Használati útmutató Noblechairs ICON Gaming Stoel Zwar

Noblechairs Gamestoel ICON Gaming Stoel Zwar

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Noblechairs ICON Gaming Stoel Zwar (8 oldal) a Gamestoel kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
HERO Series - Assembly Instructions
1x Allen Key
1
Read over the manual before you begin.
Two people are suggested for assembly.
CONTENT CHECKLIST
2x Philips Head Screw Screw Kit:
4x M8 Screw (20mm)
4x Split Washer
4x Washer
1x Neck Pillow 1x Lumbar Pillow
1x Wheel Base 1x Chair Base 1x Backrest
4x M8 Screw (30mm) with
pre-mounted Washers
1x Tilt Mechanism 5x Caster 1x Hydraulic Gas Lift 1x Hydraulic Sleeve 2x Side Cover 2x Lever Cover
5 6
5 6
1
1
2
2
3
3
4
4
2
WHEELBASE INSTALLATION
TILT MECHANISM INSTALLATION
Place the CHAIR BASE upside-down on a soft
surface and position the TILT MECHANISM in the
correct direction.
Insert the 5 CASTERS into the WHEEL BASE.
Push firmly to lock them into place.
Install the TILT MECHANISM by diagonally tightening
the screws into the CHAIR BASE with the ALLEN KEY.
Position the HYDRAULICS into the WHEEL BASE and place
the HYDRAULIC SLEEVE over it.
Place a SPLIT WASHER and then a WASHER onto
each of the 4 M8 SCREWS.
Place plastic LEVER COVERS onto metal handels,
align and push evenly into place.

Termékspecifikációk

Márka: Noblechairs
Kategória: Gamestoel
Modell: ICON Gaming Stoel Zwar

Szüksége van segítségre?

Ha segítségre van szüksége Noblechairs ICON Gaming Stoel Zwar, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Gamestoel Noblechairs

Útmutatók Gamestoel

Legújabb útmutatók Gamestoel