Használati útmutató Ozito HDR-7113

Ozito Csavaros gép HDR-7113

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito HDR-7113 (6 oldal) a Csavaros gép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/6
HAMMER
DRILL
710W
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 230 - 240V ~50Hz
Motor: 710W
Chuck Size: 13mm (½”) Keyless
No Load Speed: 0 - 2,900/min
Impact Rate: 0 - 46,400bpm
Drilling Capacity: 25mm (Timber)
13mm (Masonry)
10mm (Metal)
Weight: 1.95kg
HDR-7113
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
Hammer Drill
Side Handle & Depth Rod
0721
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
1. Depth Rod
2. Keyless Chuck
3. Chuck Collar
4. Mode Selector
5. Forward/Reverse Button
6. Lock-On Button
7. Power Cord
8. Variable Speed Trigger
9. Speed Selection Dial
10. 360° Side Handle
HAMMER DRILL
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
2 3 41 5 6
8 710
9
Attaching The Side Handle
The side handle provides additional comfort, control, and guidance
for the hammer drill.
1. Loosen the side handle by turning it
clockwise.
2. Slide the handle onto the
collar of the hammer drill.
Note: There is an indexing tab
on the right side of the drill.
Ensure that the indexing tab is
properly seated in one of the
slots in the side handle collar.
3. Adjust the handle so that it’s in a
comfortable working position, then
tighten it into place by turning the side
handle anti-clockwise.
Installing The Depth Rod
The depth rod helps to drill to a pre-determined depth.
1. Loosen the side handle slightly
by rotating it clockwise.
2. Adjust the depth rod so the bit
extends beyond the end of the
rod to the required drilling depth.
Note: The depth rod has grooves in
10mm increments as a guide.
3. Tighten the side handle to lock the
depth rod into place.
4. When the tip of the depth rod touches
the work surface you have drilled to the
required depth.
a.
b.
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
2. CONTROLS
OPERATION
Mode Selection
1. Slide the mode selector to
the left of the tool to have it
in ‘hammer drill’ mode.
2. Slide the selector to the right
for normal drilling mode.
Speed Selection
The speed selector dial limits the speed range of the variable
speed trigger.
1. Rotate the speed selection
dial clockwise for faster
speeds.
2. Rotate the speed selection dial anti-
clockwise for lower speeds.
Drilling Direction
1. Push the forward/reverse button from the right side of the tool
to put it in forward mode.
2. Push the button on the left of
the tool for reverse mode.
Note: Drill speed is reduced
when in reverse mode.
Installing Drill Bits
1. Slide the chuck collar backwards
towards the tool to unlock the chuck.
2. Rotate the chuck anti-
clockwise to widen the jaws.
3. Insert the drill bit, making
sure it is centred in the jaws.
4. Rotate the chuck clockwise to tighten
the jaws around the drill bit.
5. Lock the chuck collar by
sliding it forwards.
WARNING! ENSURE THE DRILL BIT IS SECURELY
ATTACHED AND SPINS CONCENTRICALLY BEFORE
DRILLING.
a.
b.
DRILL
HAMMER
DRILL
FASTER
SLOWER
WARNING! ENSURE THE DRILL BIT HAS COME TO A
COMPLETE STOP BEFORE CHANGING MODES.

Termékspecifikációk

Márka: Ozito
Kategória: Csavaros gép
Modell: HDR-7113

Szüksége van segítségre?

Ha segítségre van szüksége Ozito HDR-7113, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Csavaros gép Ozito

Ozito

Ozito SDA-1100U Útmutató

12 Augusztus 2024
Ozito

Ozito SDU-5100U Útmutató

5 Augusztus 2024
Ozito

Ozito SDL-5000U Útmutató

4 Augusztus 2024
Ozito

Ozito OSDK-536 Útmutató

31 Július 2024
Ozito

Ozito HDR-7113 Útmutató

3 Július 2024

Útmutatók Csavaros gép

Legújabb útmutatók Csavaros gép

Metabo

Metabo SE 2800 Útmutató

13 Január 2025
RYOBI

RYOBI One+ R18IW3 Útmutató

12 Január 2025
Hazet

Hazet 9012EL-SPC Útmutató

12 Január 2025
MSW

MSW -ACW700 Útmutató

11 Január 2025
RYOBI

RYOBI PCL250 Útmutató

5 Január 2025
RYOBI

RYOBI PCL212 Útmutató

5 Január 2025
Hazet

Hazet 9022 P-2 Útmutató

31 December 2025
Milwaukee

Milwaukee M18 BDD Útmutató

30 December 2025
Milwaukee

Milwaukee M12 BDD Útmutató

30 December 2025
Netter Vibration

Netter Vibration PKL 740 Útmutató

29 December 2024