Használati útmutató Optex SL-200QN

Optex nincs kategorizálva SL-200QN

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Optex SL-200QN (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
-1-
INSTALLATION INSTRUCTIONS
No. 59-1882-0
PHOTOELECTRIC DETECTOR
Smart Line series
• Quad high power beams
• Smart design
- Slim body design
- Easy-to-see vivid interior color for optical alignment
- IP65 waterproof structure
• View finder with 2X magnification
• Various options (refer to page 12)
( HU-3, ABC-4, BC-4, CBR-4, PSC-4, BAU-4 )
• Beam interruption adjustment function
• Tamper function
PHOTOELECTRIC DETECTOR
Smart Line series
FEATURES
INTRODUCTION
1-1 BEFORE YOUR OPERATION ....................... 1
1-2 PRECAUTIONS
.......................................................
2
1-3 PARTS IDENTIFICATION
.....................................
2
INSTALLATION
2-1 SEPARATING................................................. 3
2-2 WIRING ..........................................................3
2-3 TERMINAL .....................................................4
2-4 WIRING DIAGRAM ........................................4
2-5 WIRING DISTANCE BETWEEN POWER
SUPPLY AND DETECTOR ............................ 4
2-6 WALL MOUNTING .........................................5
2-7 POLE MOUNTING ......................................... 6
1
2
4
3
7
8
9
10
CONTENTS
2-8 MOUNTING IN THE BEAM TOWER..............7
FUNCTION SETTING
3-1 BEAM INTERRUPTION ADJUSTMENT........ 8
OPTICAL ALIGNMENT
4-1 OPTICAL ALIGNMENT FOR UPPER AND
LOWER BEAM............................................... 8
OPERATION CHECK ........................................... 9
OPTIONAL SETTING
6-1 HEATER UNIT HU-3 (OPTION) .................... 10
DIMENSIONS...................................................... 10
TROUBLESHOOTING ........................................ 11
SPECIFICATIONS ............................................... 11
OPTIONS ............................................................ 12
Detection range
SL-200QN
SL-350QN
SL-650QN
60m/200ft.
100m/350ft.
200m/650ft.
Model
6
5
Warning
Caution
• Read this instruction manual carefully prior to installation.
• After reading, store this manual carefully in an easily accessible place for reference.
• This manual uses the following warning indications for correct use of the product, harm to you or other people and damage to your assets, which
are described below. Be sure to understand the description before reading the rest of this manual.
INTRODUCTION
1
1-1 BEFORE YOUR OPERATION
Failure to follow the instructions provided with this indication and improper handling may cause
death or serious injury.
Failure to follow the instructions provided with this indication and improper handling may cause
injury and/or property damage.
This symbol indicates prohibition. The specific prohibited action is provided in and/or around the figure.
This symbol requires an action or gives an instruction.
Warning
Caution
Do not use the product for purposes other than the detection of moving objects such as
people and vehicles. Do not use the product to activate a shutter, etc., which may
cause an accident.
Do not touch the unit base or power terminals of the product with a wet hand (do not
touch when the product is wet with rain, etc.). It may cause electric shock.
Never attempt to disassemble or repair the product. It may cause fire or damage to the
devices.
Do not exceed the voltage or current rating specified for any of the terminals during
installation, doing so may cause fire or damage to the devices.
Do not pour water over the product with a bucket, hose, etc. The water may enter,
which may cause damage to the devices.
Clean and check the product periodically for safe use. If any problem is found, do not
attempt to use the product as it is and have the product repaired by a professional
engineer or electrician.
™
™
-2-
1-2 PRECAUTIONS
This symbol indicates prohibition. This symbol indicates recommendation.
Receiver
Transmitter
(another
detector)
Receiver
(another
detector)
Transmitter
At least 1 m (3.3 ft.)
Do not install the unit on an
unstable surface.
Do not install the pole in a
location where sufficient
stability can not be ensured.
Do not install the unit in a
location where trees, leaves, or
other objects that may swing in
the wind and block the beam.
Do not install the receiver in a
location where it is exposed to
direct sunlight.
Install the unit at a height
where an object can be
detected without fail.
Do not allow the infrared beam
from another detector to reach
the receiver.
Install the unit at least 1 m (3.3
ft.) away from the wall or fence
that may be running parallel to
the beam.
The pole size should be
34 - 48 mm
( 1.34 - 1.89 inch).
[Receiver]
Transmitter Receiver
1-3 PARTS IDENTIFICATION
Cover Main unit Chassis
Cover lock screw
Cut bush
for wiring
Main unit base
Mounting screw holes
Pole mounting
screw holes
Pole mounting
screw holes
Wall mounting
screw holes
Beam blocking plate
FUNCTION SETTING SECTION >> ACCESSORIES >>
U-brackets: 4
Pole brackets: 4
4×20 self tapping for wall mounting
(with rubber washer): 4
M4×30 screws for pole mounting
(with rubber washer): 8 Beam blocking plate: 2
(attached on the back of the cover)
3×6 self tapping for pole bracket: 4
Banding bands: 4
View finder
Terminals
Vertical alignment dial
Vertical alignment dial
Horizontal alignment dial
Optical lens
Horizontal alignment dial
View finder
Optical lens
Tamper button
<Transmitter> <Receiver>
R
Monitor jack (+)
Monitor jack (-)
Alarm indicator
Dip switch
T
Power indicator
-3-
2-1 SEPARATING
INSTALLATION
2
1Remove the cover.
2
1
2Remove the main unit from the chassis.
Pull the upper part of
main unit, and raise it to
remove.
Turn the optical unit 90 degrees
and loosen the screws (both
sides).
Do not place the main unit where it allows to incident direct sunlight to its optical lens during
installation. Doing so may cause damage to the product.
Caution
2-2 WIRING
1 Cut off the cut bush according to the cable size. 2
5
34
1 Preparing the cut bush
Cut the wiring grommet required according to the wire diameter. Use the lidded grommet for the wiring hole not to be used.
(I.D. : Inter diameter)
Refer to "TERMINAL" on Page
4 to make connections to the
terminals and refer to “OPTI-
CAL ALIGNMENT” on Page 8
to make alignment for the
maximum level of light
reception.
I.D. 10mm (0.39 inch)
I.D. 8mm (0.31 inch)
I.D.
6mm (0.24 inc
h
)
I.D. 4mm (0.16 inch)
I.D. 7mm (0.28 inch)
I.D. 6mm (0.24 inch)
I.D. 4mm (0.16 inch)
Pass the cable through the cut bush.
Connect to the terminalsCut the excess portion of the banding band.Tighten the cable with the banding band.
2 Threading the wire
Do not exceed the voltage or current rating specified for any of the terminals during
installation, doing so may cause fire or damage to the product.
Caution
Pull
Loosen the
cover lock screw.
2Twist it lightly.
A coin
(Not included)
1
3
1
2
3
4

Termékspecifikációk

Márka: Optex
Kategória: nincs kategorizálva
Modell: SL-200QN

Szüksége van segítségre?

Ha segítségre van szüksége Optex SL-200QN, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Optex

Optex

Optex AX-330PLUS Útmutató

2 Október 2024
Optex

Optex AP2-20N Útmutató

24 Szeptember 2024
Optex

Optex SIP-5030 Útmutató

19 Szeptember 2024
Optex

Optex SL-200QN Útmutató

13 Szeptember 2024
Optex

Optex WXS-RAM Útmutató

13 Szeptember 2024
Optex

Optex CW-G2 Útmutató

3 Szeptember 2024
Optex

Optex WXS-MW Útmutató

3 Szeptember 2024
Optex

Optex WXS-RDAM Útmutató

31 Augusztus 2024
Optex

Optex OAM-DUAL T Útmutató

31 Augusztus 2024
Optex

Optex OM-105C Útmutató

31 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Roland

Roland SD-20 Útmutató

16 Október 2024
SilverCrest

SilverCrest SRG 1300 C3 Útmutató

16 Október 2024
IFM

IFM TY0058 Útmutató

16 Október 2024
Thule

Thule Kit 186039 Útmutató

16 Október 2024
Blumfeldt

Blumfeldt Solidflor Útmutató

16 Október 2024
Dimplex

Dimplex QRAD200E Útmutató

16 Október 2024
DAS Audio

DAS Audio AX-112-5 Útmutató

16 Október 2024
Ferplast

Ferplast Ergocomfort Freetime Útmutató

16 Október 2024
AEG

AEG MECK52 Útmutató

16 Október 2024
Black Diamond

Black Diamond BD1121530000ALL1 Útmutató

16 Október 2024