Használati útmutató Novis KTC1

Novis vizforraló KTC1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Novis KTC1 (76 oldal) a vizforraló kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/76
Deutsch EnglishFrançaisItalianoNederlandsEspañolPortuguês
Ελληνικά
SvenskaNorskSuomiDanskPolski
Česky
عربي
Slovenščina
Türkçe
1
Novis Kettle / Instructions for Use
Contents Page
Applicable Kettle
This manual is valid for the following Novis appliances:
Safety Instructions
Your safety and the safety of others are of the utmost importance.
Several safety recommendations are listed in this instruction manual. Please read and always take this
safety advice into consideration.
Under this symbol, we warn you of any possible hazard that could cause death or injuries.
All the safety recommendations explain to you the kind of danger and provide advice on
how you could prevent the risk of injuries, keeping you informed of the consequences if you
do not follow the recommendations.
This symbol indicates useful operation advice.
When working with electrical equipment, the following basic safety precautions
should be observed at all times:
1. Read these instructions carefully.
2. To protect against the risk of electric shock, never put the Novis
Kettle into water or other liquids.
3. This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
4. Children must not play with the Novis Kettle.
5. Cleaning and user maintenance shall not be made by children
without supervision.
6. Remove the plug from the socket when you are not using or when
you are cleaning the Novis Kettle.
7. If you drop the appliance or if it is damaged in any way, contact the
nearest Novis customer service point and have the appliance
checked.
8. If the power cord is damaged, it must be replaced by the manufac-
turer or a qualified person in order to avoid hazards / damages.
9. Do not leave the power cord hanging over the edge of a table or
work surface and protect it from heat and oil.
10. If the plug does not fit into the socket, the device must not be used.
11. Novis assumes no liability if the device is used with a power
adapter.
Device Model
NOVIS® Kettle 6113 - Kettle K1 (Mechanical Version)
6114 - KettleKTC1 (Electronic Temperature Control)
Safety Instructions 1
Using the Unit for the first Time 2
Novis Kettle K1 Usage 2
Novis Kettle KTC1 Usage (Electronic Temperature Control) 2
Clean and Care 3
Specifications 3
Warranty 4
Disposal 4
Customer Service 4
2
12. Do not remove the plug from the socket by pulling the power cord;
do not remove the plug from the power socket with wet hands.
13. Never use defective parts.
14. Do not use the appliance outdoors.
15. Do not place the Novis Kettle on hot or wet surfaces and do not
operate the appliance near open flames.
16. Do not put your hands into the kettle while processing as this can
cause injuries or equipment damages.
17. Do not misuse the device for any other purpose than boiling water,
otherwise it may cause injuries or damage to the device.
18. Always disconnect the appliance from the supply if it is left
unattended.
19. If the kettle is overfilled, boiling water may be ejected.
20. The kettle is only to be used with the stand provided.
21. Warning: Avoid spillage on the connector
22. The heating element surface is subject to residual heat after use.
23. Do not remove the lid while the water is boiling
24. This appliance is intended to be used in household and similar
applications such as: Staff kitchen areas in shops, offices and other
working environments; Farm houses; By clients in hotels, motels and
other residential type environments; Bed and breakfast type
environments.
Keep these instructions for future reference.
Warning:
• Do not touch heating elements of the kettle during operation – it is dangerous.
• Avoid dropping or hitting of kettle, especially when filling it with water.
• When using the kettle, make sure that the lid (2) is closed tightly.
• Before removing the kettle from the base make sure that it is switched off.
Using the Unit for the first Time
• Before using the unit for the first time, remove all packing materials.
• Insert the power cord plug into the socket.
• Only for KTC1: You will hear a sound signal and the display (4) will switch on and the current
temperature inside the kettle will be indicated on the display (When water temperature is less than
30°C, screen shows ”—”).
• To fill the kettle with water take it off the base, open the lid (2) by pressing the lid opening button
(3).
• Fill the kettle with water till the max. mark on the water level scale, close the lid, place the kettle on
the base. Make sure that the lid (2) is closed tightly.
• Switch on the kettle by pressing the on/off switch (7).
• For KTC1: Press the on/off switch (7) for at least 2 seconds. The temperature setting will be 100°C.
Switch on the kettle by pressing the on/off switch (7) again.
• When water starts boiling, the kettle will switch off automatically. Pour out water and repeat boiling
procedure 2-3 times.
Novis Kettle K1 Usage
• Insert the power cord plug into the socket.
• To fill the kettle with water take it off the base, open the lid (2), by pressing the lid opening button
(3).
• Do not overfill the kettle (till the max. mark on the water level scale)
• Place the filled kettle on the base as convenient for you, as it allows unit 360°rotation.
• Switch on the kettle by pressing the on/off switch (8),
• The on/off switch (8) illumination will switch on.
Deutsch EnglishFrançaisItalianoNederlandsEspañolPortuguês
Ελληνικά
SvenskaNorskSuomiDanskPolski
Česky
عربي
Slovenščina
Türkçe
3
• When water starts boiling, the kettle will switch off automatically and the on/off switch (8)
illumination will extinguish.
Novis Kettle KTC1 Usage (Electronic Temperature Control)
“Heating to a preset temperature” function
• This function allows to select required water temperature for making different tea varieties.
• Press the button “+/-” to set the required water heating temperature (50, 60, 70, 80, 90, 95 or
100°C).
• Default temperature setting by the factory is 80°C.
• Switch on the kettle by pressing the “on/off” switch (7).
• When the preset temperature is reached, the kettle will switch off automatically, you will hear 5
sound signals.
• The kettle will switch directly to keep warm function for 30min (when the temperature is not more
than 90°C). If the preset temperute is more than 90°C, the kettle will cool down to 90°C and it
enters in keep warm function.
• Keep warm function can be canceled anytime by pressing shortly on “on/off” switch (7) or by taking
the kettle off the base.
“Set the heating temperature to 100°C directly”
• When the kettle is in ready mode or temperature setting mode, after pressing “on/off” switch (7) for
at least 2 seconds, 100°C will be saved.
“Set the heating temperature to 80°C directly”
• When the kettle is in ready mode or temperature setting mode, after pressing “+” + “-” button (5,6)
for at least 2 seconds, 80°C will be saved.
“Set the heating temperature to 60°C directly”
• When the kettle is in ready mode or temperature setting mode, after pressing “+” button (5) for at
least 2 seconds, 60°C will be saved.
“Standby mode”
• After 30 minutes waiting or if “keep warm” is not used, or after “keep warm” ends, the display will
extinguish automatically. The kettle will enter to standby mode.
• To wake up the kettle from the standby mode, lift it up and put it back on the power base or press
any one of the buttons (5,6,7).
Clean and Care
Descaling
• Scale, appearing inside the kettle, influences the water taste and disturbs the heat exchange between
water and heating element.
• To remove scale, fill the kettle with a mixture of one part ordinary vinegar and two parts water till the
max. mark.
• Boil water and leave the unit overnight. In the morning pour out the liquid, fill the kettle with water till
the max. mark, boil and pour out water.
• You can also use special detergents.
• Clean the kettle from scale regularly.
Storage
• Before taking the kettle away for storage, unplug it, pour out water and let the unit cool down.
• To avoid condensation during long storage, wipe the kettle dry.
• Keep the kettle away from children in a dry cool place.
Specifications
Nominal voltage 220-240 Volt
Nominal power 2000-2400 Watt
Frequency 50-60 Hertz
Maximal water capacity 1.6L
Cable length ~0.85 m
Material housing Metal
Test method:
EN/IEC 60335
(IEC 60335-2-14 and IEC 60335-1)

Termékspecifikációk

Márka: Novis
Kategória: vizforraló
Modell: KTC1

Szüksége van segítségre?

Ha segítségre van szüksége Novis KTC1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók vizforraló Novis

Novis

Novis KTC1 Útmutató

19 Augusztus 2024
Novis

Novis K1 Útmutató

19 Augusztus 2024

Útmutatók vizforraló

Legújabb útmutatók vizforraló

Tefal

Tefal BI7125KR Útmutató

16 Október 2024
Camry

Camry CR 1239 Útmutató

16 Október 2024
Concept

Concept RK0081 Útmutató

16 Október 2024
Schaub Lorenz

Schaub Lorenz W1 Útmutató

16 Október 2024
Proline

Proline KTL05 Útmutató

16 Október 2024
Kenwood

Kenwood SKM100 Útmutató

16 Október 2024
Bosch

Bosch TWK7S05GB Útmutató

16 Október 2024
Bosch

Bosch TWK79B05 Útmutató

15 Október 2024
Sharp

Sharp SA-BK2002I Útmutató

15 Október 2024
Exquisit

Exquisit WK 6103 swi Útmutató

15 Október 2024