Használati útmutató Ozito AGM-5005U

Ozito csiszológép AGM-5005U

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito AGM-5005U (3 oldal) a csiszológép kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/3
size 445 x 210 mm
Danger! - Read the operating instructions to re-
duce the risk of inquiry
Caution! Wear ear-mus. The impact of noise
can cause damage to hearing.
Caution! Wear a breathing mask. Dust which
is injurious to health can be generated when
working on wood and other materials. Never use
the device to work on any materials containing
asbestos!
Caution! Wear safety goggles. Sparks gene-
rated during working or splinters, chips and dust
emitted by the device can cause loss of sight.
This safety guard is designed for sanding/
grinding.
This safety guard is designed for cutting and
grinding/sanding.
AGM-5005U
GB Additonal operating & safety instructions Angle Grinder
Yang/Product-ManagementWeichselgartner/General-Manager
explains the following conformity according to EU directives and norms for
the following product
Angle Grinder AGM-5005U (Ozito)
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X 2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X 2011/65/EU
X 2006/42/EC
Annex IV
Noti ed Body:
Noti ed Body No.:
Reg. No.:
2000/14/EC_2005/88/EC
Annex V
Annex VI
Noise: measured LWA = dB (A); guaranteed LWA = dB (A)
P = KW; L/Ø = cm
Noti ed Body:
2004/26/EC
Emission No.:
Standard references: EN 60745-1; EN 60745-2-3; EN 55014-1;
EN 55014-2; EN 61000-3-2; EN 61000-3-3
Landau/Isar, den 05.07.2016
First CE: 16 Archive-File/Record: NAPR014358
Art.-No.: 44.722.64 I.-No.: 11016 Documents registrar: Robert Gehard
Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
Declaration of conrmity
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
Service information
We have competent service partners in all countries named on the guarantee certicate whose contact
details can also be found on the guarantee certicate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes
Consumables* Cutting wheels, grinding wheels
Missing parts
* Not necessarily included in the scope of delivery!
In the eect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Plea-
se ensure that you provide a precise description of the problem and answer the following questions in all
cases:
• Did the equipment work at all or was it defective from the beginning?
• Did you notice anything (symptom or defect) prior to the failure?
• What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
size 445 x 210 mm
Items supplied
Please check that the article is complete as
specied in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
• Open the packaging and take out the equip-
ment with care.
• Remove the packaging material and any
packaging and/or transportation braces
(if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for
transport damage.
• If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suocating!
Proper use
The angle grinder is designed for grinding metal
and stone when using the appropriate grinding
wheel and guard.
Warning! To cut metal and stone the grinder/san-
der may only be used when the guard (available
as an accessory) is mounted.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user/operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Technical data
Mains voltage: 230-240 V ~ 50 Hz ........................
Power input: 1010 W ............................................
Idling speed: 12,000/min.......................................
Max. wheel diameter: 125 mm .............................
Grinding wheel: 125 x 22.2 x 6 mm ......................
Cutting wheel: 125 x 22.2 x 3 mm ........................
Mounting spindle thread: M 14 .............................
Protection class: II / ........................................... &
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
LpA sound pressure level ................... 88.97 dB(A)
KpA uncertainty ............................................. 3 dB
LWA
sound power level ..................... 99.97 dB(A)
KWA uncertainty ............................................. 3 dB
Wear ear-mus.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Surface sanding/grinding:
Vibration emission value ahAG = 14.08 m/s2
K uncertainty = 1.5 m/s2
The specied vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specied value
in exceptional circumstances.
The specied vibration value can be used to
compare the equipment with other electric power
tools.
The specied vibration value can be used for initi-
al assessment of a harmful eect.
Keep the noise emissions and vibrations to a
minimum.
• Only use appliances which are in perfect wor-
king order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever
necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in ac-
cordance with instructions, certain residual
risks cannot be rules out. The following ha-
zards may arise in connection with the equip-
ment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protecti-
on is used.
3. Health damage caused by hand-arm vibra-
tions if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to
the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.

Termékspecifikációk

Márka: Ozito
Kategória: csiszológép
Modell: AGM-5005U

Szüksége van segítségre?

Ha segítségre van szüksége Ozito AGM-5005U, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók csiszológép Ozito

Ozito

Ozito AGM-5005U Útmutató

15 Augusztus 2024
Ozito

Ozito AGS-4050U Útmutató

13 Augusztus 2024
Ozito

Ozito AGL-9100U Útmutató

13 Augusztus 2024
Ozito

Ozito OZMFS65WAU Útmutató

12 Augusztus 2024
Ozito

Ozito AGB-2200U Útmutató

12 Augusztus 2024
Ozito

Ozito PXAGK-300 Útmutató

11 Július 2024
Ozito

Ozito PX5PAK-005 Útmutató

9 Július 2024
Ozito

Ozito PXBAGS-125 Útmutató

5 Július 2024
Ozito

Ozito BSV-9000 Útmutató

4 Június 2024
Ozito

Ozito DSR-3000 Útmutató

4 Június 2024

Útmutatók csiszológép

Legújabb útmutatók csiszológép

Einhell

Einhell BT-MG 160 KIT Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-WS 600 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-WS 2000 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-WS 750 Set Útmutató

30 Március 2025
NEO Tools

NEO Tools 14-014 Útmutató

28 Március 2025
Makita

Makita 9500D Útmutató

28 Március 2025
Makita

Makita GA9020SF Útmutató

28 Március 2025
Einhell

Einhell TC-WS 125 Útmutató

25 Március 2025
Makita

Makita 9528NB Útmutató

19 Március 2025
Parkside

Parkside PEXS 270 A1 Útmutató

13 Január 2025