Használati útmutató Ozito PXCPHTA-400

Ozito sövénynyíró PXCPHTA-400

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito PXCPHTA-400 (8 oldal) a sövénynyíró kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
CORDLESS POLE
HEDGE TRIMMER HEAD
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V
Cutting Length: 400mm
Max. Cutting Capacity: 12mm
No Load Speed: 1,700/min
Weight: 1.57kg
PXCPHTA-400
WHAT’S IN THE BOX
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
ozito.com.au
0617
WARNING
The following actions will result in the warranty being
void.
If the tool has been operated on a supply voltage other
than that specied on the tool.
If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example blades, blade
cover.
Blade Cover
Hedge Trimmer Head
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
POLE HEDGE TRIMMER HEAD
1. Trimmer Head
2. Blade
1 2
CAUTION: ENSURE THE TOOL IS OFF & THE BATTERY
REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Note: The Lock Button will “CLICK” back to the left (original position) when
the trimmer head is correctly secured in place.
CAUTION: THE BLADE HAS SHARP EDGES. FOR YOUR OWN
SAFETY, PLEASE WEAR WORK GLOVES.
Fitting Trimmer Head
1. Align the Trimmer head
and the motor head so the
arrows on both coincide.
2. (a) Press the trimmer head
against the motor head.
This will cause the lock
button to be pushed to the
right.
(b) Turn the trimmer head
clockwise. The trimmer
head will lock onto the
motor head and is then
secured in place.
Lock Button
a
b
Removing Trimmer Head
Motor Head
a
b
1. (a) Pull and hold the Lock
Button to the right.
(b) Turn the Trimmer
Head anti-clockwise so
the arrows on the Motor
Head and the Trimmer
Head coincide, allowing
the Trimmer Head to be
removed.
2. PREPARATION
Adjusting the Rear Handle
Adjusting the telescope length
1. To unlock the telescopic tube lock, twist it in a
clockwise direction while pointing the trimmer
blade away from the user.
2. Pull out the telescopic tubes to suit the required working height.
1. Press the two pivoting
handle releases, one
each side and adjust
the angle of the handle
up or down to any of 4
positions.
Note: The locking and unlocking
directions are indicated on
the locking collar.
3. To lock in the desired position, twist the telescopic tube lock in a counter-
clockwise direction.
Adjusting the Additional Handle
a
b
a
b
1. (a) Open the handle lever and
set the required (b) tilt of the
additional handle, close to lock
into position.
2. (a) Open the mounting bracket
lever and (b) slide the additional
handle into the required position,
close to lock into position.
2. Wear the shoulder strap
so that it lies over the left
shoulder.
1. Fasten to the shoulder strap
holder on the main tube.
Attaching the Shoulder Strap
Pivoting the Trimmer Head
1. Press the two pivoting
head releases, one each
side and adjust the angle
of the trimmer head
up or down to any of 7
positions.

Termékspecifikációk

Márka: Ozito
Kategória: sövénynyíró
Modell: PXCPHTA-400

Szüksége van segítségre?

Ha segítségre van szüksége Ozito PXCPHTA-400, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók sövénynyíró Ozito

Ozito

Ozito PXCGSS-018 Útmutató

10 Október 2024
Ozito

Ozito PXCHTS-018 Útmutató

2 Október 2024
Ozito

Ozito PXPHTS-1845 Útmutató

30 Augusztus 2024
Ozito

Ozito PXPPK-2520 Útmutató

23 Augusztus 2024
Ozito

Ozito PXPHTK-2545 Útmutató

23 Augusztus 2024
Ozito

Ozito HTER-600U Útmutató

13 Augusztus 2024
Ozito

Ozito PXCHTS-018U Útmutató

12 Augusztus 2024
Ozito

Ozito PXCPHTS-018U Útmutató

10 Augusztus 2024
Ozito

Ozito PXCHTK-218U Útmutató

10 Augusztus 2024
Ozito

Ozito OHT-018 Útmutató

8 Augusztus 2024

Útmutatók sövénynyíró

Legújabb útmutatók sövénynyíró