Használati útmutató Neets Bravo

Neets távirányító Bravo

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Neets Bravo (12 oldal) a távirányító kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
Neets Control – BraVo
Installation Manual
Page 2 of 12
Foreword
The purpose of this document is to describe how to install and configure the
Neets Control – BraVo DK and EU models.
COPYRIGHT - All information contained in this manual is the intellectual property of and
copyrighted material of Neets. All rights are reserved. You may not allow any third party access
to content, information or data in this manual without Neets’ express written consent.
CHANGES - Neets reserve the right to change the specification and functions of this product
without any notice.
Questions, AFTER reading this manual, can be addressed to your local dealer or:
Neets
by E-Mail: Support@Neets.dk
or you may use our contact form at www.neets.dk
Revision list
Author: Date Description Pages Rev
TSA 07/03-2012 First release All 1.00
MH:09-07-2015 New design All 2.00
What is in the box?
When you open the box it will contain the following items:
BraVo, DK
1 x Neets Control - BraVo
1 x 12V wall plug PSU
Terminal connectors
1 x Front cover
1 x Paper cover
BraVo, EU
1 x Neets Control - BraVo
1 x 12V wall plug PSU
Terminal connectors
1 x Front cover
1 x Paper cover
Metal plate
2 x screws for metal plate
Page 3 of 12
Important Safety Instructions
Caution:
Read these instructions:
Read and understand all safety and operating instructions before using the equipment.
Keep these Instructions:
The safety instructions should be kept for future reference.
Heed all Warnings:
Follow all warnings and instructions marked on the equipment or in the user information.
Avoid Attachments:
Do not use tools or attachments that are not recommended, because they may be hazardous
Warning!:
• This equipment should be operated only from the included power supply.
• To remove power from the equipment safely, remove all power cords from the rear of the equipment, or the
desktop power module (if detachable), or from the power source receptacle (wall plug).
• Power cords should be routed so that they are not likely to be stepped on or pinched by items placed upon or
against them.
• Do not defeat the safety purpose of a polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualied service personnel. There are no user-serviceable parts inside. To prevent the risk of
shock, do not attempt to service this equipment yourself because opening or removing covers may expose you to
dangerous voltage or other hazards. Contact your local Neets reseller or distributor.
• If the equipment has slots or holes in the enclosure, these are provided to prevent overheating of sensitive
components inside. These openings must never be blocked by other objects.
• Do not use this equipment near water.
• To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture and objects lled
with liquids.
• Unplug the product before cleaning. Clean only with a dry cloth and not cleaning uid or aerosols. Such products
could enter the unit and cause damage, re, or electric shock. Some substances may also mar the nish of the
product.
FCC Class A Notice:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
The Class A limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own expense.
FCC regulations state that any unauthorized changes or modications to this equipment, not expressly approved by
the manufacturer, could void the user’s authority to operate this equipment.
The lightning bolt triangle is used to alert the user to the presence of uninsulated “dangerous
voltages” within the unit’s chassis that may be of sufcient magnitude to constitute a risk of electric
shock to humans.
The exclamation point triangle is used to alert the user to presence of important operating and
service instructions in the literature accompanying the product.
!

Termékspecifikációk

Márka: Neets
Kategória: távirányító
Modell: Bravo

Szüksége van segítségre?

Ha segítségre van szüksége Neets Bravo, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók távirányító Neets

Neets

Neets OsCar, EU Útmutató

7 Augusztus 2024
Neets

Neets Bravo Útmutató

7 Augusztus 2024
Neets

Neets Echo Útmutató

7 Augusztus 2024

Útmutatók távirányító

Legújabb útmutatók távirányító

Nanlite

Nanlite BT-BCS-48V3.5mm Útmutató

22 December 2024
Pentatech

Pentatech 3000R Útmutató

21 December 2024
SMK-Link

SMK-Link VP3700 Útmutató

19 December 2024
Metronic

Metronic ZAP 2 Unic - 495399 Útmutató

19 December 2024
Metronic

Metronic ZAP 3 - 495373 Útmutató

19 December 2024
Metronic

Metronic ZAP 3 - 495309 Útmutató

19 December 2024
Metronic

Metronic ZAP 3 - 495308 Útmutató

19 December 2024
Metronic

Metronic 495390 Útmutató

19 December 2024
Metronic

Metronic 495387 ZAP 3 Útmutató

19 December 2024
Metronic

Metronic ZAP 6 Útmutató

18 December 2024