Használati útmutató Netgear Nighthawk AX5400
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Netgear Nighthawk AX5400 (162 oldal) a router kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/162
User Manual
Nighthawk AX6
6-Stream AX4300 WiFi Router
Model RAX50
NETGEAR, Inc.
350 E. Plumeria DriveJune 2020
San Jose, CA 95134, USA202-12030-02
Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
Trademarks
©NETGEAR, Inc. NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc.
Any non-NETGEAR trademarks are used for reference purposes only.
2
Nighthawk AX6 6-Stream AX5400 WiFi Router
Contents
Chapter 1 Hardware Setup
Unpack your router...............................................................................9
Top panel LEDs and buttons.............................................................10
Rear panel............................................................................................12
Router label.........................................................................................13
Attach and position the antennas.....................................................13
Position your router............................................................................14
Wall-Mount Your Router....................................................................15
Cable your router...............................................................................16
Chapter 2 Connect to the Network and Access the Router
Connect to the network.....................................................................18
Connect to the network using a wired connection....................18
Find and connect to the WiFi network........................................18
WiFi connection using WPS..........................................................18
Types of logins....................................................................................19
Use a web browser to access the router..........................................19
Automatic Internet Setup..............................................................19
Log in to the router........................................................................21
Install and manage your router with the Nighthawk app..............21
Change the language........................................................................22
Chapter 3 Specify Your Internet Settings
Use the Internet Setup Wizard..........................................................24
Manually set up the Internet connection.........................................24
Specify an Internet connection without a login..........................24
Specify an Internet connection that uses a login.......................26
Specify IPv6 Internet connections....................................................27
Requirements for entering IPv6 addresses.................................28
Use auto detect for an IPv6 Internet connection........................28
Set up an IPv6 6to4 tunnel Internet connection.........................29
Set up an IPv6 pass-through Internet connection......................31
Set up an IPv6 fixed Internet connection....................................31
Set up an IPv6 DHCP Internet connection..................................33
Set up an IPv6 PPPoE Internet connection..................................34
Use auto config for an IPv6 Internet connection........................36
3
Set up an IPv6 6rd Internet connection.......................................37
Manage the MTU size.........................................................................39
MTU concepts.................................................................................39
Change the MTU size....................................................................40
Chapter 4 Control Access to the Internet
Enable access control to allow or block access to the Internet....43
Use keywords to block Internet sites...............................................44
Block services from the Internet.......................................................46
Delete keywords from the blocked list............................................47
Prevent blocking on a trusted computer.........................................47
Manage network access control lists...............................................48
Schedule when to block Internet sites and services......................49
Set up security event email notifications.........................................50
Chapter 5 Manage Network Settings
View or change the WAN settings....................................................53
Set up a default DMZ server..............................................................54
Change the Router’s Device Name..................................................55
Change the LAN TCP/IP settings......................................................55
Specify the IP addresses that the router assigns............................57
Disable the DHCP server feature in the router...............................58
Manage reserved LAN IP addresses................................................59
Reserve an IP address....................................................................59
Edit a reserved IP address............................................................60
Delete a reserved IP address entry..............................................60
Use the WPS Wizard for WiFi connections......................................61
Specify Basic WiFi Settings................................................................62
Change the WiFi mode......................................................................63
Change the WiFi mode if AX WiFi is enabled............................64
Change the WiFi mode if AX WiFi is disabled...........................65
Change the Transmission Power Control........................................66
Change the WiFi password or the WiFi security.............................67
Set up a guest WiFi network.............................................................68
Enable or disable the WiFi radios.....................................................70
Set up a WiFi schedule.......................................................................71
Specify WPS settings..........................................................................72
Set up the router as a WiFi access point..........................................73
Set up a bridge for a port group or VLAN tag group....................74
Set up a bridge for a port group..................................................74
Set up a bridge for a VLAN tag group........................................75
Set up an IPTV port........................................................................77
Manage custom static routes............................................................78
Set up a static route.......................................................................78
4
Nighthawk AX6 6-Stream AX5400 WiFi Router
Edit a static route...........................................................................79
Delete a static route.......................................................................80
Enable or disable implicit beamforming.........................................81
Enable or disable MU-MIMO............................................................81
Enable or disable AX WiFi.................................................................82
Enable bridge mode..........................................................................83
Chapter 6 Optimize Performance
Use Dynamic QoS to optimize Internet traffic management........86
Enable Dynamic QoS.....................................................................86
Enable or disable the automatic QoS database update...........87
Manually update the dynamic QoS database............................87
Improve network connections with Universal Plug and Play........88
Wi-Fi Multimedia Quality of Service.................................................89
Enable or disable AX WiFi.................................................................90
Chapter 7 Manage Your Router
Update the router firmware...............................................................93
Check for new firmware and update the router.........................93
Manually upload firmware to the router.....................................94
Change the admin password............................................................95
Enable admin password recovery....................................................95
Recover the admin password............................................................96
View information about the router and the Internet and WiFi
settings 97.................................................................................................
Display the statistics of the Internet port.........................................98
Check the Internet connection status..............................................99
View and manage logs of router activity.......................................100
View devices currently on the network..........................................101
Monitor Internet traffic.....................................................................101
Manage the router configuration file.............................................103
Back up the settings....................................................................103
Erase the settings.........................................................................103
Restore the settings.....................................................................104
Manage remote access....................................................................105
Set up remote management......................................................105
Use remote access.......................................................................106
Remotely access your router using the Nighthawk app..............106
Turn off the router LEDs..................................................................107
Set your time zone............................................................................107
Specify ReadyDLNA media server settings...................................109
Return the router to its factory default settings............................110
Use the Reset button...................................................................110
Erase the settings.........................................................................110
5
Nighthawk AX6 6-Stream AX5400 WiFi Router
Chapter 8 Share USB Storage Devices Attached to the Router
USB device requirements................................................................113
Connect a USB storage device to the router................................113
Access a storage device connected to the router from a
Windows-based computer..............................................................114
Map a USB device to a Windows network drive...........................114
Access a storage device that is connected to the router from a
Mac 115.....................................................................................................
Enable FTP access within your network.........................................116
View network folders on a storage device....................................116
Add a network folder on a USB storage device...........................117
Edit a network folder on a USB storage device............................118
Safely remove a USB storage device.............................................119
Chapter 9 Use Dynamic DNS to Access USB Storage Devices
Through the Internet
Set up and manage Dynamic DNS.................................................122
Set up FTP access through the Internet.........................................122
Your personal FTP server................................................................123
Set up your personal FTP server................................................123
Set up a new Dynamic DNS account.........................................124
Specify a DNS account that you already created.....................124
Change the Dynamic DNS settings...........................................125
Access USB storage devices through the Internet.......................126
Chapter 10 Use VPN to Access Your Network
Set up a VPN connection.................................................................128
Specify VPN Service in the Router..................................................128
Install OpenVPN Software...............................................................129
Install OpenVPN Software on Your Windows Computer.......129
Install OpenVPN Software on Your Mac Computer................132
Install OpenVPN Software on an iOS Device...........................133
Install OpenVPN Software on an Android Device...................133
Use a VPN Tunnel on Your Windows Computer..........................134
Use VPN to Access the Router’s USB Device and Media............136
Use VPN to Access Your Internet Service at Home......................136
Set Up VPN Client Internet Access in the Router.....................137
Block VPN Client Internet Access in the Router.......................137
Use a VPN Tunnel to Access Your Internet Service at Home..138
Chapter 11 Manage Port Forwarding and Port Triggering
Manage Port Forwarding to a Local Server..................................141
Set Up Port Forwarding to a Local Server.................................141
6
Nighthawk AX6 6-Stream AX5400 WiFi Router
Add a Custom Port Forwarding Service...................................142
Edit a Port Forwarding Service...................................................143
Delete a Port Forwarding Entry..................................................144
Application Example: Make a Local Web Server Public.........144
How the Router Implements the Port Forwarding Rule..........145
Port Triggering.................................................................................145
Add a Port Triggering Service....................................................146
Enable Port Triggering................................................................147
Application Example: Port Triggering for Internet Relay Chat port
triggering 147......................................................................................
Chapter 12 Troubleshooting
Quick tips...........................................................................................150
Sequence to restart your network.............................................150
Check the power adapter and Ethernet cable connections...150
Check the WiFi settings..............................................................150
Check the network settings........................................................150
Troubleshoot with the LEDs............................................................151
Standard LED behavior when the router is powered on........151
LEDs never turn off......................................................................151
Power LED is off or blinking.......................................................152
Internet or Ethernet LAN port LEDs are off..............................152
WiFi LED is off..............................................................................152
You cannot log in to the router.......................................................153
You cannot access the Internet.......................................................154
Troubleshoot Internet browsing.....................................................155
Changes are not saved....................................................................156
Troubleshoot WiFi connectivity......................................................156
Troubleshoot your network using the ping utility........................157
Test the LAN path to your router...............................................157
Test the path from a Windows-based computer to a remote
device 158............................................................................................
Chapter 13 Supplemental Information
Factory Settings................................................................................160
Technical Specifications..................................................................161
7
Nighthawk AX6 6-Stream AX5400 WiFi Router
1
Hardware Setup
This chapter contains the following sections:
• Unpack your router
• Top panel LEDs and buttons
• Rear panel
• Router label
• Attach and position the antennas
• Position your router
• Wall-Mount Your Router
• Cable your router
For more information about the topics covered in this manual, visit the support website
at netgear.com/support.
8
Unpack your router
Your package contains the router, the power adapter, four antennas, and an Ethernet
cable.
Figure 1. Package contents
User Manual9Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Top panel LEDs and buttons
The status LEDs and two buttons are located on the top panel of the router.
Figure 2. Top view
Table 1. LED descriptions
DescriptionLED and Button
•Solid white. The router is ready.
•Blinking white Reset. The router is not ready, firmware is upgrading, or the
button was pressed.
•Off. Power is not supplied to the router.
Power LED
•Solid white. The Internet connection is ready.
•Blinking white. The port is sending or receiving traffic.
•Off. No Ethernet cable is connected between the router and the modem.
Internet LED
User Manual10Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Table 1. LED descriptions (Continued)
DescriptionLED and Button
The LED color indicates the speed: white for Gigabit Ethernet connections and
amber for 100 Mbps or 10 Mbps Ethernet connections.
•Solid white. The router detected a 1 Gbps link with a powered-on device.
•Blinking white. The port is sending or receiving traffic at 1 Gbps.
•Solid amber. The router detected a 100 Mbps or 10 Mbps link with a
powered-on device.
•Blinking amber. The port is sending or receiving traffic at 100 Mbps or 10
Mbps.
•Off. No device is connected to this Ethernet port.
Ethernet LEDs for ports 1–4
•Solid white. A USB device is connected and is ready.
•Blinking white. A USB device is plugged in and is trying to connect.
•Off Safely Remove. No USB device is connected, or someone clicked the
Hardware button and it is now safe to remove the attached USB device.
USB 3.0 port LED
Pressing the WiFi button for two seconds turns WiFi LED and WiFi radios on and
off.
If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned
off and you cannot use WiFi to connect to the router.
WiFi LED
Pressing the WPS button lets your WPS-enabled device join your router's WiFi
network without typing the WiFi password. The WPS LED blinks white during
the WPS process and then lights solid white when the WPS-enabled device
connects to your router's WiFi network.
WPS LED
User Manual11Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Rear panel
The following figure shows the rear panel connectors and buttons.
1 2 4 5 63
Figure 3. Rear panel
The rear panel contains the following components:
1. . Pressing the button resets the router.Reset button Reset
If the button is pressed for at least 10 seconds and the Power LED blinks, theReset
router returns to its factory settings.
2. . Use the USB 3.0 port to connect USB storage device.USB 3.0 port
3. . Four Gigabit Ethernet RJ-45 LAN ports. Use these ports to connectEthernet ports
LAN devices to the router.
4. . One Gigabit Ethernet RJ-45 WAN port to connect the router to anInternet port
Internet modem such as a cable modem or DSL modem.
5. DC power connector. Connect the power adapter that came in the product package
to the DC power connector.
6. . Press the button to provide power to thePower On/Off button Power On/Off
router.
User Manual12Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Router label
The router label shows the login information, WiFi network name (SSID), password,
serial number, and MAC address.
Figure 4. Router label
Attach and position the antennas
Before you install your router, attach the antennas to the router.
Note: Make sure to match the labels on the antennas with the labels on the router. The
antennas must be attached to the correct antenna post on the router.
After you are done attaching the antennas, position the antennas as shown.
Figure 5. Attach and position the antennas
User Manual13Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Position your router
The router lets you access your network anywhere within the operating range of your
WiFi network. However, the operating distance or range of your WiFi connection can
vary significantly depending on the physical placement of your router.
In addition, position your router according to the following guidelines:
•Place your router near the center of the area where your computers and other devices
operate, and within line of sight to your WiFi devices.
•Make sure that the router is within reach of an AC power outlet and near Ethernet
cables for wired computers.
•Place the router in an elevated location, minimizing the number walls and ceilings
between the router and your other devices.
•Place the router away from electrical devices such as these:
- Ceiling fans
- Home security systems
- Microwaves
- Computers
- Base of a cordless phone
- 2.4 GHz or 5 GHz cordless phones
•Place the router away from large metal surfaces, large glass surfaces, insulated walls,
and items such as these:
- Solid metal door
- Aluminum studs
- Fish tanks
- Mirrors
- Brick
- Concrete
The following factors might limit the range of your WiFi:
•The thickness and number of walls the WiFi signal passes through can limit the range.
•Other WiFi access points in and around your home might affect your router’s signal.
WiFi access points are routers, repeaters, WiFi range extenders, and any other
devices that emit a WiFi signal for network access.
User Manual14Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Cable your router
Power on your router and connect it to a modem.
Figure 7. Cable your router
To cable your router:
1. Unplug your modem, remove and reinsert the backup battery if it uses one, and
then plug the modem back in.
2. Use the Ethernet cable to connect the modem to the yellow Internet port on the
router.
Note: If your Internet connection does not require a modem, connect your main
Ethernet cable to the yellow Internet port on the router.
3. Connect the power adapter to your router and plug the power adapter into an outlet.
4. Press the button on the rear panel of the router.Power On/Off
The router’s Power LED lights solid white when the router is ready.
User Manual16Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Connect to the network
You can connect to the router’s network through a wired or WiFi connection. If you set
up your computer to use a static IP address, change the settings so that it uses Dynamic
Host Conguration Protocol (DHCP).
Connect to the network using a wired connection
You can connect your computer to the router using an Ethernet cable and join the
router’s local area network (LAN).
To connect your computer to the router with an Ethernet cable:
1. Make sure that the router is receiving power (its Power LED is lit).
2. Connect an Ethernet cable to an Ethernet port on your computer.
3. Connect the other end of the Ethernet cable a LAN port on the router.
Your computer connects to the local area network (LAN).
Find and connect to the WiFi network
To nd and select the WiFi network:
1. Make sure that the router is receiving power (its Power LED is lit).
2. On your computer or WiFi device, nd and select the WiFi network.
The WiFi network name is on the router label.
3. Join the WiFi network and enter the WiFi password.
The password is on the router label.
Your device connects to the WiFi network.
WiFi connection using WPS
You can connect your WPS-enabled device to the router’s WiFi network with Wi-Fi
Protected Setup (WPS) or you can nd and select the WiFi network.
To use WPS to connect to the WiFi network:
1. Make sure that the router is receiving power (its Power LED is lit).
2. Check the WPS instructions for your WPS-enabled device.
3. Press the button on the router.WPS
User Manual18Connect to the Network and
Access the Router
Nighthawk AX6 6-Stream AX5400 WiFi Router
When your Internet service starts, your Internet service provider (ISP) typically gives you
all the information needed to connect to the Internet. For DSL service, you might need
the following information to set up your router:
•The ISP conguration information for your DSL account
•ISP login name and password
•Fixed or static IP address setting (special deployment by ISP; this setting is rare)
If you cannot locate this information, ask your ISP to provide it. When your Internet
connection is working, you no longer need to launch the ISP login program on your
computer to access the Internet. When you start an Internet application, your router
automatically logs you in.
The NETGEAR installation assistant runs on any device with a web browser. Installation
and basic setup takes about 15 minutes to complete.
To automatically set up your router:
1. Make sure that the router is powered on.
2. Make sure that your computer or mobile device is connected to the router with an
Ethernet cable (wired) or over WiFi with the preset security settings listed on the
label.
Note: If you want to change the router’s WiFi settings, use a wired connection to
avoid being disconnected when the new WiFi settings take effect.
3. Launch a web browser.
The page that displays depends on whether you accessed the router before:
•The rst time you set up the Internet connection for your router, the browser goes
to and the Conguring the Internet Connectionhttp://www.routerlogin.net
page displays.
•If you already set up the Internet connection, enter http://www.routerlogin.net
in the address eld for your browser to start the installation process.
4. Follow the onscreen instructions.
The router connects to the Internet.
5. If the browser does not display the NETGEAR installation assistant, do the following:
•Make sure that the computer is connected to one of the LAN Ethernet ports or
over WiFi to the router.
•Make sure that the router is receiving power and that its Power LED is lit.
•Close and reopen the browser or clear the browser cache.
•Browse to .http://www.routerlogin.net
User Manual20Connect to the Network and
Access the Router
Nighthawk AX6 6-Stream AX5400 WiFi Router
3
Specify Your Internet Settings
Usually, the quickest way to set up the router to use your Internet connection is to allow
your router to detect the Internet connection automatically when you rst access the
router web interface. You can also customize and manually specify your Internet settings.
This chapter contains the following sections:
• Use the Internet Setup Wizard
• Manually set up the Internet connection
• Specify IPv6 Internet connections
• Manage the MTU size
23
12. Click the button to test your Internet connection.Test
If the NETGEAR website does not display within one minute, see You cannot access
the Internet on page 154.
Specify an Internet connection that uses a login
To view or change the basic Internet setup:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter .http://www.routerlogin.net
A login window opens.
3. Enter the router admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .Internet
The Internet Setup page displays.
5. In the Does your Internet connection require a login? section, select the radioYes
button.
6. From the menu, select the encapsulation method: ,Internet Service Provider PPPoE
L2TP PPTP, or .
7. In the eld, enter the login name that your ISP gave you.Login
This login name is often an email address.
8. In the eld, type the password that you use to log in to your InternetPassword
service.
9. If your ISP requires a service name, type it in the eld.Service Name (if Required)
10. From the menu, select , , orConnection Mode Always On Dial on Demand Manually
Connect.
11. To change the number of minutes until the Internet login times out, in the Idle
Timeout (In minutes) eld, type the number of minutes.
This is how long the router keeps the Internet connection active when no one on the
network is using the Internet connection. A value of 0 (zero) means never log out.
12. Select an Internet IP Address radio button:
User Manual26Specify Your Internet Settings
Nighthawk AX6 6-Stream AX5400 WiFi Router
4. Select .ADVANCED > Advanced Setup > IPv6
The IPv6 page displays.
5. From the menu, select the IPv6 connection type:Internet Connection Type
•If you are not sure, select so that the router detects the IPv6 typeAuto Detect
that is in use.
•If your Internet connection does not use PPPoe or DHCP, or is not xed, but is
IPv6, select .Auto Cong
Your Internet service provider (ISP) can provide this information.
6. Click the button.Apply
Your settings are saved.
Requirements for entering IPv6 addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated
by colons. You can reduce any four-digit group of zeros within an IPv6 address to a
single zero or omit it. The following errors invalidate an IPv6 address:
•More than eight groups of hexadecimal quartets
•More than four hexadecimal characters in a quartet
•More than two colons in a row
Use auto detect for an IPv6 Internet connection
To set up an IPv6 Internet connection through autodetection:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter .http://www.routerlogin.net
A login window opens.
3. Enter the router admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Advanced Setup > IPv6
The IPv6 page displays.
5. From the menu, select .Internet Connection Type Auto Detect
The page adjusts.
User Manual28Specify Your Internet Settings
Nighthawk AX6 6-Stream AX5400 WiFi Router
Termékspecifikációk
| Márka: | Netgear |
| Kategória: | router |
| Modell: | Nighthawk AX5400 |
Szüksége van segítségre?
Ha segítségre van szüksége Netgear Nighthawk AX5400, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók router Netgear
11 Október 2024
8 Október 2024
28 Szeptember 2024
18 Szeptember 2024
18 Szeptember 2024
18 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
8 Szeptember 2024
Útmutatók router
- router Samsung
- router Acer
- router Milwaukee
- router Bosch
- router AEG
- router StarTech.com
- router Einhell
- router Nokia
- router HP
- router Makita
- router BenQ
- router Apple
- router Ubiquiti Networks
- router Siemens
- router TP-Link
- router Medion
- router Motorola
- router Vimar
- router LogiLink
- router Alcatel
- router Roland
- router TCL
- router Digitus
- router Zebra
- router Xiaomi
- router TRENDnet
- router Mercusys
- router AVM
- router EZVIZ
- router Dell
- router Lancom
- router Strong
- router Gigabyte
- router Conceptronic
- router Thomson
- router Juniper
- router Kyocera
- router Hikvision
- router Keewifi
- router Vivanco
- router Huawei
- router Asus
- router Vtech
- router Hama
- router Zoom
- router Renkforce
- router Synology
- router Draytek
- router Iogear
- router Güde
- router Hitachi
- router Mikrotik
- router Toolcraft
- router ZyXEL
- router SPL
- router Dahua Technology
- router Smart-AVI
- router Black & Decker
- router Devolo
- router Planet
- router Tenda
- router BT
- router Black Box
- router MSI
- router Gembird
- router Cisco
- router PowerPlus
- router ATen
- router Google
- router Metabo
- router Bea-fon
- router ZTE
- router Edimax
- router Vodafone
- router ModeCom
- router HiKOKI
- router Foscam
- router Milan
- router Manhattan
- router Kogan
- router Festool
- router EnGenius
- router Sigma
- router Western Digital
- router D-Link
- router Media-Tech
- router Blustream
- router Milesight
- router Moxa
- router Sagem
- router Razer
- router Trust
- router Porter-Cable
- router Konig
- router Alfa
- router MuxLab
- router DeWalt
- router AVMATRIX
- router IFM
- router A-NeuVideo
- router Atlona
- router Schneider
- router AJA
- router Lindy
- router Cudy
- router Barco
- router QNAP
- router NEC
- router Silverline
- router Cotech
- router Siig
- router Gefen
- router Kathrein
- router Avenview
- router Lantronix
- router Technicolor
- router FSR
- router Topcom
- router Holzmann
- router Arris
- router Anker
- router I-TEC
- router Keenetic
- router Linksys
- router Teltonika
- router Sitecom
- router Intelix
- router Comprehensive
- router Ocean Matrix
- router Digitalinx
- router Alfatron
- router Belkin
- router RGBlink
- router Kopul
- router KanexPro
- router Key Digital
- router Kramer
- router BZBGear
- router UPC
- router Allnet
- router Allied Telesis
- router Airlive
- router Proximus
- router Skil
- router Eminent
- router Nilox
- router Sonos
- router Patton
- router Techly
- router Totolink
- router KPN
- router Netis
- router Envivo
- router Buffalo
- router Nest
- router LevelOne
- router ICIDU
- router Clas Ohlson
- router AT&T
- router Sweex
- router Aruba
- router Phicomm
- router Kasda
- router Jung
- router Digi
- router Verizon
- router Billion
- router T-Mobile
- router RAVPower
- router Hawking Technologies
- router Nexxt
- router Beafon
- router Kraun
- router LTS
- router Zolid
- router Sagemcom
- router Telstra
- router Eero
- router Advantech
- router Mercku
- router Hercules
- router Xantech
- router Intellinet
- router Arcadyan
- router Digiconnect
- router Ubee
- router SMC
- router Tele 2
- router Peak
- router CradlePoint
- router Davolink
- router Sixnet
- router 7inova
- router AVPro Edge
- router F-Secure
- router Rosewill
- router Digicom
- router Sabrent
- router On Networks
- router PENTAGRAM
- router Leoxsys
- router Readynet
- router OneAccess
- router Accelerated
- router Nexaira
- router Hamlet
- router Approx
- router T-com
- router Amped Wireless
- router Cambium Networks
- router 3Com
- router WyreStorm
- router Ruckus Wireless
- router Dovado
- router Mach Power
- router EXSYS
- router NetComm
- router Comtrend
- router Premiertek
- router GL.iNet
- router Shinybow
- router Edgewater
- router Atlantis Land
- router Lumantek
- router Starlink
- router PulseAudio
- router Predator
- router Evolution
- router Luxul
- router StarIink
- router Silentwind
- router Keezel
- router United Telecom
- router Wisetiger
Legújabb útmutatók router
9 Április 2025
9 Április 2025
9 Április 2025
31 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
23 Március 2025