Használati útmutató Optima Scale OP-412

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Optima Scale OP-412 (30 oldal) a mérleg kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/30
ptimascale.co
OP-900 SERIES INDICATOR
USER’S MANUAL
(OP-900A, OP-900B Series) 9.9.19
TABLE OF CONTENTS
Safety Precautions 1
Preparations and Set Up 1
Features 2
Specications 3
Power Supply 4
Displays 5
Display and Key Descriptions 6
Operating Instructions 7-9
Calibration 10
Indicator Parameter Settings 12-16
Helpful Denitions 17
Connectors 18-19
RS232 Serial Output Format 20-23
4-20 mA Analog Output 24
Relay Output 25
Troubleshooting 26
Q&A 27
Contact Us 28
1
SAFETY PRECAUTIONS
For safe operation of the weighing indicator, please follow these
instructions:
Calibration inspection and maintenance of the indicator are prohibited by non-pro-
fessional staff
Please ensure that the indicator rests on a stable surface
The indicator is a piece of static sensitive equipment; Please cut off power during
electrical connections
Touching the internal components by hand is prohibited
DO NOT exceed the rated load limit of the unit
DO NOT step on the unit
DO NOT jump on the scale
DO NOT use this product if any of the components are cracked
DO NOT use for purposes other then weight taking
To avoid damaging the battery do not keep charger plugged in once battery is fully
charged
Make sure the weight is not over the Max capacity as it could damage the load cell
inside
Material that has a static electric charge could inuence the weighing. Discharge
the static electricity of the samples, if possible. Another
solution to the problem is to wipe both sides of the pan and the top of the case with
an anti-static agent
Please take anti-static prevention measures
Any accumulated charge on the body of the human operator should be discharged rst
before opening the protective container with ESDS devices inside. The discharge can
be accomplished by:
Putting a hand on a grounded surface or, ideally, by wearing a grounded Anti-static
Wrist Strap and an Anti-static Mat
PREPARATION & SET UP
Plug into a wall outlet to avoid interference with other wirings
Turn on the indicator while there is no load
Calibration may be required before weighing when the scale is initially installed or
moved from a location

Termékspecifikációk

Márka: Optima Scale
Kategória: mérleg
Modell: OP-412

Szüksége van segítségre?

Ha segítségre van szüksége Optima Scale OP-412, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók mérleg Optima Scale

Útmutatók mérleg

Legújabb útmutatók mérleg