Használati útmutató Netgear GS724Tv6

Netgear kapcsoló GS724Tv6

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Netgear GS724Tv6 (2 oldal) a kapcsoló kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
Installation Guide
24-Port Gigabit Ethernet Smart Switch with 2
Dedicated SFP Ports
GS724Tv6
Step 1. Connect the switch
A1: Use the NETGEAR Insight app to discover and register the switch
1. If you did not yet install the Insight app, visit the app store on your mobile device,
search for NETGEAR Insight, and download the Insight app.
2. Open the Insight app, enter the email address and password for your NETGEAR
account, and tap .LOG IN
3. Use one of the following methods to add and discover the switch:
• Method 1: Your switch and mobile device are connected to the same network
Your switch and its IP address display in the Devices list. Do the following:
a. Select the switch or tap .Unclaimed
b. On the next screen, tap .ADD DEVICE
1. Connect devices to the RJ-45 Gigabit ports on the switch front panel.
Use Category 5e (Cat 5e) or higher rated Ethernet cables terminated with RJ-45
connectors to make connections.
2. Connect one port on the switch to a network that includes a DHCP server such as a
router.
NOTE: Inasmallofceorhomeofcenetwork,connecttheswitchtotheLANport
of a router that is connected to a modem, or to a gateway.
To use an SFP port, you must insert an SFP transceiver module, which you can
purchase from NETGEAR
3. Power on the switch and wait three minutes.
If you connected the switch to a network with a DHCP server, the switch is
automatically assigned a new IP address. (The default switch IP address is
192.168.0.239.)
Package contents
• Switch model GS724Tv6 or GS748Tv6
• Power cord (varies by region)
• Rack-mount kit and rubber feet
• Installation Guide
This switch is designed for indoor use only. If you want to connect it to a device located
outdoors, the outdoor device must be properly grounded and surge protected, and
you must install an Ethernet surge protector inline between the switch and the outdoor
device. Failure to do so can damage the switch.
December 2023 WARNING: Before connecting this switch to outdoor cables or devices, see
https://kb.netgear.com/000057103 for safety and warranty information.
Sample connections
48-Port Gigabit Ethernet Smart Switch With 2
Copper/SFP Combo Ports and 2 Dedicated SFP Ports
GS748Tv6
Step 2: Discover the switch in your network
Use one of two options to discover and manage the switch: Add the switch to a NETGEAR
Insight managed network, or set it up as a locally managed standalone switch. Follow the
procedure for your preferred network setup.
Insight setup Option A: Use the NETGEAR Insight app
Insight subscribers can use the Insight app for onsite discovery.
Standalone setup Option B: Use the NETGEAR Switch Discovery Tool
Use the NETGEAR Switch Discovery Tool.
Option A: Use the NETGEAR Insight app
This procedure assumes that you are already a NETGEAR Insight subscriber and want to
add the switch to an Insight managed network behind a router.
You can use the Insight app on a mobile device and scan the QR code or bar code to add
the switch to Insight, or use the Insight Cloud Portal to manually enter the switch’s serial
number and MAC address. This procedure describes how to use the Insight app.
After you discover and add the switch to the Netgear Insight app, we recommend that
you connect a computer directly to the switch or to the network on which you installed the
switch to complete set up. If you connect an access point to the switch, you can also use a
tablet to connect to the switch.
A2: Change the switch management mode to NETGEAR Insight
By default, the management mode of the switch is set to Directly Connect to Web Browser
Interface, which lets you manage the switch from its device user interface (UI). To manage
the switch remotely from the cloud with the NETGEAR Insight Cloud Portal or Insight app,
you must change the management mode in the device UI.
1. Open a web browser from a computer or tablet connected to the same network as
your switch.
You can use a wired or WiFi connection.
2. Intheaddresseldofyourwebbrowser,typetheIPaddressoftheswitch.
The switch IP address displays in the Devices list of the Insight app (see
A1: Use the NETGEAR Insight app to discover and register the switch).
Because you already registered the switch with NETGEAR, the device UI login page
displays.
3. Enter the default device admin password, which is , and click the password Login
button.
If you already added the switch to an Insight network location, enter the Insight
network password for the network location.
4. IftheChangeDefaultPasswordpagedisplays,setandconrmanewdeviceadmin
password, click the button, and log in again using your new password Apply
The System Information page displays.
Continue on the next page
CAUTION: If you add the switch to Insight before connecting it to power for the
rsttime,wait10minutestoallowthedefaultlogincredentialstobereplacedby
the Insight network location credentials.
If the switch does not display in the devices list, tap in the upper-right corner, +
and tap . If the switch still does not display, use Method 2.Scan Network
• Method 2: Your switch and mobile device are not connected to the same
network
Your switch and its IP address do not display in the devices list. Do the following:
a. Tap in the upper-right corner.+
b. Either use the camera on your mobile device to scan the bar code or QR
code, or type in the serial number and MAC address.
4. Followtheonscreenpromptstonishregisteringtheswitch.
5. If you want to manage the switch with NETGEAR Insight, do the following:
At the NETGEAR Insight Cloud Portal or Insightapp prompt, tap Manage with
Insight. Then, continue with
A2: Change the switch management mode to NETGEAR Insight.
Servers
Storage
Desktops
Router
Insight cloud
Internet
Access point
WiFi clients
GS724Tv6 switch
Access point
WiFi clients with
Insight access
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à netgear.com/support/download/. (If this product is sold in Canada, you can
access this document in Canadian French at netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity,
visit netgear.com/about/regulatory/. See the regulatory compliance document before
connecting the power supply.
For NETGEAR’s Privacy Policy, visit
netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at netgear.
com/about/terms-and-conditions. If you do not agree, return the device to your place of
purchase within your return period.
Do not use this device outdoors.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz
devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation
ofthisdeviceispermittedinlargeaircraftwhileyingabove10,000feet.Operationof
transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications
with unmanned aircraft systems.
©NETGEAR,Inc.,NETGEARandtheNETGEARLogoaretrademarksofNETGEAR,Inc.
Any non-NETGEAR trademarks are used for reference purposes only.
NETGEAR INTERNATIONAL LTD
Floor 6, Penrose Two,
Penrose Dock, Cork, T23 YY09, Ireland
Option B: Use the NETGEAR Switch Discovery Tool
You can use the NETGEAR Switch Discovery Tool on a Mac or Windows-based computer
connected to the same network as the switch to discover the switch IP address in your
network. To download this tool, visit
netgear.com/support/product/netgear-switch-discovery-tool.aspx.
After discovering the IP address of your switch, continue with
Standalonesetup:LogintotheswitchdeviceUI.
Standalone setup: Log in to the switch device UI
You can use the switch as a plug-and-play device or you can change the settings by
logging in to the device user interface (UI).
1. Open a web browser from a computer or tablet connected to the same network as
your switch. You can use a wired or WiFi connection.
2. Intheaddresseldofyourwebbrowser,typetheswitchIPaddress.
To discover the IP address of the switch, see
Option B: Use the NETGEAR Switch Discovery Tool.
You can also use the NETGEAR Insight app the discover the switch IP address only
(see A1: Use the NETGEAR Insight app to discover and register the switch).
The login page displays
3. Enter the default device admin password, which is , and click the password Login
button.
If you already added the switch to an Insight network location, enter the Insight
network password for the network location.
5. Select the NETGEAR Insight Mobile App and Insight Cloud Portal radio button.
6. In the pop-up window, click the button.OK
7. Click the button.Apply
8. In the pop-up window, click the button.OK
Your settings are saved.
You now must manage the switch using the NETGEAR Insight Cloud Portal or Insight app.
We recommend that you use the Insight Cloud Portal.
NOTE: You can still log in to the device UI and access a limited menu, but instead
of the device admin password, you now must enter the Insight network password
for the Insight network location to which you added the switch.
4. IftheChangeDefaultPasswordpagedisplays,setandconrmanewdeviceadmin
password, click the button, and log in again using your new password.Apply
The System Information page displays. You can now manage the switch.
For more information about managing the switch from the device UI, see the user
manual, which you can download by visiting www.netgear.com/support/download
and entering your model number.
If you did not yet register your switch, we recommend that you visit my.NETGEAR.com,
and register your switch.

Termékspecifikációk

Márka: Netgear
Kategória: kapcsoló
Modell: GS724Tv6

Szüksége van segítségre?

Ha segítségre van szüksége Netgear GS724Tv6, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók kapcsoló Netgear

Netgear

Netgear GS724Tv6 Útmutató

4 Január 2025
Netgear

Netgear GS110TPP Útmutató

15 Október 2024
Netgear

Netgear GS324 Útmutató

23 Szeptember 2024
Netgear

Netgear ProSafe GS108Ev3 Útmutató

24 Augusztus 2024
Netgear

Netgear GSS108EPP Útmutató

20 Augusztus 2024
Netgear

Netgear GS308E Útmutató

16 Augusztus 2024
Netgear

Netgear GS308 Útmutató

12 Augusztus 2024
Netgear

Netgear GS108PE Útmutató

11 Augusztus 2024
Netgear

Netgear JGS524PE Útmutató

8 Augusztus 2024
Netgear

Netgear GS516PP Útmutató

7 Augusztus 2024

Útmutatók kapcsoló

Legújabb útmutatók kapcsoló

D-Link

D-Link DGS-1100-05PD Útmutató

6 Január 2025
D-Link

D-Link DGS-1100-10MP Útmutató

6 Január 2025
D-Link

D-Link DGS-1510-28 Útmutató

6 Január 2025
D-Link

D-Link DGS-1210-20 Útmutató

6 Január 2025
D-Link

D-Link DGS-1100-05 Útmutató

6 Január 2025
DoorBird

DoorBird A1091 Útmutató

5 Január 2025
Vemer

Vemer micro BT Útmutató

4 Január 2025
Suevia

Suevia DigiPro Útmutató

4 Január 2025
QNAP

QNAP QSW-IM3216-8S8T Útmutató

3 Január 2025
Roline

Roline 14.01.3045 Útmutató

3 Január 2025