Használati útmutató Neewer AS600B

Neewer Lampa AS600B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Neewer AS600B (1 oldal) a Lampa kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/1
Product Illustration
02
Product Illustration
1. Do not stare directly at the light to avoid eye damage.
2. Do not modify or dismantle the electrical wires to prevent
injury.
3. Do not modify the circuit board or disassemble the
product.
4. Use the provided power cord or an approved alternative
to ensure safety.
5. Avoid using alcohol or liquid cleaners on the product to
prevent damage.
6. Do not subject the product to any form of physical impact.
7. Avoid prolonged exposure to sunlight.
8. Unplug the power cable when not in use.
9. Use a soft cloth to clean the product.
10. Failure to comply with these guidelines will void the
warranty.
Model
Color Temperature
Brightness
Color Rendering Index (CRI)
AS600B
2700-6500K
0.0%-100%
CRI≥96, TLCI≥98
Handle
Lamp Body
Connector
Port
Angle Adjustment
Lever
Support
Heat Dissipation
Vents Release Button
Bowens Mount
LED Beads
U Shaped Bracket
Support Fixing Knob
01
EN EN
0403
EN EN
0605
EN EN
0807
EN EN
09
EN
Safety Instructions
Installation Instructions Installation Instructions
Package Contents
1 x Studio Light
1 x Carrying
Case
1 x Reflective Hood 1 x Lamp Head
Protective Cover
1 x User Manual
1 x Connection
Cable
1 x Super
Clamp
1 x Power Cord
1 x Steel
Wire Rope
1 x Control Box
Display Screen
Power
Switch
MENU Button
MODE Button
Lamp Body
Connector
Port
DMX Input Port
DMX Output Port
DC IN AC IN
② Installing the
Reflective Hood:
Align the tabs on the
reflective hood with the
slots on the lamp body,
then rotate the reflective
hood clockwise until you
hear a 'click' sound,
indicating it's securely
installed.
① Removing the Plastic
Protective Cover:
Press the release button
located on the top of the
body of the lamp, then
rotate the protective
cover counterclockwise
to remove it.
④ Installing on the Light
Stand:
Insert the top of the light
stand into the mounting
hole at the bottom of the
support piece, then rotate
the support's fixing knob
clockwise to secure.
③ Removing the
Reflective Hood:
Press the release button
located on the top of the
body of the lamp, then
rotate the reflective hood
counterclockwise to
remove it.
⑤ Removing the Light Stand:
Simply rotate the support's
fixing knob counterclockwise
to loosen and remove from
the light stand.
Using the Product Using the Product
Using the Product Using the Product Using the Product
Using the Product Using the Product
Specifications Safety Precautions
Battery warning
Source Matching Mode
Power Supply： Power On/Off & Fan Mode：
Press and hold the power
button to turn the device on
or off.
Short press the power button
to toggle between fan modes:
auto mode, high speed mode,
medium speed mode, and
silent mode.
Start by connecting the power cord to the electrical outlet
and the AC input interface on the control box.
Then, use the connection cable to establish a link between
the control box and the lamp head connector port on the
lamp body.
The control box includes a standard
V lock plate for the V mount battery
power supply.
It supports 14.8V/26V batteries, with
a current greater than 10A.
Note: Batteries are not included and
must be purchased separately!
Special Effects Scene Types：
Fireworks
Menu Customization Mode:
Press the MENU button briefly
to enter or exit the custom
menu.
Rotate the SET button to
customize different modes.
Candlelight
Lightning
CCT
Pulse
CCT Loop INT Loop
Paparazzi Defective
Bulb
Explosion Welding CCT Flash
TV Screen
F01
F08 F09 F10 F11 F1 2
F02 F03 F04 F05 F06
F07
SET Button
Press the MODE button briefly
to enter CCT mode. Press the
SET button briefly to select
brightness adjustment, then
rotate it to adjust brightness
from 0% to 100%.
CCT/Brightness Adjustment：
CCT/Color Temperature
Adjustment：
Press the SET button briefly to
switch to color temperature
adjustment mode. Rotate the
SET button to adjust the color
temperature value, then press
the SET button briefly to exit.
Press the MODE button briefly
to select "OUTPUT MODE", then
press the SET button briefly to
confirm.
Rotate the SET button to toggle
between CL (Constant Brightness
Mode) / CP (Maximum Power
Output Mode).
Brightness Output Mode：
Press the MODE button briefly
to enter FX mode.
Rotate the SET button to select
special effects from F01 to F12.
FX/Special Effects Scenes：
For your safety and that of others, please carefully review
the following safety guidelines before using this product.
Pay close attention to the highlighted safety precautions
in this manual, and always inspect the equipment before
use, avoiding the use of any damaged parts.
※ Do not place flammable materials near the studio light.
※ Do not use in rainy, damp, or other adverse weather
conditions.
※ Use a hairdryer brush or clean thin paper to remove
dust and moisture.
※ Keep this product out of reach of children and pets.
※ Avoid prolonged exposure of this product to direct
sunlight.
※ Do not store this product in direct sunlight.
※ Turn off and disconnect the power before maintenance.
The device should be powered off when installing or
removing accessories.
※ Avoid obstructing or covering the ventilation holes
during operation.
※ Do not use chemical agents or liquid to clean this
product.
※ Do not submerge any part of this product in liquid.
※ Do not attempt to disassemble or repair this product
by yourself.
※ The studio light may become hot during use. Do not
touch affected parts with bare hands.
In 2.4G mode, rotate the SET
button to select "2.4G CHANNEL",
then press the SET button briefly
to confirm.
Rotate the SET button to switch
between channels 0 to 99, then
press the SET button briefly to
exit.
2.4G Mode：
Infinity / 2.4G Mode：
Briefly press the MENU button to
enter the menu, then rotate the
SET button to select "INFINITY
MODE", and press the SET button
to confirm.
Rotate the SET button to choose
between Bluetooth or 2.4G mode,
then press the SET button briefly
to confirm.
Note: Connect your mobile phone's Bluetooth to control the LED
light via the NEEWER app. Scan the QR code on the "APP Prompt
Card" for operating instructions.
Note: Once Studio Mode is activated, the product will automatically
enter Studio Mode the next time it's powered on, without the need
for further setup.
Briefly press the MENU button
to enter the menu, then rotate
the SET button to select
"DIMMING CURVE", and press
the SET button to confirm.
Dimming Curve：
Dimming Curve Types：
Briefly press the MENU button to
enter the menu, then rotate the
SET button to select "INFINITY
RESET", and press the SET
button briefly to open the dialog
box. Select "YES" to complete
the reset.
Bluetooth Reset：
INFINIYT RESET
INT
OUTPUT MODE
Press the MODE button briefly
to select "STUDIO MODE", then
press the SET button briefly to
confirm.
Rotate the SET button to select
"ON".
Studio Mode：
OUTPUT MODE
Short press the MODE button
to select "RESET ALL SETTINGS",
then press SET to open the
dialog box. Select "YES" to
complete the reset.
Factory Reset：
RESET ALL SETTINGS
Briefly press the MODE button to
select "DMX", then press the SET
button briefly to confirm.
Rotate the SET button to choose
between ON/OFF.
DMX Mode：
DMX
With DMX mode on, rotate the
SET button to select "DMX
ADDRESS", then press the SET
button briefly to confirm.
Rotate the SET button to choose
the DMX address.
DMX Address：
DMX ADDRESS
5000K
DIMMIN G CURVE
Exp SLog Linear
INFINITY MODE
2.4G
2.4G CHANNEL
MODE Button:
Press the MODE button briefly to
toggle between built in modes:
CCT, FX, SOURCE MATCHING,
and FAVORITE mode.
Press and hold the MODE button
to lock all buttons. After doing
so, no operation will be possible.
Press and hold the MODE button
again to unlock.
Rotate the SET button to
choose the curve type; there
are a total of 4 types available.
1. Do not attempt to detach, modify, and repair the battery
by yourself. Any unauthorized operation may cause battery
leakage, overheating, burning, and other hazards.
2. Be sure to use the provided or certified chargers to
prevent overcharging and shortcuts.
3. If unusual charging speed and indicator flashing occur,
please stop charging and contact our customer service .
4. Keep away from inflammable and explosive items.
Lamp Body: 5kg (±10%)
Control Box: 3.74kg
Special Effects Modes
Input Power
Input Voltage
Output Power
Weight
12
720W
AC100-240V, DC48V/15A
600W
Max Illuminance
(light-intensifying reflector)
Max Illuminance
(Standard diffuseur) 99000lx (1m)
200000lx (1m)
Dawn
Daytime
Daylight
Incandescent Lamp
Video Lamp
Modeling Lamp
Dysprosium Lamp
Daylight Dysprosium Lamp
Warm White Halogen Lamp
White Halogen Lamp
Xenon Short-Arc Lamp
5000K
5500K
6500K
3200K
3300K
3400K
5600K
6000K
2700K
4300K
6200K
* The light-intensifying reflector is sold separately.

Termékspecifikációk

Márka: Neewer
Kategória: Lampa
Modell: AS600B

Szüksége van segítségre?

Ha segítségre van szüksége Neewer AS600B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Lampa Neewer

Neewer

Neewer FS230 Útmutató

2 Szeptember 2024
Neewer

Neewer FS230B Útmutató

2 Szeptember 2024
Neewer

Neewer CSF10 Útmutató

2 Szeptember 2024
Neewer

Neewer AS600B Útmutató

2 Szeptember 2024

Útmutatók Lampa

Legújabb útmutatók Lampa

Theben

Theben theLeda B10L Útmutató

8 Április 2025
Theben

Theben theLeda P24L Útmutató

8 Április 2025
NUVO

NUVO Arabel 60/6967 Útmutató

5 Április 2025
NUVO

NUVO Gotham 60/191 Útmutató

5 Április 2025
NUVO

NUVO Cordello 60/7884 Útmutató

5 Április 2025
NUVO

NUVO Clarksville 60/8061 Útmutató

5 Április 2025
NUVO

NUVO Gotham 60/190 Útmutató

5 Április 2025
V-TAC

V-TAC VT-407 Útmutató

5 Április 2025
V-TAC

V-TAC VT-415 Útmutató

5 Április 2025
Cateye

Cateye Nano60 TL-LD830 Útmutató

5 Április 2025