Használati útmutató Nedis AHDR208CBK

Nedis Hangrögzítő AHDR208CBK

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Nedis AHDR208CBK (46 oldal) a Hangrögzítő kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/46
User manual
AHDR20 CBK8
Main Board Sensor Industrial Embedded Microprocessor
Operating System Embedded LINUX operating system
Signal Support AHD, IPC, CVBS, TVI, CVI (5 in 1)
Video Coding H.264
Video Format 4CH / 8CH 1080p
Video Frame PAL: 1 - 25 FPS / NTSC: 1 - 30 FPS
Double Stream Support
Interface USB Port (2x), RS485, SATA HDD (max 8 GB), VGA, HDMI, CVBS,
BNC (4x / 8x), RCA input, RCA output
Recording Mode Automatic / Manual / Scheduled / Motion Detection / Alarm Recording
Recording Resolution Self-adaption
Playback 4CH 1080p
Playback Mode Instant / Search / Event
Backup Mode USB / Network
Protocol Support TCP/IP, UDP, PPPoE, DHCP, DDNS, NTP etc.
P2P Cloud N_EYE Pro APP / www.yunyis.com
Supported access Mobile App (iOS / Android), UTC control, 3G, WIFI
Power 12 VDC
Power Consumption < 15W (no HDD)
Operating conditions -10 - 55 °C / 10 - 90% humidity
Phyiscal 255 x 215 x 45 mm / < 1,5 KG (no HDD)
Sensor
System
Recording
Manage
Network
Power
Others
Figure Figure "A" "B"
Figure "C"
2
English
1. Connect
- Connect the cameras to the recorder with the coaxial cables using BNC connector
- Use the power splitter to power the cameras
- Connect the DVR to a TV or monitor using the preferred connector
- Connect the mouse using USB
- Connect the recorder to the internet using an Ethernet cable (if desired)
- Finally power up the recorder with the included power adapter.
2. Start Up
Press the start button and make sure the TV/monitor is set to the right input source. It will enter the real-time monitoring screen as
shown in gure : "A"
3. Navigation
Right-click anywhere to access the “Right-click menu”.
At rst attempt login is required, default username is admin, default password is 123456
Use the left mouse button to navigate through the menu, right click in the menu to go back.
4. Shutdown
- Right-click anywhere to access the “Right-click menu”, choose “Shut down system” and “Close”, or
- Long press the startup button at the front panel (not recommended as it may damage the hard disk)
5. Recovery
At sudden system power o, the recording video will be stored automatically and after reboot, the recorder will automatically
resume to the status before power o.
6. Recording
In the Record Cong menu you can set each camera’s recording schedule. By selecting the preferred recording mode and clicking
individual timeslots or dragging to set a larger timezone or to cover multiple days at once.
White means that no recording will be done in this timeslot, blue means constant recording is done and green means that
recording will only happen after motion is being detected.
After a schedule is nished, it can easily be copied to one or more cameras. See gure "B"
7. Motion detection
In right-click menu - main menu - system settings - output mode the motion detection can be enabled and dierent settings can
be set:
- 3 dierent sensitivity settings
- exact action(s) to take: Record one or more channels, take snapshot, send Email or show triggered camera fullscreen.
- Area setting (motion mask): if set only motion in the highlighted areas trigger the set action(s).
8. Playback
When watching back earlier recordings, you get the interface like gure :"C"
The 4 grey timelines at the bottom represent the 4 dierent channels. Dierently coloured areas indicate dierent types of
recording (scheduled, manual, alarm or triggered by motion detection).
Drag the timeline left or right to scroll in time, use the mouse’s scroll-wheel to zoom the timeline.
Double click on a specic time to play back the recording starting from the selected time.
9. Mobile Application
To access the DVR on your smartphone make sure the DVR is connected to the router and the network is congured correctly.
Download and open the App “N_EYE PRO”, login or register your account or use local login if you only need access from within
the local network. Add device using the plus sign and select Network Device. Scan the QR-tag shown at the DVR under P2P Cloud
or copy the requested network parameters. The App can automatically detect the number of cameras on this DVR. After saving you
will see all cameras added. On the top-right corner specic cameras can be switched on and o. Other options in the App include
playback and manual recording on smartphone.
3

Termékspecifikációk

Márka: Nedis
Kategória: Hangrögzítő
Modell: AHDR208CBK

Szüksége van segítségre?

Ha segítségre van szüksége Nedis AHDR208CBK, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Hangrögzítő Nedis

Nedis

Nedis AHDR208CBK Útmutató

16 Július 2024

Útmutatók Hangrögzítő

Legújabb útmutatók Hangrögzítő

Dahua Technology

Dahua Technology X22A3N2 Útmutató

16 Január 2025
Dahua Technology

Dahua Technology X24A3L6 Útmutató

14 Január 2025
Hikvision

Hikvision DVR-204G-K1 Útmutató

31 December 2025
Comica

Comica CVM-WS50B Útmutató

27 December 2024
Philips

Philips Voice Tracer LFH0662 Útmutató

27 December 2024
API Audio

API Audio A2D Mic Preamp Útmutató

26 December 2024
Philips

Philips VoiceTracer DVT2010 Útmutató

22 December 2024
Philips

Philips SpeechMike Air LFH3025 Útmutató

22 December 2024
OM SYSTEM

OM SYSTEM DS-2700 Útmutató

17 December 2024
OM SYSTEM

OM SYSTEM RecMic II RM-4010N Útmutató

17 December 2024