Használati útmutató Oricom TPS10-6I

Oricom rádió TPS10-6I

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Oricom TPS10-6I (3 oldal) a rádió kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/3
TPS10-4I - With 4 Sensors
TPS10-6I - With 6 Sensors
Solar Powered Tyre Pressure
Monitoring System
TPMS
User Guide
Includes
1.Remove the original valve from vehicle
2.
In s stall sen or in he corre ponding t s tyre c gac ordin
to the position markings on the sensor
Sensor installation
3.
Inflate the tyre
5.
Perform a dynamic balance test
6.
Adjust counterweight using weight bars as
needed
4.
Screw the nut and valve cap
Psi
Psi Psi Psi
Product verv O iew
Select button
Solar panel
Micro USB input
SET button
Ventilation holes
Warning indicator
Display battery indicator
Charging status
Pressure data
Pressure unit
Temperature unit
Axles of trailer
Temperature data
Tow vehicle interface Trailer interface Spare interface
Psi
Display ON/OFF
Display installation
Installation position
Place the anti-slip mat under the
display
Press any button for 3 seconds to turn on the display.
Press “ button for 3 seconds to turn off the display.
USB charging connection
Micro USB Plug USB charger
(Not included)
Sensor position
Psi Psi Psi
F.L. F.R.
R.L. A3R.R.
A1 A2 S1 S2
A4
Note: Typical sensor position as per
diagram to the left.
F.R. R.R.
R.L.F.L.
A2 A4
A3
S2
S1
A1
>25km / h
Installation is complete when all tyre
data has been received and is showing
on the display.
tyre
Only compatible for use with alloy wheels.
X4 or 6
C
M
Y
CM
MY
CY
CMY
K
OR022074 - TPS10 Internal User Guide_output_11-14-22.pdf 1 2022/11/14 15:15:11
beeps
Sensor programming(All sensors in package are preprogrammed)
2 s sit b g . S t telec he de ired tyre po ion y followin
these steps:
a . Hold bu on and presstt ” button once to
selec he int t terface. (Interface sequence: tow
vehicle → Axle A of Trailer → Axle B of Trailer→
Spare tyre)
b . Then press “ bu ontt to selec he desiredt t tyre.
6. After the sensors are programmed, press
bu on ortt f 4 seconds to exi t the programming mode.
5. Press ” button to select the next sensor
position.
When programming a new sensor or a missing sensor to the display.
programming mode.
Psi
3. Deflate the corresponding tyre slightly.
Psi
4. The corresponding tyre data will be shown on
the display, then press ” button once to save
the data.
Psi
Psi
Alerts
High empera ur t t e
Troubleshooting
Additional Warnings
Express Warranty (Australia)
Specifications Disclaimer
Driver distraction warning
2.3~3.3V
6 86
2.5mA
temperature:
High pressure value: 2.6~7.9Bar/37~115PSI
High temperature value:
Low pressure value: 0.9~3.9Bar/13~55PSI
High temperature value:
Adjustable Alarm Value:
High pressure value: 3.3Bar/47PSI
Low pressure value: 1.7Bar/24PSI
Default Value:
Temperature:
Pressure: ±
0.1Bar
0.2PSI
Precison:
Note: It is recommended that the tyre pressure
alarm value s are se 25%t to ± of the c dre ommende
manufacturer tyre pressure values.
1. (TPMS) is designed for vehicles with tyre pressure up to 6.0
Bar/ 86PSI.
2. All sensors in this unit have been pre-set individually for each
tyre in the factory.
3. Whenever the location of tyre changed, the sensors must be
changed to the corresponding tyre.
4. The display will turn off after the vehicle stops.
5. The sensor battery life depends on the driving mileage.
6. Approval marks and numbers should not be removed from the
product.
7. If the solar energy display is placed in temperature of higher
than 80ºC(or 176ºF), the capacity of the built-in battery might
be damaged.
8. s If the di pla noy longer holds a charge hen t it is ime t to replace
the display unit a ss the di play uni ba eryt tt is non-u er replaceables .
9. Discharge and charge fully every 6 mon hst to fe.preserve ba erytt li
10. Store between -40ºC to +80ºC (-40ºF to +176ºF). Charge
between -10ºC to +65ºC (+14ºF to +149ºF).
11. Do not expose the battery to high temperature.
12. Do no allowt the ba ery tt to ge we ore or uset t, st in high humidi ty
conditions as this will discharge the battery.
13. Do not disassemble or tamper with battery.
This Express Warranty is provided by Oricom
International Pty Ltd ABN 46 086 116 369, Unit 1, 4
Sovereign Place, South Windsor NSW 2756, herein after
referred to as “Oricom”.
Oricom warrants that the product is free from defects in
materials or workmanship during the Express Warranty
Period. This Express Warranty does not extend to any
product from which the serial number has been removed
or was purchased outside of Australia.
The benefits of this Express Warranty are in addition to
other rights and remedies you may have under the
Australian Consumer Law. Our goods come with
guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or
refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does
not amount to a major failure. In the event of a minor
failure, Oricom reserves the right to choose to repair or
replace the product.
The Express Warranty Period will be a period of 12
months beginning on the date of purchase of the product
evidenced by your dated sales receipt. You are required
to provide proof of purchase as a condition of receiving
Express Warranty services.
You are entitled to a replacement product or repair of
the product at our discretion according to the terms and
conditions of this document if your product is found to
be faulty within the Express Warranty Period. This
Express Warranty extends to the original purchaser only
and is not transferable.
Products distributed by Oricom are manufactured using
new materials or new and used materials equivalent to
new in performance and reliability. Spare parts may be
new or equivalent to new. Spare parts are warranted to
be free from defects in material or workmanship for thirty
(30) days or for the remainder of the Express Warranty
Period of the Oricom branded product in which they are
installed, whichever is longer. During the Express
Warranty Period, Oricom will where possible repair and
if not replace the faulty product or part thereof. All
component parts removed under this Express Warranty
become the property of Oricom. In the unlikely event that
your Oricom product has a recurring failure, Oricom may
always, subject to the Competition and Consumer Act
2010, at its discretion, elect to provide you with a
replacement product of its choosing that is at least
equivalent to your product in performance.
No change to the conditions of this Express Warranty is
valid unless it is made in writing and signed by an
authorised representative of Oricom.
Oricom will not be liable under this Express Warranty,
and to the extent permitted by law will not be liable for
any defect, loss, damage or injury arising out of or in
connection with a:
1. Failure by you to adhere to the warnings and follow
the instructions set out in this user guide for the proper
installation and use of the product;
2. Willful misconduct or deliberate misuse by you of the
product;
3. Any external cause beyond our control, including but
not limited to power failure, lightning or over voltage; or
4. Modification to the product or services carried out on
the product by anyone other than Oricom or Oricom’s
authorised service provider.
How to make a claim under your Express Warranty
in Australia
Oricom has a simple warranty process for you to follow:
• Please call or email our Customer Support Team, 02
4574 8888 or support@oricom.com.au.
• A Customer Support Team member will verify after
troubleshooting with you if your product qualifies under
warranty. If so, they will give you a Product Return
Authorisation number.
• We will then email a Return Authorisation form and a
Repair Notice (if necessary), together with instructions
on how to return the product for warranty service.
Please note that if a Customer Support Team member
advises that your product does not qualify for return, this
warranty does not apply to your product. Products that
are authorised to be returned to Oricom in Australia must
include all of the following:
• A completed Return Authorisation form
• A copy of your Proof of Purchase (please keep your
original copy)
• The faulty product, including all accessories.
Send the approved returns to:
Oricom International Pty Ltd
Locked Bag 658
South Windsor NSW 2756 Australia
Please note that this Express Warranty excludes
expenses incurred by you in returning any faulty product
to us. You must arrange and pay any expenses incurred
(including postage, delivery, freight, transportation or
insurance of the product) to return the faulty product to
us, however, we will arrange delivery of the repaired or
replaced faulty product to you.
Important Information - Repair Notice
Please be aware that the repair of your products may
result in the loss of any user-generated data (such as
stored telephone numbers, text messages and contact
information). Please ensure that you have made a copy
of any data saved on your product before sending for
repair. Please also be aware that products presented for
repair may be replaced by refurbished products or parts
of the same type rather than being repaired.
ORICOM CUSTOMER SUPPORT
Oricom have a trained and dedicated team of Customer
Support Representatives, each with the knowledge and
resources to assist in answering your questions quickly
and efficiently.
Oricom Support - Australia
For all product enquiries, troubleshooting or to discuss
the range of Oricom products, feel free to contact Oricom
or visit our website for answers to frequently asked
questions.
02 4574 8888
Monday - Friday 8am – 6pm AEST
Email: support@oricom.com.au
www.oricom.com.au
T pem erat reu unit :setting
In high tempera ure value se ingt tt page. Press
and hold . ss bu ontt and pre bu ontt
on sele he in er ace (car or railer)ce o t ct t t f t
t o e hen press t the bu ontt s t the high
t t o t face.empera ure value f the curren int er
pre bu onss tt once to ten er the ne xt setting.
Psi
High pressu re value setting:
In high pressure value setting page. Press
and hold . bu ontt and press bu ontt
on sele he in er (car or railer)ce o t ct t t face t
t o hen press t the bu ontt set the high
pressure alue he urren in er v of t c t t face.
press tbu ontt once o ten er the next setting.
Psi
In temperature unit setting , press “
button to t select the tempera ure unit, then
press button once to save and move
to the next setting;
In low pressure value setting page. Press and
hold . ss ce bu ontt and pre bu ontt on
to t face r) select the in er (car or traile then
press he bu on he low es ure t tt t so et t pr s
value he urren in er ace of t c t t f .
Low pressu re value setting:
High temperat reu value setting:
Psi
Ti l me interva setting of :each interface
In t time in erval se on tting page pres, s butt
to se t v o ch t f n t the time in er al f ea in er ace, the
press bu ontt once to ten er he ne ing t xt sett .
Time intervals: 5 / 10 / 20 / 30 / 60 / OFF
Default: 5 seconds
Tyre data del :etion
Psi
In tyre data deletion page, press button
to select the programmed tyre da ta to be dele edt .
Then hold button until the display shows
" the tyre data has been deleted.--",
Psi
P o he ress button t select t programmed
A o , t n xles f the Trailer or S Tpare yre he
press button for 3 seconds to disable or
to e enabl .
Di e/enasabl ble atra eril nd spare tyres :
P ceress button on to t en er the nex ingt sett .
press bu ontt ce o on t enter the next se ingtt .
Trailer axles setting:
Spare Tyre settings (individual):
Enabled status(default)
Enabled status(default)
Disabled status
Disabled status
Driver should always operate a vehicle in a safe manner.
Minimising the amount of time spent viewing the display will
prevent distraction.
When installing on the dash, ensure the device is placed securely
to ensure that it does not obstruct the driver’s view of the road.
Do not place in any way that may hinder the vehicles operating
controls.
Do not place in a location that will obstruct airbags.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception,
which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
1. After the installation, there is no tyre data on the display
* The sensors were not programmed to the display, please
reprogram the sensors
* The display should show the real time tyre data automatically when
the speed is over 25km/h
2. There is no tyre data on the display
* The sensors are not programmed to the display, please reprogram
it
* There is a problem with the sensor
3. The system has a problem when there is "--" appears
intermittently
* The signal that is transmitted is a RF signal and is much like a
cellphone signal. The FCC requires to allow all other RF signals to
interfere with the system signals and this can cause the monitor to
occasionally miss a transmission from the sensors. If this persists
then you could have a damaged sensor or the batteries could be
weak.
Psi
Fun ion ingct sett s
Press bu ontt for 4 seconds to exi he se ingt t tt mode
t wo beep wills sound.
The se tting sequence as below:
Press bu ontt for 4 seconds to enter he t se tting mode,
a beep will ound s .
En /Eter xit the setting odm e
Di pla lows y ba ertt y
Psi
Psi
Psi
Psi
Psi
Psi
S eensor failur
Psi
Pressure unit
T tempera ure uni t T ime in er alt v of
each in ter acf e
High pressure
value
Tyre data
deletion
Low pressure
value
High tempera urt e
value
Disable/enable raile t r
and spare tyres
a erft
to save and mo ve to the ne ingxt sett .
Only compatible for use with alloy wheels.
C
M
Y
CM
MY
CY
CMY
K
OR022074 - TPS10 Internal User Guide_output_11-14-22.pdf 2 2022/11/14 15:15:11

Termékspecifikációk

Márka: Oricom
Kategória: rádió
Modell: TPS10-6I

Szüksége van segítségre?

Ha segítségre van szüksége Oricom TPS10-6I, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók rádió Oricom

Oricom

Oricom UHF390R Útmutató

10 December 2024
Oricom

Oricom UHF3954P Útmutató

10 December 2024
Oricom

Oricom UHF395P Útmutató

10 December 2024
Oricom

Oricom WRC001 Útmutató

19 Augusztus 2024
Oricom

Oricom ANU200 Útmutató

17 Augusztus 2024
Oricom

Oricom PMR1310 Útmutató

14 Augusztus 2024
Oricom

Oricom TPS10-6I Útmutató

14 Augusztus 2024
Oricom

Oricom UHF025 Útmutató

14 Augusztus 2024
Oricom

Oricom ANC670 Útmutató

13 Augusztus 2024
Oricom

Oricom ANU100 Útmutató

13 Augusztus 2024

Útmutatók rádió

Legújabb útmutatók rádió