Használati útmutató Netgear GS752TPP

Netgear kapcsoló GS752TPP

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Netgear GS752TPP (115 oldal) a kapcsoló kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/115
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
September 2021
202-12021-06
User Manual
24-Port and 48-Port Gigabit Ethernet PoE+
Smart Switches with 4 SFP Ports
GS728TPv2
GS728TPPv2
GS752TPv2
GS752TPP
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
User Manual2
Support and Community
Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à
https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR's Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR's Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of
purchase within your return period.
Do not use this device outdoors. For products that support Power over Ethernet (PoE), the PoE source is intended
for intra building connection only.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz devices is prohibited on oil
platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while
flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or
communications with unmanned aircraft systems.
This switch is designed for indoor use only. If you want to connect to a device located outdoors, the outdoor device
must be properly grounded and surge protected, and you must install an Ethernet surge protector inline between
the switch and the outdoor device. Failure to do so can damage the switch.
WARNING: Before connecting this switch to outdoor cables or devices, see https://kb.netgear.com/000057103 for
safety and warranty information.
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.
Revision History
Publication
Part Number
Publish Date Comments
202-12021-06 September 2021 We removed “Managed Pro” from the product name.
202-12021-05 August 2021 We changed Configure the CoS settings for an interface on page 301.
202-12021-04 April 2021 • We changed Chapter 1, Get Started to document the following:
- The new device UI login options for initial access to the device UI. (HTTP
rather than HTTPS is now the default protocol for access to the device UI.)
See Access the switch on-network and connected to the Internet, Access
the switch off-network and not connected to the Internet, and
Credentials for the device UI.
- The new options to register the switch to activate your warranty. See
Register the switch.
- The new requirements to change the management mode. See
Change the
management mode of the switch.
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
User Manual3
(continued)
202-12021-04
(continued)
April 2021
(continued)
• We changed the login steps in all tasks in the manual to document the new
device UI login options.
• We changed Manage the Smart Control Center.
• We added Browser security warning with HTTPS access.
• We changed Reset the switch to factory default settings and reset the
registration status.
• We made multiple minor changes, including changes in terminology.
202-12021-03 March 2020 • We changed Reboot the switch.
• We changed Reset the switch to its factory default settings and added the
following sections:
- Reset the switch to factory default settings but maintain the registration
status.
- Reset the switch to factory default settings and reset the registration
status.
202-12021-02 February 2020 • We changed the login procedures for all tasks, including the tasks for initial
access in Chapter 1, Get Started. After you register and access the switch
with your NETGEAR account, you now can access the switch with the
device admin password. You now can also obtain and use a registration key
for oine access.
• We changed Credentials for the device UI.
• We changed Register the switch and added two sections:
- Register the switch with your NETGEAR account and access the switch
online
- Register the switch with your NETGEAR account and get a registration
key for offline access
• We changed Reset the switch to its factory default settings.
• We added Use an HTTP session to download and install an SSL security
certificate file on the switch.
• We changed local browser interface to device UI.
202-12021-01 August 2019 • We changed the login procedures for all tasks. After you register and access
the switch with your NETGEAR account, you can now access the switch with
the device admin password.
• The switch now supports management through the NETGEAR Insight app
and Insight Cloud portal.
• We reorganized the information in Chapter 1, Get Started and added or
revised the following sections:
- Available publications
- Switch management options and default management mode
- About on-network and off-network access
- Access the switch on-network and connected to the Internet
- Access the switch off-network and not connected to the Internet
- Credentials for the device UI
- Register the switch
- Change the language of the device UI
- Change the management mode of the switch
- PoE Max LED in the Device View
- LED Mode LED in the Device View

Termékspecifikációk

Márka: Netgear
Kategória: kapcsoló
Modell: GS752TPP

Szüksége van segítségre?

Ha segítségre van szüksége Netgear GS752TPP, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók kapcsoló Netgear

Netgear

Netgear GS724Tv6 Útmutató

4 Január 2025
Netgear

Netgear GS110TPP Útmutató

15 Október 2024
Netgear

Netgear GS324 Útmutató

23 Szeptember 2024
Netgear

Netgear ProSafe GS108Ev3 Útmutató

24 Augusztus 2024
Netgear

Netgear GSS108EPP Útmutató

20 Augusztus 2024
Netgear

Netgear GS308E Útmutató

16 Augusztus 2024
Netgear

Netgear GS308 Útmutató

12 Augusztus 2024
Netgear

Netgear GS108PE Útmutató

11 Augusztus 2024
Netgear

Netgear JGS524PE Útmutató

8 Augusztus 2024
Netgear

Netgear GS516PP Útmutató

7 Augusztus 2024

Útmutatók kapcsoló

Legújabb útmutatók kapcsoló

Tork

Tork SS700ZA Útmutató

9 Április 2025
Cudy

Cudy FS1024 Útmutató

9 Április 2025
Lancom

Lancom GS-2412 Útmutató

5 Április 2025
Lancom

Lancom GS-2412P Útmutató

5 Április 2025
Lancom

Lancom GS-2426 Útmutató

5 Április 2025
Lancom

Lancom GS-2426P Útmutató

5 Április 2025
Hager

Hager ARF970D Útmutató

3 Április 2025
Hager

Hager ARF920D Útmutató

3 Április 2025
Fantini Cosmi

Fantini Cosmi B12BN Útmutató

2 Április 2025
Fantini Cosmi

Fantini Cosmi B12DN Útmutató

2 Április 2025