Használati útmutató Netgear Orbi RBK752
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Netgear Orbi RBK752 (134 oldal) a router kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/134
User Manual
Orbi Whole Home Tri-Band
Mesh WiFi 6 System
Orbi Router Model RBR750
Orbi Satellite Model RBS750
NETGEAR, Inc.
350 E. Plumeria DriveMarch 2020
San Jose, CA 95134, USA202-12070-01
Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc.
Any non-NETGEAR trademarks are used for reference purposes only.
2
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Contents
Chapter 1 Overview
Orbi router overview............................................................................8
Orbi router hardware features........................................................8
Orbi router LED behavior................................................................9
Orbi satellite overview.......................................................................10
Orbi satellite hardware features...................................................10
Orbi satellite LED behavior...........................................................10
Connect your router...........................................................................12
Place your Orbi satellite.....................................................................13
Sync your Orbi satellite with your Orbi router................................13
Chapter 2 Connect to the Network and Access the Router
Connect to the network.....................................................................15
Wired connection..........................................................................15
WiFi connection.............................................................................15
WiFi connection using WPS..........................................................16
Types of logins....................................................................................16
Router and satellite labels.................................................................16
Set up and manage with the NETGEAR Orbi app..........................17
Use a web browser to access the router..........................................18
Use the automatic Internet setup option....................................18
Log in to the Orbi router web interface......................................20
Change the language........................................................................20
Chapter 3 Specify Your Internet Settings
Manually set up the Internet connection.........................................22
Specify an Internet connection without a login..............................22
Specify an Internet connection that uses a login............................23
Manage an IPv6 Internet connection...............................................25
Requirements for entering IPv6 addresses.................................25
Specify IPv6 Internet connections................................................25
Use auto detection for an IPv6 Internet connection..................26
Use auto conguration for an IPv6 Internet connection...........27
Set up an IPv6 6rd tunnel Internet connection...........................28
Set up an IPv6 6to4 tunnel Internet connection.........................30
Set up an IPv6 pass-through Internet connection......................32
3
Set up an IPv6 xed Internet connection....................................32
Set up an IPv6 DHCP Internet connection..................................33
Set up an IPv6 PPPoE Internet connection..................................35
Change the MTU size.........................................................................37
Chapter 4 Control Access to the Internet
Allow or block access to your network............................................40
Use keywords to block Internet sites...............................................41
Delete keywords that are used to block Internet sites...................42
Avoid blocking on a trusted computer............................................43
Block services from the Internet.......................................................43
Manage network access control lists...............................................45
Schedule when to block Internet sites and services......................45
Set up security event email notications.........................................46
Chapter 5 Optimize Performance
Enable or disable Wi-Fi Multimedia Quality of Service.................50
Improve network connections with Universal Plug and Play........51
Chapter 6 Specify Network Settings
View or change WAN settings..........................................................54
Manage Dynamic DNS.......................................................................55
Set up a new Dynamic DNS account...........................................55
Specify a Dynamic DNS account that you already created......56
Change the Dynamic DNS settings.............................................57
Set up a default DMZ server..............................................................58
Change the router’s device name....................................................59
Change the LAN TCP/IP settings......................................................59
Use the router as a DHCP server......................................................61
Disable the DHCP server feature in the router...............................62
Manage reserved LAN IP addresses................................................63
Reserve an IP address....................................................................63
Edit a reserved IP address............................................................64
Delete a reserved IP address entry..............................................64
Manage custom static routes............................................................65
Set up a static route.......................................................................65
Edit a static route...........................................................................66
Delete a static route.......................................................................67
Specify basic WiFi settings................................................................68
Change the WiFi password or security level...................................69
Set up a guest WiFi network.............................................................70
Change your region...........................................................................71
Use the router as a WiFi access point only......................................72
Set up router mode............................................................................73
4
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Generate a new backhaul password................................................74
Set up a bridge for a port group or VLAN tag group....................74
Set up a bridge for a port group..................................................75
Set up a bridge for a VLAN tag group........................................76
Get Multi-Gig Internet with Internet port aggregation..................77
Chapter 7 Manage Your Network
Update the router and satellite rmware........................................80
Check for rmware updates.........................................................80
Manually update rmware............................................................81
Manually update satellite rmware..............................................81
Manually update router rmware................................................82
Change the admin password............................................................83
Enable admin password reset...........................................................83
Reset the admin password................................................................84
View router status and usage information.......................................85
Display Internet port statistics...........................................................85
Check the Internet connection status..............................................86
View satellite status............................................................................87
View and manage logs of router activity.........................................88
View devices connected to the network or edit device
information 89..........................................................................................
View devices connected to the network.....................................89
Edit device information on the Attached Devices page...........90
View satellites connected to the network or edit satellite
information 90..........................................................................................
View satellites connected to the network...................................90
Edit satellite information that displays on the Attached Devices
page 91.................................................................................................
Monitor Internet trafc.......................................................................92
Manage the router conguration le...............................................93
Back up settings.............................................................................94
Restore conguration settings.....................................................94
Erase the current conguration settings.....................................95
Set up remote management.............................................................95
Use remote access..............................................................................97
Remotely access your router using the Orbi app...........................97
Chapter 8 Customize Internet Trafc Rules for Ports
Manage port forwarding to a local server.......................................99
Set up port forwarding to a local server......................................99
Add a custom port forwarding service.....................................100
Edit a port forwarding service....................................................101
Delete a port forwarding entry..................................................102
5
Orbi Whole Home Tri-Band Mesh WiFi 6 System
How the router implements the port forwarding rule.............102
Application example: Make a local web server public...........103
Manage port triggering...................................................................103
Add a port triggering service.....................................................104
Disable port triggering or change the time-out period.........105
Application example: Port triggering for Internet Relay Chat.105
Chapter 9 Use VPN to Access Your Network
Set up a VPN connection.................................................................108
Specify VPN service in the router...................................................108
Install OpenVPN software...............................................................109
Install OpenVPN software on your Windows-based computer 109.
Install OpenVPN software on your Mac computer..................112
Install OpenVPN software on an iOS device............................113
Install OpenVPN software on an Android device....................113
Use a VPN tunnel on your Windows-based computer................114
Use VPN to access your Internet service at home........................116
Set up VPN client Internet access in the router........................116
Block VPN client Internet access in the router.........................117
Use a VPN tunnel to access your Internet service at home....117
Chapter 10 Troubleshooting
Quick tips...........................................................................................119
Sequence to restart your network.............................................119
WiFi settings.................................................................................119
Network settings..........................................................................119
The router and satellite do not sync..............................................119
You cannot log in to the router.......................................................120
You cannot access the Internet.......................................................121
Troubleshoot Internet browsing.....................................................122
Troubleshoot PPPoE........................................................................123
Troubleshoot WiFi connectivity......................................................123
Troubleshoot your network using the ping utility........................124
Test the LAN path to your router...............................................124
Test the path from your computer to a remote device...........125
Chapter 11 Supplemental Information
Factory settings.................................................................................128
Factory settings for Orbi router model RBR750......................128
Factory settings for Orbi satellite model RBS750....................130
Technical specications...................................................................132
Technical specications for Orbi router model RBR750.........132
Technical specications for Orbi satellite model RBS750......133
6
Orbi Whole Home Tri-Band Mesh WiFi 6 System
1
Overview
The Orbi™ Mesh WiFi System creates dedicated high-speed WiFi connections to your
Internet service. The Orbi router (model RBR750) connects to your modem or gateway.
The Orbi satellite (model RBS750) extends the WiFi signal throughout your home.
This manual describes how to manage your Orbi Mesh WiFi System from your Orbi
router web interface. You can manage your Orbi satellite from the Orbi router web
interface.
This chapter contains the following sections:
• Orbi router overview
• Orbi satellite overview
• Connect your router
• Place your Orbi satellite
• Sync your Orbi satellite with your Orbi router
For more information about the topics covered in this manual, visit the support website
at https://www.netgear.com/support/.
Note: This manual might refer to the Orbi router (model RBR750) as the androuter
refer to the Orbi satellite (model RBS750) as the .satellite
7
Orbi router overview
The following sections are an overview of the Orbi router hardware features and LED
behavior.
Orbi router hardware features
The following gures shows the Orbi router hardware features.
Figure 1. Orbi router front and back views
1 32 4 5 6
7
1. Router LED
2. Sync button
3. Internet port
4. Ethernet ports 1–3
Note: Ethernet Port 1 and the Internet port can be used to set up Internet port
aggregation (also called WAN link aggregation). For more information, see Get
Multi-Gig Internet with Internet port aggregation on page 77.
5. Power LED
6. Power connector
7. Reset button
User Manual8Overview
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Orbi router LED behavior
The Orbi router includes a Router LED on the front and a Power LED on the back.
The following table describes the LED behavior for the router’s Power LED on the back
Table 1. Power LED behavior
DescriptionLED color
Power is on.Solid green
The router is booting.Solid amber
The router’s rmware is resetting to its factory default settings.Blinking amber
The router’s rmware is corrupted.Blinking red
Power is not suppliedOff
The following table describes the LED behavior for the Router LED on the front.
Table 2. Router LED behavior
DescriptionLED color
The router is booting or someone pressed the button.Pulsing white Sync
The router is resetting to its factory default settings.Solid white
The router cannot connect to the Internet.Solid magenta
The router nished booting and is working normally.Off
User Manual9Overview
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Orbi satellite overview
The following sections are an overview of the Orbi satellite hardware features and LED
behavior.
Orbi satellite hardware features
The following gures shows the Orbi satellite hardware features.
1 32 4 5
6
Figure 2. Orbi satellite front and back views
1. Satellite LED
2. Sync button
3. Ethernet ports 1–2
4. Power LED
5. Power connector
6. Reset button
Orbi satellite LED behavior
The Orbi satellite includes a Satellite LED on the front and a Power LED on the back.
The following table describes the LED behavior for the satellite’s Power LED on the
back.
User Manual10Overview
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Table 3. Power LED behavior
DescriptionLED color
Power is on.Solid green
The satellite is booting.Solid amber
The satellite’s rmware is resetting to its factory default settings.Blinking amber
The satellite’s rmware is corrupted.Blinking red
Power is not suppliedOff
The following table describes the LED behavior for the Satellite LED on the front.
Table 4. Satellite LED behavior
DescriptionLED color
The satellite is booting.Pulsing white
The connection between the satellite and router is good.
The LED lights blue for three minutes and then turns off.
Blue
The connection between the satellite and router is fair.
The LED lights amber for three minutes and then turns off.
Amber
The satellite failed to sync with the router.Magenta
The satellite synced with the router and is working normally.Off
User Manual11Overview
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Connect your router
Power on your router and connect it to a modem.
To cable your router:
1. Unplug your modem’s power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery.
2. Plug in and turn on your modem.
If your modem uses a battery backup, put the battery back in.
3. Connect your modem to the Internet port of your router with the Ethernet cable that
came with your router.
4. Connect the power adapter to your router and plug the power adapter into an outlet.
5. If the Power LED does not light, make sure that the power adapter is properly
connected to your router and power outlet.
User Manual12Overview
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Place your Orbi satellite
Your Orbi satellite must be within range of your Orbi router’s WiFi signal so that it can
sync with your router. Use your satellite’s LED to help you determine where to place
your satellite.
Sync your Orbi satellite with your Orbi router
The Orbi satellite that comes with your Orbi router is preset to automatically nd and
sync to your Orbi router’s WiFi signal.
To sync your satellite:
1. Place your satellite.
For more information, see Place your Orbi satellite on page 13.
2. Connect the satellite to a power source.
The satellite LED pulses white. The satellite automatically nds the Orbi router’s WiFi
signal and attempts to sync to the Orbi router.
The satellite LED lights one of the following colors:
•Blue. The Orbi router and satellite successfully synced, and the connection
between the router and satellite is good.
•Amber. The connection with the router is fair. We recommend that you move
the Orbi satellite closer to the Orbi router and try again.
3. If the satellite LED lights magenta, do the following:
a. Unplug your Orbi satellite, move the satellite closer to the router.
b. Plug the satellite back in, and wait two minutes for the LED to turn blue or amber.
4. If the satellite LED still does not turn blue or amber, do the following:
a. Press the button on the back of the router.Sync
b. Within two minutes press the button on the back of the satellite.Sync
c. Wait two minutes for the LED to turn blue or amber.
User Manual13Overview
Orbi Whole Home Tri-Band Mesh WiFi 6 System
2
Connect to the Network and Access
the Router
This chapter contains the following sections:
• Connect to the network
• Types of logins
• Router and satellite labels
• Set up and manage with the NETGEAR Orbi app
• Use a web browser to access the router
• Change the language
14
Connect to the network
You can connect to the Orbi network through a wired or WiFi connection. If you set up
your computer to use a static IP address, change the settings so that it uses Dynamic
Host Conguration Protocol (DHCP).
Wired connection
You can connect your computer to the router using an Ethernet cable and join the
router’s local area network (LAN).
To connect your computer to the router with an Ethernet cable:
1. Make sure that the router is receiving power (its Power LED is lit).
2. Connect an Ethernet cable to an Ethernet port on your computer.
3. Connect the other end of the Ethernet cable to one of the router’s Ethernet ports.
Your computer connects to the local area network (LAN). A message might display
on your computer screen to notify you that an Ethernet cable is connected.
WiFi connection
If you're installing your Orbi router for the rst time, you can connect to the router's
WiFi network by scanning the QR code on your router with the camera app on your
mobile device. To scan the QR code with your camera app, your mobile device must
have iOS version 11 or later or Android version 10 or later.
You can also manually nd and select the Orbi router's WiFi network from your
WiFi-enabled computer or mobile device.
To nd and select the WiFi network:
1. Make sure that the router or satellite is receiving power (its Power LED is lit).
2. On your WiFi-enabled computer or mobile device, nd and select the WiFi network.
The WiFi network name is on the router label. The WiFi network name is the same
for the router and the satellite in the Orbi WiFi System.
Note: If you bought the router and the satellite separately, their default WiFi network
names are different.
3. Join the WiFi network and enter the WiFi password.
The password is on the router label.
Your WiFi-enabled computer or mobile device connects to the WiFi network.
User Manual15Connect to the Network and
Access the Router
Orbi Whole Home Tri-Band Mesh WiFi 6 System
WiFi connection using WPS
You can connect to the router’s WiFi network with Wi-Fi Protected Setup (WPS) or you
can nd and select the WiFi network.
To use WPS to connect to the WiFi network:
1. Make sure that the router is receiving power (its Power LED is lit).
2. Check the WPS instructions for your computer or WiFi device.
3. Press the button on the router.Sync
4. Within two minutes, on your WiFi-enabled computer or mobile device, press its WPS
button or follow its instructions for WPS connections.
Your computer or mobile device connects to the WiFi network.
Types of logins
Separate types of logins serve different purposes. It is important that you understand
the difference so that you know which login to use when.
Types of logins:
•Internet service login. The login that your Internet service provider (ISP) gave you
logs you in to your Internet service. Your service provider gave you this login
information in a letter or some other way. If you cannot nd this login information,
contact your service provider.
•WiFi network key or password. Your router and satellite are preset with the same
WiFi network name (SSID) and password for WiFi access. This information is on the
router label and the satellite label.
•Router login. This logs you in to the router interface from a web browser as admin.
Router and satellite labels
The Orbi router and satellite label shows the router’s or satellite's MAC address and
serial number. The label also includes a QR code you can scan during the setup to
connect to the Orbi setup network. The following are examples of what the router and
satellite labels might look like:
User Manual16Connect to the Network and
Access the Router
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Figure 3. Router label (left) and satellite label (right)
Set up and manage with the NETGEAR Orbi
app
You can use the NETGEAR Orbi app to set up and access your Orbi network.
To nd the app, scan a QR code or search for NETGEAR Orbi in the Apple App Store
or Google Play Store.
For more information about the Orbi app, visit
https://www.netgear.com/home/apps-services/orbi-app.
Note: If you do not want to use the NETGEAR Orbi app, you can use the Orbi router
web interface to set up your Orbi devices. For more information about how to access
your Orbi router web interface, see Use a web browser to access the router on page
18.
User Manual17Connect to the Network and
Access the Router
Orbi Whole Home Tri-Band Mesh WiFi 6 System
To set up your Orbi WiFi system with the Orbi app:
1. Download the NETGEAR Orbi app on your mobile device.
2. On your mobile device, open the WiFi connection manager.
3. Locate and connect your mobile device to your Orbi WiFi network.
Your preset Orbi WiFi network and password displays on the Orbi router label. You
can change the WiFi credentials after the setup.
4. Launch the Orbi app and follow the setup instructions.
Use a web browser to access the router
When you connect to the network (either with WiFi or with an Ethernet cable), you can
use a web browser to access the router to view or change its settings. The rst time you
access the router, the NETGEAR installation assistant automatically checks to see if your
router can connect to your Internet service.
Use the automatic Internet setup option
You can set up your router automatically, or you can use a web browser to access the
router and set up your router manually. Before you start the setup process, get your ISP
information and make sure that the computers and devices in the network use the
settings described here.
When your Internet service starts, your Internet service provider (ISP) typically gives you
all the information needed to connect to the Internet. For DSL service, you might need
the following information to set up your router:
•The ISP conguration information for your DSL account
•ISP login name and password
•Fixed or static IP address settings (special deployment by ISP; this setting is rare)
If you cannot locate this information, ask your ISP to provide it. When your Internet
connection is working, you no longer need to launch the ISP login program on your
computer to access the Internet. When you start an Internet application, your router
automatically logs you in.
Installation and basic setup takes about 15 minutes to complete.
User Manual18Connect to the Network and
Access the Router
Orbi Whole Home Tri-Band Mesh WiFi 6 System
To automatically set up your router:
1. Power on your router.
2. Make sure that your WiFi-enabled computer or mobile device is connected to the
router with an Ethernet cable (wired) or wirelessly with the preset WiFi security
settings listed on the label.
Note: If you want to change the router’s WiFi settings, use a wired connection to
avoid being disconnected when the new WiFi settings take effect.
3. Launch a web browser.
The page that displays depends on whether you accessed the router before:
•The rst time that you set up the Internet connection for your router, the browser
goes to , and the Orbi login page displays.orbilogin.com
•If you already set up the Internet connection, enter in the addressorbilogin.com
eld for your browser to start the installation process.
4. Follow the onscreen instructions.
The router connects to the Internet.
5. If the browser does not display the web page, do the following:
•Make sure that the computer is connected to one of the four LAN Ethernet ports
or over WiFi to the router.
•Make sure that the router is receiving power, and that its Power LED is lit.
•Close and reopen the browser or clear the browser cache.
•Browse to orbilogin.com.
•If the computer is set to a static or xed IP address (this setting is uncommon),
change it to obtain an IP address automatically from the router.
6. If the router does not connect to the Internet, do the following:
a. Review your settings.
b. Make sure that you selected the correct options and typed everything correctly.
c. Contact your ISP to verify that you are using the correct configuration information.
d. Read Troubleshooting on page 118.
If problems persist, register your NETGEAR product and contact NETGEAR
technical support.
User Manual19Connect to the Network and
Access the Router
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Log in to the Orbi router web interface
When you log in to the Orbi, the browser displays the router web interface. You can
use the router web interface to change the router or satellite settings.
To log in to your Orbi:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the router admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
Change the language
By default, the language is set as Auto.
To change the language:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the router admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. In the upper right corner, select a language from the menu.
5. When prompted, click the button to conrm this change.OK
The page refreshes with the language that you selected.
User Manual20Connect to the Network and
Access the Router
Orbi Whole Home Tri-Band Mesh WiFi 6 System
3
Specify Your Internet Settings
Usually, the quickest way to set up the router to use your Internet connection is to allow
Orbi to detect the Internet connection when you rst access the router with a web
browser. You can also customize or specify your Internet settings.
This chapter contains the following sections:
• Manually set up the Internet connection
• Specify an Internet connection without a login
• Specify an Internet connection that uses a login
• Manage an IPv6 Internet connection
• Change the MTU size
21
Manually set up the Internet connection
You can view or change the router’s Internet connection settings.
Specify an Internet connection without a
login
To specify the Internet connection settings:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .Internet
The Internet Setup page.
5. Leave the Does your Internet connection require a login radio button selected.No
6. If your Internet connection requires an account name or host name, type it in the
Account Name (If Required) eld.
7. If your Internet connection requires a domain name, type it in the Domain Name (If
Required) eld.
For the other sections in this page, the default settings usually work, but you can
change them.
8. Select an Internet IP Address radio button:
•Get Dynamic IP Address From Router. Your ISP uses DHCP to assign your IP
address. Your ISP automatically assigns these addresses.
•Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned. The gateway is the ISP router to which your router
connects.
User Manual22Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
9. Select a Domain Name Server (DNS) Address radio button:
•Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.
•Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
10. Select a Router MAC Address radio button:
•Use Default Address. Use the default MAC address.
•Use Computer MAC Address. The router captures and uses the MAC address
of the computer that you are now using. You must use the one computer that the
ISP allows.
•Use This MAC Address. Enter the MAC address that you want to use.
11. Click the button.Apply
Your settings are saved.
12. Click the button to test your Internet connection.Test
Specify an Internet connection that uses a
login
To view or change the basic Internet setup:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .Internet
The Internet Setup page displays.
5. Select the Does your Internet connection require a login radio button.Yes
The page adjusts.
User Manual23Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
6. From the menu, select the encapsulation method:Internet Service Provider
The selections are , , or .PPPoE PPTP L2TP
7. In the eld, enter the login name your ISP gave you.Login
This login name is often an email address.
8. In the eld, type the password that you use to log in to your InternetPassword
service.
9. If your ISP requires a service name, type it in the eld.Service Name (if Required)
10. From the menu, select , , orConnection Mode Always On Dial on Demand Manually
Connect.
11. To change the number of minutes until the Internet login time out, in the Idle Timeout
(In minutes) eld, type the number of minutes.
This is how long the router keeps the Internet connection active when no one on the
network is using the Internet connection. A value of 0 (zero) means never log out.
12. Select an Internet IP Address radio button:
•Get Dynamic IP Address From Router. Your ISP uses DHCP to assign your IP
address. Your ISP automatically assigns these addresses.
•Use Static IP Address. Enter the IP address, IP subnet mask, and gateway IP
address that your ISP assigned. The gateway is the ISP router to which your router
connects.
13. Select a Domain Name Server (DNS) radio button:
•Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.
•Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
14. Select a Router MAC Address radio button:
•Use Default Address. Use the default MAC address.
•Use Computer MAC Address. The router captures and uses the MAC address
of the computer that you are now using. You must use the one computer that the
ISP allows.
•Use This MAC Address. Enter the MAC address that you want to use.
15. Click the button.Apply
Your settings are saved.
User Manual24Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
16. Click the button to test your Internet connection.Test
Manage an IPv6 Internet connection
The router supports many different types of IPv6 Internet connections for which you can
specify the settings manually.
Requirements for entering IPv6 addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated
by colons. You can reduce any four-digit group of zeros within an IPv6 address to a
single zero or omit it. The following errors invalidate an IPv6 address:
•More than eight groups of hexadecimal quartets
•More than four hexadecimal characters in a quartet
•More than two colons in a row
Specify IPv6 Internet connections
You can set up an IPv6 Internet connection if the router does not detect it automatically.
To set up an IPv6 Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Advanced > IPv6
The IPv6 page displays.
5. From the menu, select the IPv6 connection type:Internet Connection Type
•If you are not sure, select so that the router detects the IPv6 typeAuto Detect
that is in use.
•If your Internet connection does not use PPPoE, DHCP, or xed, but is IPv6, select
Auto Cong.
User Manual25Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Your Internet service provider (ISP) can provide this information.
For more information about IPv6 Internet connection, see the following sections:
•Use auto detection for an IPv6 Internet connection on page 26
•Use auto conguration for an IPv6 Internet connection on page 27
•Set up an IPv6 6rd tunnel Internet connection on page 28
•Set up an IPv6 6to4 tunnel Internet connection on page 30
•Set up an IPv6 pass-through Internet connection on page 32
•Set up an IPv6 xed Internet connection on page 32
•Set up an IPv6 DHCP Internet connection on page 33
•Set up an IPv6 PPPoE Internet connection on page 35
6. Click the button.Apply
Your settings are saved.
Use auto detection for an IPv6 Internet connection
To set up an IPv6 Internet connection through auto detection:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Advanced > IPv6
The IPv6 page displays.
5. From the menu, select .Internet Connection Type Auto Detect
The page adjusts.
The router automatically detects the information in the following elds:
•Connection Type. This eld indicates the connection type that is detected.
•Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the
User Manual26Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
length of the prex, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the eld displays Not Available.
•Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the
prex, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the eld displays Not Available.
6. Select an IP Address Assignment radio button:
•Use DHCP Server. This method passes more information to LAN devices, but
some IPv6 systems might not support the DHCv6 client function.
•Auto Cong. This is the default setting.
This setting species how the router assigns IPv6 addresses to the devices on your
home network (the LAN).
7. (Optional) Select the check box and specify the interface IDUse This Interface ID
to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
8. Click the button.Apply
Your settings are saved.
Use auto conguration for an IPv6 Internet connection
To set up an IPv6 Internet connection through auto conguration:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Advanced > IPv6
The IPv6 page displays.
5. From the menu, select .Internet Connection Type Auto Cong
The page adjusts.
User Manual27Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
The router automatically detects the information in the following elds:
•Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the
length of the prex, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the eld displays Not Available.
•Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the
prex, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the eld displays Not Available.
6. (Optional) In the eld, enter a host name.DHCP User Class (If Required)
Most people can leave this eld blank, but if your ISP gave you a specic host name,
enter it here.
7. (Optional) In the eld, enter a domain name.DHCP Domain Name (If Required)
You can type the domain name of your IPv6 ISP. Do not enter the domain name for
the IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type
xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this
field. For example, Earthlink Cable might require a host name of home, and Comcast
sometimes supplies a domain name.
8. Select an IP Address Assignment radio button:
•Use DHCP Server. This method passes more information to LAN devices, but
some IPv6 systems might not support the DHCv6 client function.
•Auto Cong. This is the default setting.
9. (Optional) Select the check box and specify the interface IDUse This Interface ID
that you want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
10. Click the button.Apply
Your settings are saved.
Set up an IPv6 6rd tunnel Internet connection
The 6rd protocol makes it possible to deploy IPv6 to sites using a service provider’s
IPv4 network. 6rd uses the service provider’s own IPv6 address prex. This limits the
operational domain of 6rd to the service provider’s network and is under direct control
of the service provider. The IPv6 service provided is equivalent to native IPv6. The 6rd
mechanism relies on an algorithmic mapping between the IPv6 and IPv4 addresses that
User Manual28Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
are assigned for use within the service provider’s network. This mapping allows for
automatic determination of IPv4 tunnel endpoints from IPv6 prexes, allowing stateless
operation of 6rd.
With a 6rd Tunnel conguration, the router follows the RFC5969 standard, supporting
two ways to establish a 6rd tunnel IPv6 WAN connection:
•Auto Detect Mode. In IPv6 Auto Detect mode, when the router receives option 212
from the DHCPv4 option, auto detect selects the IPv6 as 6rd Tunnel setting. The
router uses the 6rd option information to establish the 6rd connection.
•Manual Mode. Select 6rd. If the router receives option 212, the elds are
automatically completed. Otherwise, you must enter the 6rd settings.
To set up an IPv6 6rd tunnel Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Advanced > IPv6
The IPv6 page displays.
5. In the menu, select .Internet Connection Type 6rd Tunnel
The page adjusts.
The router automatically detects the information in the following sections:
•6rd (IPv6 Rapid Development) Conguration. The router detects the service
provider’s IPv4 network and attempts to establish an IPv6 6rd Tunnel connection.
If the IPv4 network returns 6rd parameters to the router, the page adjusts to
display the correct settings in this section.
•Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the
prex, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the eld displays Not Available.
User Manual29Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
6. Select an IPv6 Domain Name Server (DNS) Address radio button:
•Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.
•Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
7. Select an IP Address Assignment radio button:
•Use DHCP Server. This method passes more information to LAN devices, but
some IPv6 systems might not support the DHCv6 client function.
•Auto Cong. This is the default setting.
This setting species how the router assigns IPv6 addresses to the devices on your
home network.
8. (Optional) Select the check box and specify the interface IDUse This Interface ID
that you want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
9. Click the button.Apply
Your settings are saved.
Set up an IPv6 6to4 tunnel Internet connection
The remote relay router is the device to which your router creates a 6to4 tunnel. Make
sure that the IPv4 Internet connection is working before you apply the 6to4 tunnel
settings for the IPv6 connection.
To set up an IPv6 Internet connection by using a 6to4 tunnel:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Advanced > IPv6
User Manual30Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
The IPv6 page displays.
5. From the menu, select .Internet Connection Type 6to4 Tunnel
The page adjusts.
The router automatically detects the information in the Router’s IPv6 Address on
LAN eld. This eld shows the IPv6 address that is acquired for the router’s LAN
interface. The number after the slash (/) is the length of the prex, which is also
indicated by the underline (_) under the IPv6 address. If no address is acquired, the
eld displays Not Available.
6. Select a Remote 6to4 Relay Router radio button:
•Auto. Your router uses any remote relay router that is available on the Internet.
This is the default setting.
•Static IP Address. Enter the static IPv4 address of the remote relay router. Your
IPv6 ISP usually provides this address.
7. Select an IPv6 Domain Name Server (DNS Address) radio button:
•Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.
•Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
8. Select an IP Address Assignment radio button:
•Use DHCP Server. This method passes more information to LAN devices, but
some IPv6 systems might not support the DHCv6 client function.
•Auto Cong. This is the default setting.
This setting species how the router assigns IPv6 addresses to the devices on your
home network.
9. (Optional) Select the check box and specify the interface IDUse This Interface ID
that you want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
10. Click the button.Apply
Your settings are saved.
User Manual31Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Set up an IPv6 pass-through Internet connection
In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN
and WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header
packets.
To set up a pass-through IPv6 Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Advanced > IPv6
The IPv6 page displays.
5. From the menu, select .Internet Connection Type Pass Through
The page adjusts, but no additional elds display.
6. Click the button.Apply
Your settings are saved.
Set up an IPv6 xed Internet connection
To set up a xed IPv6 Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Advanced > IPv6
The IPv6 page displays.
User Manual32Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
5. From the menu, select .Internet Connection Type Fixed
The page adjusts.
6. Congure the xed IPv6 addresses for the WAN connection:
•IPv6 Address/Prex Length. The IPv6 address and prex length of the router
WAN interface.
•Default IPv6 Gateway. The IPv6 address of the default IPv6 gateway for the
router’s WAN interface.
•Primary DNS Server. The primary DNS server that resolves IPv6 domain name
records for the router.
•Secondary DNS Server. The secondary DNS server that resolves IPv6 domain
name records for the router.
Note: If you do not specify the DNS servers, the router uses the DNS servers that
are congured for the IPv4 Internet connection on the Internet Setup page. (See
Manually set up the Internet connection on page 22.)
7. Select an IP Address Assignment radio button:
•Use DHCP Server. This method passes more information to LAN devices, but
some IPv6 systems might not support the DHCv6 client function.
•Auto Cong. This is the default setting.
This setting species how the router assigns IPv6 addresses to the devices on your
home network.
8. In the elds, specify the static IPv6 address and prexIPv6 Address/Prex Length
length of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
9. Click the button.Apply
Your settings are saved.
Set up an IPv6 DHCP Internet connection
To set up an IPv6 Internet connection with a DHCP server:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
User Manual33Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Advanced > IPv6
The IPv6 page displays.
5. From the menu, select .Internet Connection Type DHCP
The page adjusts.
The router automatically detects the information in the following elds:
•Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the
length of the prex, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the eld displays Not Available.
•Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the
prex, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the eld displays Not Available.
6. Select an IPv6 Domain Name Server (DNS) Address radio button:
•Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.
•Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
7. (Optional) In the eld, enter a host name.User Class (If Required)
Most people can leave this eld blank, but if your ISP gave you a specic host name,
enter it here.
8. (Optional) In the eld, enter a domain name.Domain Name (If Required)
You can type the domain name of your IPv6 ISP. Do not enter the domain name for
the IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type
xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this
field. For example, Earthlink Cable might require a host name of home, and Comcast
sometimes supplies a domain name.
User Manual34Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
9. Select an IP Address Assignment radio button:
•Use DHCP Server. This method passes more information to LAN devices, but
some IPv6 systems might not support the DHCv6 client function.
•Auto Cong. This is the default setting.
This setting species how the router assigns IPv6 addresses to the devices on your
home network (the LAN).
10. (Optional) Select the check box and specify the interface IDUse This Interface ID
that you want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
11. Click the button.Apply
Your settings are saved.
Set up an IPv6 PPPoE Internet connection
To set up a PPPoE IPv6 Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Advanced > IPv6
The IPv6 page displays.
5. From the menu, select .Internet Connection Type PPPoE
The page adjusts.
The router automatically detects the information in the following elds:
•Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the
User Manual35Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
length of the prex, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the eld displays Not Available.
•Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the
prex, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the eld displays Not Available.
6. In the eld, enter the login information for the ISP connection.Login
This is usually the name that you use in your email address. For example, if your main
mail account is JerAB@ISP.com, you would type JerAB in this eld. Some ISPs (like
Earthlink and Deutsche Telekom) require that you use your full email address when
you log in. If your ISP requires your full email address, type it in this eld.
7. In the eld, enter the password for the ISP connection.Password
8. In the eld, enter a service name.Service Name
If your ISP did not provide a service name, leave this eld blank.
Note: Connection ModeThe default setting of the eld is Always On to provide a
steady IPv6 connection. The router never terminates the connection. If the connection
is terminated, for example, when the modem is turned off, the router attempts to
reestablish the connection immediately after the PPPoE connection becomes available
again.
9. Select an IPv6 Domain Name Server (DNS) Address radio button:
•Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.
•Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
10. Select an IP Address Assignment radio button:
•Use DHCP Server. This method passes more information to LAN devices, but
some IPv6 systems might not support the DHCv6 client function.
•Auto Cong. This is the default setting.
This setting species how the router assigns IPv6 addresses to the devices on your
home network (the LAN).
11. (Optional) Select the check box and specify the interface IDUse This Interface ID
that you want to be used for the IPv6 address of the router’s LAN interface.
User Manual36Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
If you do not specify an ID here, the router generates one automatically from its MAC
address.
12. Click the button.Apply
Your settings are saved.
Change the MTU size
The maximum transmission unit (MTU) is the largest data packet a network device
transmits. When one network device communicates across the Internet with another,
the data packets travel through many devices along the way. If a device in the data path
uses a lower MTU setting than the other devices, the data packets must be split or
“fragmented” to accommodate the device with the smallest MTU.
The best MTU setting for NETGEAR equipment is often the default value. In some
situations, changing the value xes one problem but causes another. Leave the MTU
unchanged unless one of these situations occurs:
•You experience problems connecting to your ISP or other Internet service, and the
technical support of either the ISP or NETGEAR recommends changing the MTU
setting. These web-based applications might require an MTU change:
- A secure website that does not open, or displays only part of a web page
- Yahoo email
- MSN portal
•You use VPN and experience severe performance problems.
•You used a program to optimize MTU for performance reasons, and now you are
experiencing connectivity or performance problems.
Note: An incorrect MTU setting can cause Internet communication problems. For
example, you might not be able to access certain websites, frames within websites,
secure login pages, or FTP or POP servers.
To change the MTU size:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
User Manual37Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Setup > WAN Setup
The WAN Setup page displays.
5. In the eld, enter a value from 64 to 1500.MTU Size
6. Click the Apply button.
Your settings are saved.
If you suspect an MTU problem, a common solution is to change the MTU to 1400.
If you are willing to experiment, you can gradually reduce the MTU from the maximum
value of 1500 until the problem goes away. The following table describes common
MTU sizes and applications.
Table 5. Common MTU sizes
ApplicationMTU
The largest Ethernet packet size. This setting is typical for connections that do not use PPPoE
or VPN, and is the default value for NETGEAR routers, adapters, and switches.
1500
Used in PPPoE environments.1492
Maximum size to use for pinging. (Larger packets are fragmented.)1472
Used in some DHCP environments.1468
Used in PPTP environments or with VPN.1436
Typical value to connect to dial-up ISPs.576
User Manual38Specify Your Internet Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
4
Control Access to the Internet
The router comes with a built-in rewall that helps protect your home network from
unwanted intrusions from the Internet.
This chapter includes the following sections:
• Allow or block access to your network
• Use keywords to block Internet sites
• Delete keywords that are used to block Internet sites
• Avoid blocking on a trusted computer
• Block services from the Internet
• Manage network access control lists
• Schedule when to block Internet sites and services
• Set up security event email notications
39
Allow or block access to your network
You can use access control to block access to your network.
To set up access control:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Security > Access Control
The Access Control page displays.
5. Select the check box.Turn on Access Control
You must select this check box before you can specify an access rule and use the
Allow and Block buttons. When this check box is cleared, all devices are allowed to
connect, even if a device is in the blocked list.
6. Select an access rule:
•Allow all new devices to connect. With this setting, if you buy a new device, it
can access your network. You don’t need to enter its MAC address on this page.
We recommend that you leave this radio button selected.
•Block all new devices from connecting. With this setting, if you buy a new
device, before it can access your network, you must enter its MAC address for
an Ethernet connection and its MAC address for a WiFi connection in the allowed
list.
The access rule does not affect previously blocked or allowed devices. It applies
only to devices joining your network in the future after you apply these settings.
7. To allow the computer or device you’re currently using to continue to access the
network, select the check box next to your computer or device, and click the Allow
button.
User Manual40Control Access to the Internet
Orbi Whole Home Tri-Band Mesh WiFi 6 System
8. To view a list of allowed or blocked devices that are not connected, click one of the
following links:
•View list of allowed devices not currently connected to the network
•View list of blocked devices not currently connected to the network
The list displays.
9. Click the button.Apply
Your settings are saved.
Use keywords to block Internet sites
You can use keywords to block certain Internet sites from your network. You can use
blocking all the time or based on a schedule.
To block Internet sites:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Security > Block Sites
The Block Sites page displays.
5. Select a keyword blocking option:
•Per Schedule. Turn on keyword blocking according to a schedule that you set.
(See Schedule When to Block Internet Sites and Services on page 56.)
•Always. Turn on keyword blocking all the time, independent of the Schedule
page.
6. In the eld, enter a keyword or domain thatType keyword or domain name here
you want to block.
User Manual41Control Access to the Internet
Orbi Whole Home Tri-Band Mesh WiFi 6 System
For example:
•Specify XXX to block http://www.badstuff.com/xxx.html.
•Specify .com if you want to allow only sites with domain sufxes such as .edu or
.gov.
•Enter a period (.) to block all Internet browsing access.
7. Click the button.Add Keyword
The keyword is added to the keyword list. The keyword list supports up to 32 entries.
8. Click the button.Apply
Keyword blocking takes effect.
Delete keywords that are used to block
Internet sites
To delete keywords that are used to block Internet sites:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Security > Block Sites
The Block Sites page displays.
5. Do one of the following:
•To delete a single word, select it and click the button.Delete Keyword
The keyword is removed from the list.
•To delete all keywords on the list, click the button.Clear List
All keywords are removed from the list.
6. Click the button.Apply
User Manual42Control Access to the Internet
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Your settings are saved.
Avoid blocking on a trusted computer
You can exempt one trusted computer from blocking. The computer that you exempt
must be assigned a xed IP address. You can use the reserved IP address feature to
specify the IP address. See Manage reserved LAN IP addresses on page 63.
To specify a trusted computer:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Security > Block Sites
The Block Sites page displays.
5. Scroll down and select the checkAllow trusted IP address to visit blocked sites
box.
6. In the eld, enter the IP address of the trusted computer.Trusted IP Address
7. Click the button.Apply
Your settings are saved.
Block services from the Internet
You can block Internet services on your network based on the type of service. You can
block the services all the time or based on a schedule.
To block services:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
User Manual43Control Access to the Internet
Orbi Whole Home Tri-Band Mesh WiFi 6 System
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Security > Block Services
The Block Services page displays.
5. Specify when to block the services:
•To block the services all the time, select the radio button.Always
•To block the services based on a schedule, select the radio button.Per Schedule
For information about how to specify the schedule, see Schedule when to block
Internet sites and services on page 45.
6. Click the button.Add
The Block Services Setup page displays.
7. To add a service that is in the list, select the application or service.Service Type
The settings for this service automatically display in the elds.
8. To add a service or application that is not the list, select .User Dened
a. If you know that the application uses either TCP or UDP, select the appropriate
protocol.
Otherwise, select .TCP/UDP (both)
b. Enter the starting port and ending port numbers.
•If the service uses a single port number, enter that number in both elds.
•To find out which port numbers the service or application uses, you can contact
the publisher of the application, ask user groups or newsgroups, or search
on the Internet.
9. To specify how to lter the services, select one of the following radio buttons:
•Only This IP Address. Block services for a single computer.
•IP Address Range. Block services for a range of computers with consecutive IP
addresses on your network.
•All lP Addresses. Block services for all computers on your network.
10. Click the button.Add
User Manual44Control Access to the Internet
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Your settings are saved.
Manage network access control lists
You can use access control to block or allow access to your network.
To manage devices that are allowed or blocked:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter .orbilogin.com
A login window opens.
3. Enter the admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Security > Access Control
The Access Control page displays.
5. Select the check box.Turn on Access Control
6. Click the View list of allowed devices not currently connected to the network
link.
The list displays.
7. Select the check box for a device.
8. Use the button, button, and list button as needed.Add Edit Remove from the
9. Click the button.Apply
Your settings are saved.
Schedule when to block Internet sites and
services
When you schedule blocking, the same schedule is used to block sites and to block
services. For information about how to specify what you want the router to block, see
Use keywords to block Internet sites on page 41 and Avoid blocking on a trusted
computer on page 43.
User Manual45Control Access to the Internet
Orbi Whole Home Tri-Band Mesh WiFi 6 System
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Security > E-mail
The E-mail page displays.
5. Select the check box.Turn Email Notication On
6. In the field, enter the email address to which logs and alertsPrimary E-mail Address
are sent.
This email address is also used for the From address. If this eld is blank, log and
alert messages are not sent.
7. In the eld, enter the name of your ISP outgoing (SMTP)Your Outgoing Mail Server
mail server (such as mail.myISP.com).
You might be able to nd this information in the conguration window of your email
program. If you leave this eld blank, log and alert messages are not sent.
8. In the eld, enter your mail server’s portOutgoing Mail Server Port Number
number.
You might be able to nd this information in the conguration window of your email
program.
9. If your outgoing email server requires authentication, select the My Mail Server
requires authentication check box and do the following:
•In the eld, type the user name for the outgoing email server.User Name
•In the eld, type the password for the outgoing email server.Password
10. To send alerts immediately, select the check box.Send Alerts Immediately
Email alerts are sent immediately when someone attempts to visit a blocked site.
11. To send logs based on a schedule, specify these settings:
•From menu, select the schedule type.Send logs according to this schedule
•From the menu, select the day.Day
•From the menu, select the time, and select the or radio button.Time am pm
12. Click the button.Apply
Your settings are saved.
User Manual47Control Access to the Internet
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Termékspecifikációk
| Márka: | Netgear |
| Kategória: | router |
| Modell: | Orbi RBK752 |
Szüksége van segítségre?
Ha segítségre van szüksége Netgear Orbi RBK752, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók router Netgear
11 Október 2024
8 Október 2024
28 Szeptember 2024
18 Szeptember 2024
18 Szeptember 2024
18 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
8 Szeptember 2024
Útmutatók router
- router Samsung
- router Acer
- router Milwaukee
- router Bosch
- router AEG
- router StarTech.com
- router Einhell
- router Nokia
- router HP
- router Makita
- router BenQ
- router Apple
- router Ubiquiti Networks
- router Siemens
- router TP-Link
- router Medion
- router Motorola
- router Vimar
- router LogiLink
- router Alcatel
- router Roland
- router TCL
- router Digitus
- router Zebra
- router Xiaomi
- router TRENDnet
- router Mercusys
- router AVM
- router EZVIZ
- router Dell
- router Lancom
- router Strong
- router Gigabyte
- router Conceptronic
- router Thomson
- router Juniper
- router Kyocera
- router Hikvision
- router Keewifi
- router Vivanco
- router Huawei
- router Asus
- router Vtech
- router Hama
- router Zoom
- router Renkforce
- router Synology
- router Draytek
- router Iogear
- router Güde
- router Hitachi
- router Mikrotik
- router Toolcraft
- router ZyXEL
- router SPL
- router Dahua Technology
- router Smart-AVI
- router Black & Decker
- router Devolo
- router Planet
- router Tenda
- router BT
- router Black Box
- router MSI
- router Gembird
- router Cisco
- router PowerPlus
- router ATen
- router Google
- router Metabo
- router Bea-fon
- router ZTE
- router Edimax
- router Vodafone
- router ModeCom
- router HiKOKI
- router Foscam
- router Milan
- router Manhattan
- router Kogan
- router Festool
- router EnGenius
- router Sigma
- router Western Digital
- router D-Link
- router Media-Tech
- router Blustream
- router Milesight
- router Moxa
- router Sagem
- router Razer
- router Trust
- router Porter-Cable
- router Konig
- router Alfa
- router MuxLab
- router DeWalt
- router AVMATRIX
- router IFM
- router A-NeuVideo
- router Atlona
- router Schneider
- router AJA
- router Lindy
- router Cudy
- router Barco
- router QNAP
- router NEC
- router Silverline
- router Cotech
- router Siig
- router Gefen
- router Kathrein
- router Avenview
- router Lantronix
- router Technicolor
- router FSR
- router Topcom
- router Holzmann
- router Arris
- router Anker
- router I-TEC
- router Keenetic
- router Linksys
- router Teltonika
- router Sitecom
- router Intelix
- router Comprehensive
- router Ocean Matrix
- router Digitalinx
- router Alfatron
- router Belkin
- router RGBlink
- router Kopul
- router KanexPro
- router Key Digital
- router Kramer
- router BZBGear
- router UPC
- router Allnet
- router Allied Telesis
- router Airlive
- router Actiontec
- router Proximus
- router Skil
- router Eminent
- router Nilox
- router Sonos
- router Patton
- router Techly
- router Totolink
- router KPN
- router Netis
- router Envivo
- router Buffalo
- router Nest
- router LevelOne
- router ICIDU
- router Clas Ohlson
- router AT&T
- router Sweex
- router Aruba
- router Phicomm
- router Kasda
- router Jung
- router Digi
- router Verizon
- router Billion
- router T-Mobile
- router RAVPower
- router Hawking Technologies
- router Nexxt
- router Beafon
- router Kraun
- router LTS
- router Zolid
- router Sagemcom
- router Telstra
- router Eero
- router Advantech
- router Mercku
- router Hercules
- router Xantech
- router Intellinet
- router Arcadyan
- router Digiconnect
- router Ubee
- router SMC
- router Tele 2
- router Peak
- router CradlePoint
- router Davolink
- router Sixnet
- router 7inova
- router AVPro Edge
- router F-Secure
- router Rosewill
- router Digicom
- router Sabrent
- router On Networks
- router PENTAGRAM
- router Leoxsys
- router Readynet
- router OneAccess
- router Accelerated
- router Nexaira
- router Hamlet
- router Approx
- router T-com
- router Amped Wireless
- router Cambium Networks
- router 3Com
- router WyreStorm
- router Ruckus Wireless
- router Dovado
- router Mach Power
- router EXSYS
- router NetComm
- router Comtrend
- router Premiertek
- router GL.iNet
- router Shinybow
- router Edgewater
- router Atlantis Land
- router Lumantek
- router Starlink
- router PulseAudio
- router Predator
- router Evolution
- router Luxul
- router StarIink
- router Silentwind
- router Keezel
- router United Telecom
- router Wisetiger
Legújabb útmutatók router
9 Április 2025
9 Április 2025
9 Április 2025
31 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
23 Március 2025