Használati útmutató Oregon Scientific SL928D
Oregon Scientific
Stopwatch
SL928D
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Oregon Scientific SL928D (23 oldal) a Stopwatch kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/23
1
GB
100 LAP STOPWATCH
MODEL NO.: SL928D
User Manual
INTRODUCTION
Congratulations on your purchasing the SL928D 100 Lap Stopwatch. A reliable
timepiece for an active lifestyle, the SL928D is equipped with additional functions
such as a multi-step pacer, count-down and count-up timer, and EL back light.
MAIN FEATURES
Refer to (FIG. 1).
A. [ LAP/RESET ] BUTTON
Registers a lap or resets, reset stop watch and timer, changes or decreases a
value
B. [ ] BUTTON
Operates the back light
C. [ MODE ] BUTTON
Changes an operating mode or enters a setting procedure
D. [ START/STOP ] BUTTON
Starts or stops the stopwatch, timer or pacer, changes or increases a value
E. [ RECALL ] INDICATOR
Indicates the RECALL function is active
F. [ LAP ] INDICATOR
Indicates the number of laps
G. [ CHRONO ] INDICATOR
Indicates the CHRONO mode
H. [ ] INDICATOR
Indicates the daily alarm is active
2
GB
I. [ ] INDICATOR
Indicates the accumulated time
J. [ SEGMENT ] INDICATOR
Indicates the number of segments in a counting
K. [ ] INDICATOR
Indicates the AUTO LIGHT function is active
L. [ ] INDICATOR
Indicates the lap time
M. [ PACER ] INDICATOR
Indicates the PACER mode
N. [ TIMER ] INDICATOR
Indicates the TIMER mode
O. [ ] INDICATOR
Indicates the split time
P. [ FREE ] INDICATOR
Indicates the effective memory left for laps
Q. SAFETY CORD
Uses to secure the unit on hand or hanging the unit around the neck
DISPLAY MODES
Refer to (FIG. 2).
BACK LIGHT AND AUTO LIGHT
Refer to (FIG. 3).
Press [ ] to turn on the back light for five seconds. To activate the AUTO LIGHT
function, press and hold [ ] for two seconds. Press and hold [ ] again to
deactivate it. When the function is active, pressing any button will turn on the
back light for five seconds.
3
GB
TIME AND CALENDAR DISPLAY
Refer to (FIG. 4).
HOW TO SET THE CALENDAR CLOCK
Refer to (FIG. 5).
Note:
a. Clock in either 24-hour or 12-hour (with “a” and “p” indication) format.
b. Calendar year can be set between 2000 to 2099. The unit will automatically
recognize the day of the week.
c. Minute digit will be auto-advanced by one digit if second is reset after 30 sec.
HOW TO USE THE CHRONOGRAPH
Refer to (FIG. 6).
1. Press [ MODE ] to display the CHRONO mode.
2. To register a segment, press [LAP/RESET].
3. Press [ START ] to start counting. The stopwatch can count up to 23 hours, 59
minutes and 59.99 seconds before starting from zeros again.
4. Press [ STOP ] to stop counting. To resume, press [START]. A new lap count
will start.
5. Or press [ LAP/RESET ]. The last lap number will appear and the display will
freeze for five seconds. The [ CHRONO ] indicator will flash indicating the
stopwatch is still running in the background.
6. Press [ STOP ] to stop counting.
7. Repeat the last three steps to register other laps. The stopwatch can register up
to 100 laps.
8. Press [ LAP/RESET ] after stopping to clear the display and register another
segment.
Note:
a. The stopwatch can register up to 30 segments.
b. 30 segments share with total 100 lap memories.
Termékspecifikációk
| Márka: | Oregon Scientific |
| Kategória: | Stopwatch |
| Modell: | SL928D |
Szüksége van segítségre?
Ha segítségre van szüksége Oregon Scientific SL928D, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Stopwatch Oregon Scientific
6 Augusztus 2024
4 Augusztus 2024
Útmutatók Stopwatch
Legújabb útmutatók Stopwatch
30 Szeptember 2024
30 Szeptember 2024
18 Szeptember 2024
17 Szeptember 2024
8 Augusztus 2024
3 Augusztus 2024
31 Július 2024
3 Július 2024