Használati útmutató OWC Thunderblade V4

OWC külső merevlemez Thunderblade V4

Olvassa el alább 📖 a magyar nyelvű használati útmutatót OWC Thunderblade V4 (12 oldal) a külső merevlemez kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
T H U N D E R B L A D E V 4
User Guide
Introduction 1 ............................................................................
1.1 Minimum System Requirements
1.2 Package Contents
1.3 Getting Started
1.4 About This Manual
1.5 Front View
1.6 Rear View
Mac & PC Setup 3 .....................................................................
2.1 Mac Formatting & SoftRAID Information
2.2 PC Formatting Process
Support Resources ............................................................... 10
3.1 Troubleshooting
3.2 About Data Backup
3.3 Contacting Technical Support
CONTENTS
OWC ThunderBlade V4 Table of Contents
OWC ThunderBlade V4 Introduction
1
1.1 Minimum System Requirements
Mac: host with Thunderbolt 3 port running macOS 10.13 or later
PC: host with Thunderbolt 3 port running Windows 10 or later
1.2 Package Contents
OWC ThunderBlade V4
0.5m Thunderbolt 3 cable
Power supply and cable
1.3 Getting Started
To use the ThunderBlade V4, connect it to your computer via the included
Thunderbolt 3 cable. Device drivers are not required, however use of
SoftRAID XT (macOS only at the time of this writing) requires the SoftRAID
driver and application.
The LED indicator on the front of the device (see Section 1.5) will glow blue
when the device is receiving power and is connected to an active host.
The LED will glow white when the device is connected to a host that is in
Sleep or hibernation mode, or when it has power but is not connected to a
host. This LED is also connected to a light sensor on the back of the device;
this enables the LED brightness to adjust automatically based on ambient
lighting conditions.
The LED has four segments, one for each installed M.2 SSD. When
one or more of the SSDs are accessed for read/write operations, the
corresponding segments will blink blue.
While it is possible to connect a DisplayPort 1.2 display to the spare
Thunderbolt 3 port on the device by using the appropriate cable or adapter,
HDMI and other types of displays require an with a active display adapter
USB-C host connection.
1.4 About This Manual
The images and descriptions may vary slightly between this manual and the unit
shipped. Functions and features may change depending on the rmware version.
Screenshot images may vary slightly from the installed operating system. The latest
product details and warranty information can be found on the product web page.
OWCs Limited Warranty is not transferable and subject to limitations.
INTRODUCTION

Termékspecifikációk

Márka: OWC
Kategória: külső merevlemez
Modell: Thunderblade V4

Szüksége van segítségre?

Ha segítségre van szüksége OWC Thunderblade V4, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók külső merevlemez OWC

Útmutatók külső merevlemez

Legújabb útmutatók külső merevlemez