augusztus 2024
Ozito

Ozito PXPPK-2520 Útmutató

23 Augusztus 2024
Ozito

Ozito PXPHTK-2545 Útmutató

23 Augusztus 2024
Ozito

Ozito HTER-600U Útmutató

13 Augusztus 2024
Ozito

Ozito PXCHTS-018U Útmutató

12 Augusztus 2024
Ozito

Ozito PXCPHTS-018U Útmutató

10 Augusztus 2024
Ozito

Ozito PXCHTK-218U Útmutató

10 Augusztus 2024
Ozito

Ozito OHT-018 Útmutató

8 Augusztus 2024

Útmutatók sövénynyíró

Legújabb útmutatók sövénynyíró

Alpina

Alpina AHT 500 E Útmutató

3 Április 2025
Kingcraft

Kingcraft KCH 550 Útmutató

3 Április 2025
ATIKA

ATIKA HB72 Útmutató

3 Április 2025
Anova

Anova CG2360 Útmutató

3 Április 2025
Einhell

Einhell HEC 410 Útmutató

30 Március 2025
Makita

Makita DUM168 Útmutató

29 Március 2025
Makita

Makita BUM166 Útmutató

29 Március 2025
Husqvarna

Husqvarna 325HD60 X-series Útmutató

26 Március 2025
Gardena

Gardena EasyCut 50-Li - 8873 Útmutató

24 Március 2025
Gardena

Gardena ErgoCut 48-Li - 8878 Útmutató

23 Március 2025