Használati útmutató Optex Accurance R1002

Optex Beléptető rendszer Accurance R1002

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Optex Accurance R1002 (27 oldal) a Beléptető rendszer kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/27

Reverse detection system

ACCURANCE R1002

Installation instructions

(Ver. draft 0.00)

To find out useful hints, tips and information about OPTEX products

and services, please visit www.optex.net

59-2621-0

Read carefully before use

・ This product is designed to detect a person moving

(passing) through reverse direction in the security areas

or in the public areas. However, it is necessary to

understand beforehand that it is not possible to detect all

reverse motion. And it is also necessary to use under

restrictions of the product according to this installation

instructions.

・ Install the product properly according to required local

regulations or guidelines.

・ Do not connect a fire alarm or a smoke detector to this

product.

・ The product is designed to detect targets only and

therefore not to prevent property loss and casualty, or

physical damage.

・ Note that the manufacturer and distributors are not liable

for any densification by any damages.

■

Pictorial indication

These installation instructions use symbols to represent special attention for proper use of the product in order to

reduce the risk of any harm to other persons and property. Read carefully and understand the meaning of symbols as

described below.

Failure to follow the instructions provided with this indication and improper

handling may cause death or serious injury

Failure to follow the instructions provided with this indication and improper

handling may cause injury and/or property damage.

Indicates prohibition. Specific prohibited contents may be drawn in the figure, for example

disassembly prohibition.

Content to force or instruct actions.

59-2621-0

Document disclaimer

Read carefully the following instructions for installation, wiring and setting.

Follow the instructions below to reduce the risk of fire or electrical shock.

・ Turn off the power during the installation.

・ Connect wires into the terminal blocks firmly. Incomplete wiring or disconnection may cause a fire.

・ Use this product within the specification, such as the correct power source and power consumption.

When using this wrong and not within the environmental conditions, it may cause an electric shock, an

injury or a fire.

・ Stop using the product when smoke or a strange smell comes from the product, and when it is broken or

damaged.

・ Do not use the products beyond the specifications. Otherwise, it may cause a fire or an electric shock by

a short circuit or heat.

・ Do not wash or insert anything into the product.

・ Do not put anything over the product in use. It may generate heat and burn the inside which can result to

cause a fire or an electric shock.

・ Do not ever open, modify or repair the product.

To reduce the risk of injury

・ Check periodically whether the products (especially the detection unit) are mounted firmly. If the

mounting plate or screws rust, those may fall of and injure (a) person(s).

To reduce the risk of failure

・ Do not use the product under environments with extreme humidity, oil, smoke, dust and any severe

vibration.

・ Do not stand on the product or put any heavy objects on the product.

To reduce the risk of injury

・ Use the specified wires.

・ Make sure there are no objects next to the product, which may interfere to the performance, such as an

emergency light.

・ The product is designed only for interior usage; inside a building, so do not use it outside.

・ Do not install the product higher than mentioned in the specifications. This may decrease the

performance.

・ Do not touch the window of the detection unit, this may reduce the detection performance.

・ Do not spray any chemical products on the product, such as thinner, benzine, air freshener or insect

spray.

Termékspecifikációk

Márka:	Optex
Kategória:	Beléptető rendszer
Modell:	Accurance R1002

Szüksége van segítségre?

Ha segítségre van szüksége Optex Accurance R1002, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Beléptető rendszer Optex

Optex Accurance R1002 Útmutató

16 Július 2024

Útmutatók Beléptető rendszer

Legújabb útmutatók Beléptető rendszer

Hikvision DS-K3Y411X Útmutató

1 Április 2025

Hikvision DS-K1T8005EFX Útmutató

1 Április 2025

Hikvision DS-K3B801BX-L Útmutató

1 Április 2025

Hikvision DS-K1T808EFX Útmutató

1 Április 2025

Hikvision DS-K1T809EX Útmutató

1 Április 2025

Hikvision DS-K1T8005MFX Útmutató

1 Április 2025

Hikvision DS-K1T8005EFWX Útmutató

1 Április 2025

Hikvision DS-K3B961TX Útmutató

29 Március 2025

Hikvision DS-K3B530X-M Útmutató

29 Március 2025

Hikvision DS-K1T670MX Útmutató

28 Március 2025