Használati útmutató Navman MiVue 610 DC

Navman nincs kategorizálva MiVue 610 DC

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Navman MiVue 610 DC (39 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/39
User Manual
MiVueTM 610 DC
Got a Question?
Visit www.navman.com.au/faq | www.navman.co.nz/faq for more information
1
Revision: R00
(02/2024)
Trademark
All brand and product names are trademarks or registered trademarks of their respective companies.
Disclaimer
Specications and documents are subject to change without notice. Navman does not warrant this
document is error-free. Navman assumes no liability for damage incurred directly or indirectly from
errors, omissions, or discrepancies between the device and the documents. Visit www.navman.com.au or
www.navman.co.nz for the latest user manual.
Note
Not all models are available in all regions.
Depending on the specic model purchased, the colour and look of your device and accessories may not
exactly match the graphics shown in this document. It is recommended that you contact a skilled installer
(e.g. the service personnel of the vehicle or an authorised auto technician) for assistance and installation.
Regulatory information
For regulatory identication purposes, the Navman device is assigned a model number of N724. Marking
labels located on the exterior of your device indicate the regulations that your model complies with. Please
check the marking labels on your device and refer to the corresponding statements in this section. Some
notices apply to specic models only. The user needs to switch o the device when exposed to areas with
potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations.
WEEE
This product must not be disposed of as normal household waste, in accordance with the EU
directive for waste electrical and electronic equipment (WEEE – 2012/19/EU). Instead, it should
be disposed of by returning it to the point of sale, or to a municipal recycling collection point.
2
Product overview ................................................................................................... 4
Dash cam 4 .........................................................................................................
Rear recording camera 5 .......................................................................................
Function keys ................................................................................................... 6
Installing your dash cam in a vehicle 7 .........................................................................
Mounting the dash cam 7 .....................................................................................
Turning the device on/o 10 ......................................................................................
Resetting your dash cam 10 ..................................................................................
Using a memory card 11 ............................................................................................
Formatting a card ............................................................................................ 11
Using your dash cam 12 ............................................................................................
Navigating the user interface 12 ............................................................................
Recording videos while driving 12 .........................................................................
Viewing videos and photos 14 ..............................................................................
The menu screen 15 .................................................................................................
MiVueTM Manager 17 ................................................................................................
Installing MiVueTM Manager 17 .............................................................................
Playing recorded les 17 ......................................................................................
Safety precautions................................................................................................ 20
About the vehicle power adapter ...................................................................... 20
About the Li-ion coin cell battery 21 .......................................................................
Table of Contents
3
Caring for your device .......................................................................................... 22
About GPS .......................................................................................................... 23
Important notice .................................................................................................. 24
Software licence ............................................................................................. 24
Privacy notice 29 .................................................................................................
One-Year Limited warranty 31 ...............................................................................
4
Product overview
Dash cam
Note: Screenshots and product images are for illustrative purposes only and may dier from the actual
product.
1
1
1 Mounting socket
2 Camera lens
3 USB-C connector
4 Rear camera connector
5 System indicator
6 Microphone
7 Memory card slot
8 Speaker
9 Menu/Back button
q Up button
w Camera/Down button
e Event recording/Ok button
5
Rear recording camera
A rear recording camera is included with your purchase for monitoring events taking place
behind the vehicle.
1 Camera lens
2 Mounting base
3 Micro-USB connector
Note: 1080p 30 FPS Dual Video Make sure the device’s recording resolution is set to ( >
Recording Video Resolution > ) to enable the rear recording camera.
6
Function keys
The four function keys control the corresponding icons displayed on the LCD screen. Key
function may vary depending on the current screen.
REC 16:45:30
U
(Menu screen)
Highlights the previous item
Highlights the next item
Returns to the previous page
Selects the highlighted item
Opens the Menu screen *
Takes a photo **
Activates/deactivates emergency recording
REC 16:45:30
58 km/h
(Recording screen)
* Press and release to turn the device on, press and hold for 2 seconds to turn the device o,
press and hold for approximately 10 seconds then release the button to restart the device.
** Press and hold to switch between dash cam and rear camera (if installed) views.
7
Installing your dash cam in a vehicle
Note:
The dash cam should be placed near the rear-view mirror to ensure optimal camera angle and video
quality.
For your own safety, do not operate the controls of the product while driving. Using this product does
not exempt the driver from taking full responsibility for his/her driving behaviour, which includes
observing all trac rules and safety regulations.
Make sure that the camera lens is not blocked and no reective material appears near the lens. Please
keep the lens clean.
Video quality may degrade if the vehicle's windscreen is tinted.
The system will automatically calibrate the G-sensor during start-up. If the device’s viewing angle or
installation position was changed after start-up, restart the device to calibrate the G-sensor again.
Otherwise the G-sensor may malfunction and impact other device features such as event-driven
recording and Parking Mode (not available on some models) monitoring.
The dash cam is designed to stay connected with the vehicle power adapter at all times, however,
the device is capable of saving the last recording in case the vehicle’s power system fails during an
incident.
Mounting the dash cam
Make sure the vehicle is parked on level ground and follow the instructions below to mount
your dash cam.
Note:
The installation illustrations are for reference only. Device and cable placement may vary
depending on vehicle model. If you encounter any problems during installation, contact a
professional installer (such as the service personnel of the vehicle) for assistance.
8
1. Before attaching the device mount to the windscreen, it is recommended to clean the
windscreen with rubbing alcohol and make sure that the installation area is free of dust,
oil and grease.
2. Attach the electrostatic lm to the windscreen (make sure there are no air bubbles
trapped underneath), then install the device over the electrostatic lm.
Note:
If your vehicle’s windscreen has a third visor frit (a patch
of black dots around the rear view mirror), please do not
attempt to ax the electrostatic lm/dash cam in this area
as it is likely to fall o.
3. Connect the vehicle power adapter to the cigarette lighter. Route the cables through the
top ceiling and the A-pillar so that it does not interfere with driving. Make sure that the
cable installation does not interfere with the vehicles airbags or other safety features.
4. When adjusting the viewing angle, make sure that the camera’s view is parallel with level
ground and the ground to sky ratio is close to a 50/50 split.
9
Note:
To ensure correct orientation, the micro-USB port should be facing right when axing the rear
recording camera to the rear window glass.
10
Turning the device on/o
Once the dash cam is properly installed, it will turn
on/o once the vehicle engine is started/shut o,
respectively. You can also turn the device on or o
manually by pressing the power button (the topmost
function button) for three seconds.
When you power on your dash cam for the rst
time, follow the on-screen prompts to complete the
following:
l Select your preferred language.
l Select your local timezone.
l Set the preferred distance unit.
Resetting your dash cam
Occasionally you may need to force the device to restart when it stops responding or
becomes “frozen” or unresponsive. Press and hold down the power button for approximately
10 seconds then release the button to restart the device.
11
Using a memory card
Note:
DO NOT apply pressure to the centre of the memory card.
Navman cannot guarantee product compatibility with memory cards from all manufacturers. Please
always check the specications/warranty to ensure the memory card can be used in dash cameras
and loop recording devices. Please visit www.navman.com.au/memory-card for more information on
memory cards.
You may need to format your memory card periodically to ensure it remains in good working condition.
You should use separate MicroSD cards for the dash cam and other electronic products (such as a
digital camera).
You are advised to turn the device o before removing the memory card.
In order to record video footage, Navman dash cameras need a
microSD. It is very important to use a microSD card specically
designed to be used in dash cameras. It will ensure the card will be
more reliable and last longer; the wrong type of card has a greater
chance of failing, even after a short period of time. Please visit
www.navman.com.au/memory-card www.navman. or
co.nz/memory-card for more information on recommended SD
cards.
To insert the SD card, hold the card by its edges and gently insert it into the slot. To remove a
card, gently push the top edge of the card inwards to release it and pull it out of the slot.
Formatting a card
To format the memory card (all data will be erased), press > .Format
12
Using your dash cam
Navigating the user interface
1 Recording indicator
2 Time display
3 Microphone status
4 GPS signal indicator
5 Driving speed display
12 4
5
3
REC 16:45:30
58 km/h
Recording videos while driving
Continuous recording
Continuous recording will automatically commence shortly after the device is powered up.
Recording can be paused by pressing . Press to resume recording.
Videos taken during continuous recording are divided into multiple clips and saved under
the “Normal” folder, but recording does not stop between video clips. Once the folder has
reached its allocated capacity, the system will automatically record over the oldest video.
13
Event/Emergency recording
During continuous recording, if a sudden event has been detected, such as running over
a road bump, vehicle collision, high-speed driving, or making a sharp turn, the G-sensor
will prompt the dash cam to record the event. You can also press to manually activate
emergency recording while continuous recording is in progress.
Note: The sensitivity level of the G-sensor can be adjusted by going to > > Video Recording
G-sensor Sensitivity.
Event/emergency recording saves the duration from 5 seconds before until 15 seconds
after the event. Event-driven recordings are saved in the “Event” folder. Once the folder has
reached its allocated capacity, the system will automatically record over the oldest video.
Capturing a photograph
The dash cam can also be used as a camera to take photographs. Press to capture a still
image. Photos captured by the dash cam are stored in the “Photo” folder.
14
Viewing videos and photos
To view a video or photo captured by the dash cam:
1. Press > . File Playback
2. Select a folder (Normal/Event/Parking/Photo).
3. Select a video or image then press to view the le.
4. While viewing a le, you can:
Press to return to the le list.
While playing a video, press to play the previous/next video. /
Press to display a pop-up menu to perform the following actions:
Play/Pause: Resumes/pauses video playback.
Play front/rear video: Plays the corresponding front/rear video.
Delete: Deletes the current le (the corresponding front/rear video is also deleted).
While viewing a photo, press to display the previous/next photo. Press /
to display a pop-up menu to view the corresponding photograph captured by the rear
camera or delete the image.
Note:
Transfer videos to a PC, smartphone, or media player for the best viewing experience.
A deleted le cannot be recovered. Make sure important les are backed up.
If the dash cam is connected with a rear recording camera, photos and videos recorded by the dash
cam and rear recording camera are linked but stored in their respective folders. If one le is deleted,
the other le will also be processed accordingly.
15
The menu screen
Press to access the device’s menu settings:
File Playback: Plays recorded videos and photos.
Sound Recording: Enables/disables audio recording during video capture.
Video Recording
Video Clip Length 1 3 5 min: Sets the length ( / / ) of video clips captured during
continuous recording.
Video Resolution HDR 1080p 30fps 1080p : Sets the recording quality to ,
60fps 1080p 30fps Dual, or .
Frequency 50 Hz 60 Hz: Sets the frequency ( or ) for the camera to avoid problems
caused by articial light sources that are not constant.
EV: Sets the proper exposure level to adjust the brightness of the image.
G-Sensor Sensitivity :Sets the G-sensor’s sensitivity level for triggering event-
driven recording.
Stamps Coordinates G-Sensor:Sets the type of information ( or ) that will be
displayed on each recorded video.
Speed Stamp :Enables or disables driving speed display on each recorded video.
Text Stamp :Displays customisable text information on each recorded video.
System
Satellites :Displays the status of the GPS signal reception.
Date/Time :Sets the system date and time.
Use GPS Time: Time Zone Daylight Saving Select the appropriate and
Time settings for your location.
Manual: Press to adjust the highlighted value and press / to navigate
to the next eld. Press to save the settings.
16
Welcome Sound: Enables or disables the startup sound.
System Sound :Enables or disables system notication sounds.
Volume :Adjusts the volume level.
LCD Standby
Always On: Keeps the LCD on.
HUD: Activates Driving Speed Display Mode which only displays time and
vehicle speed.
10 sec/1 min/3 min: Sets the timer for the LCD to turn o automatically after
recording starts.
Language :Sets the system language.
Distance Unit Metric Imperial: Sets the preferred system ( / ) for measuring
distances.
Restore to Defaults :Restores the device to factory default settings.
Version :Displays software information.
Format :Formats the memory card (all data will be erased).
17
MiVueTM Manager
MiVueTM Manager is a tool for viewing videos recorded by the dash cam on your PC.
Note: Not all features are available on every model.
Installing MiVueTM Manager
Download the Setup le from https://www.navman.com.au/mivue-update or
https://www.navman.co.nz/mivue-update for your Windows or Mac PC. Double-
click Setup.exe and follow on-screen prompts to install MiVueTM Manager.
IMPORTANT! You may be prompted to install MOV and AVI codecs for video playback if they
are missing on your computer. Search online to install the required codecs.
Playing recorded les
1. Remove the SD card from the dash cam and access it on the computer via a card reader.
You are advised to copy the recording les to your computer for backup and playback.
2. Start MiVueTM Manager on the computer.
By default, MiVueTM Manager shows the calendar and the le list on the right.
When a recording le exists, you will see the date marked with a “ ” symbol. Click
that date to display the les that were recorded on that date.
You can choose the le type to display: (Parking Mode Event Normal Parking / /
recording is not available on all models).
To display all les in the current folder, click . To return to the calendar view, click All
Calendar.
3. Double-click a le on the le list to start playback.
18
4. The playback controls are described as follows:
1 72 3 4 5 6 8
1 Skips to the previous/next le on the list.
2 Starts or pauses video playback.
3 Changes the playback speed to 1/4x, 1/2x, 1x (default), 1.5x, or 2x.
4 Mutes or unmutes the volume.
5 Adjusts the volume level.
6 Activates the Zoom Tool where a section of the image is magnied.
7 Plays the video in full screen mode.
8 Displays the playback progress. You can click on a point along the track bar to jump
to a dierent spot in the video.
5. During playback, additional driving information from the dashboard panel and the
G-sensor chart are displayed below the video playback screen.
On the dashboard panel, click to display the map screen.
Note: The map may not display correctly if the computer is not connected to the Internet or your product
does not support GPS function.
The G-sensor chart displays data in 3-axis waveform about the car’s shift forward/
backward (X), to the right/left (Y) and upward/downward (Z).
19
6. The tool bar allows you to do the following:
12 3 4 5 6 87
1 Selects the folder where the recording les are stored.
2 Previews and prints the current video image.
3 Saves selected les to a specied location on your computer.
4 Captures and saves the current video image to a specied location on your computer.
5 Opens the Settings Menu which include the following items:
Change Language :Sets the display language of MiVueTM Manager.
Change Skin :Sets the colour scheme of MiVueTM Manager.
Check for Update :Checks online for a newer version of MiVueTM Manager.
Internet access is required.
About :Displays the version and copyright information of MiVueTM Manager.
6
Exports the GPS information of the selected le in the KML format to the specied
location on your computer.
7 Opens YouTube™ on a web browser for you to upload videos (YouTube™ account
required).
8 If a rear recording camera is installed, “F” and “R” letters displayed on a lename in
the playlist indicate the video is paired with a corresponding front (F) or rear video (R).
The video will be shown in PIP (picture-in-picture) mode. You can switch between
front and rear videos by clicking .
20
Safety precautions
About the vehicle power adapter
Use only the vehicle power adapter supplied with your device. Use of another type of the
vehicle power adapter may result in malfunction and/or danger.
This product is intended to be supplied by a LISTED Power Unit marked with “LPS”,
“Limited Power Source” and output rated + 5 V dc / 2 A.
Do not use the vehicle power adapter in a high moisture environment. Never touch the
vehicle power adapter when your hands or feet are wet.
Allow adequate ventilation around the vehicle power adapter when connected to the
device. Do not cover the vehicle power adapter with paper or other objects that will
reduce cooling. Do not use the vehicle power adapter while it is inside a carrying case.
Connect the vehicle power adapter to a proper power source. The voltage requirements
are found on the product case and/or packaging.
Do not use the vehicle power adapter if the cord becomes damaged.
Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit
if it is damaged or exposed to excess moisture.
For more information on how to recycle old electronic devices, please contact your local
council oce. You can also visit www.navman.com.au / www.navman.co.nz to view our latest
trade-in oers.
21
About the Li-ion coin cell battery
CAUTION - KEEP DEVICE AND BATTERY OUT OF REACH OF CHILDREN
This product contains a non-replaceable internal coin cell battery that is xed internally. Do
not attempt to disassemble, crush, puncture, or dispose the device in re or water.
Swallowing the battery may lead to serious injury or death in as little as two hours due to
chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed or inserted a coin cell battery, immediately call the
24-hour Poisons Information Centre by dialing 131 126 for expert advice.
Examine the device and make sure it hasn’t been forced open and components are
correctly secured.
THE LITHIUM-ION COIN CELL BATTERY CONTAINED IN THE PRODUCT MUST BE
RECYCLED OR DISPOSED OF PROPERLY. IT IS HIGHLY RECOMMENDED YOU USE
YOUR PRODUCT ONLY WITH THE SUPPLIED DC POWER LEAD (VEHICLE POWER
ADAPTER/BATTERY CABLE) AND AC ADAPTER (HOME POWER ADAPTER) FOR
POWERING THE DEVICE.
For more information on how to recycle your old electronic devices and lithium batteries,
please contact your local council oce.
22
Caring for your device
Taking good care of your device will ensure trouble-free operation and reduce the risk of
damage.
Keep your dash cam away from excessive moisture and extreme temperatures.
Avoid exposing your device to direct sunlight or strong ultraviolet light for extended
periods of time.
Do not place anything on top of your device or drop objects on your device.
Do not drop your device or subject it to severe shock.
Do not subject your device to sudden and severe temperature changes. This may cause
moisture condensation inside the unit and damage the device. In the event of moisture
condensation, allow the device to dry out completely before use.
Avoid touching the screen surface with sharp objects or using paper towels to clean the
screen as it may be scratched. Non-adhesive generic screen protectors designed for
portable devices with an LCD can be used to protect the screen from minor scratches.
Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the screen
and the exterior of your device.
Never attempt to disassemble, repair or make any modications to your device.
Disassembly, modication or any attempt at repair could cause damage to your device and
even bodily injury or property damage and will void any warranty.
Do not store or carry ammable liquids, gases or explosive materials in the same
compartment as your device, its parts or accessories.
To discourage theft, do not leave the device and accessories in plain view in an unattended
vehicle.
Overheating may damage the device.
Operating temperature: 0 to 45°C.
23
About GPS
GPS is operated by the United States government, who is solely responsible for its
performance. Any change to the GPS system can aect the accuracy of all GPS equipment.
GPS satellite signals cannot pass through solid materials (except glass). When you are
inside a tunnel or building, GPS positioning is not available. Signal reception can be
aected by situations such as bad weather or dense overhead obstacles (e.g. trees,
tunnels, viaducts and tall buildings).
GPS positioning data is for reference only.
24
Important notice
In addition to the user manual, this document contains the following terms that apply to your
use of your Navman product:
1. Software licence;
2. Privacy notice; and
3. One-year limited warranty.
The limited warranty applies separately to your use of the product, and should be read
independently of the other terms contained in the user manual.
Software licence
1. Generally.
Navman (“Licensor”) is willing to grant the following licence (the “Licence”) to use the
software, if any, provided with this Software Licence and Privacy Notice (whether provided
separately or associated with a device) (the “Licensed Product”) to the original retail purchaser
(and, subject to the limitations below, certain transferees) of the Licensed Product or the
device upon or with which the Licensed Product was installed or associated as of the time of
purchase (the “Customer”) only if Customer accepts all of the terms of the Licence.
PLEASE READ THESE TERMS CAREFULLY. USING THE SOFTWARE WILL CONSTITUTE
CUSTOMER’S ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS LICENCE. PLEASE
NOTE THAT THIS LICENCE IS NOT ITSELF A LICENCE TO USE NAVIGATION DATA THAT
MAY BE INCLUDED WITH A DEVICE. NAVIGATION DATA IS COVERED BY A SEPARATE
LICENCE AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENCE,
DO NOT
INSTALL OR USE THE LICENSED PRODUCT. RATHER, RETURN THE LICENSED PRODUCT
(AND, IF YOU RECEIVED THE LICENSED PRODUCT INSTALLED ON A DEVICE, RETURN
THE DEVICE) PROMPTLY, INCLUDING ALL PACKAGING AND WRITTEN MATERIALS,
TO LICENSOR AND LICENSOR WILL REFUND TO CUSTOMER THE ORIGINAL RETAIL
PRICE PAID FOR THE PRODUCT (LESS DELIVERY AND HANDLING CHARGES, WHERE
PERMITTED).
25
2. Licence Grant.
This section does not limit or aect the rights of any person under the Consumer Guarantees
(as dened in section 7 below).
Licensor grants to Customer a non-exclusive licence (without right to transfer, assign, or
sublicence except as stated in this Licence) to use: (a) the Licensed Product (that term being
further restricted where the Licensed Product is, or contains, a work of authorship xed in
tangible (including electronic) media to mean the single purchased copy thereof); and (b)
the accompanying materials, including any manuals contained in the Licensed Product (the
“Materials”), in accordance with the terms and conditions of this Licence.
3. Limitations on Use.
Customer will not place, secure, or use, or permit any other person to place, secure, or
use, the Licensed Product or any device associated with the Licensed Product, in a manner
that limits any user or operator’s view, that is likely to distract any user or operator, or that
may cause accidents, personal injury, or property damage. Customer, and any user that
Customer permits to use the Licensed Product or any associated device, is solely responsible
for observing safe driving, operating, and other practices so as to avoid accidents or injury
to persons or property. Certain functionality of the Licensed Product or the device may be
dependent upon the use of hardware (sometimes called a “dongle” or “module”) or software
keys that enable or unlock the functionality. This Licence does not permit Customer to use
any of such functionality unless Customer has also legitimately bought or otherwise obtained
the appropriate dongle, module, or software key. Each dongle, module, or software key
is intended solely to enable the portion of functionality of the Licensed Product or device
described in the documentation associated with the dongle, module, or software key and no
other functionality.
4. Intellectual Property Rights.
As between Licensor and Customer, the copyright and all other intellectual property rights
in the Licensed Product and Materials (including any enhancements or modications) are
the property of Licensor. Customer must not rent, lease, reproduce, translate, adapt, vary,
reverse-engineer, or modify the Licensed Product or Materials or communicate the same to
any person other than in accordance with the terms of this Licence (or to the extent permitted
26
by mandatory laws). Customer may not rent or lend the Licensed Product, or reproduce,
prepare any derivative work, distribute, perform publicly, display publicly, perform by digital
or other transmission, or broadcast the Licensed Product. Any rights not expressly granted in
this Licence are reserved by Licensor.
5. Transfer of Licence.
Customer may transfer this Licence to a subsequent transferee of the Licensed Product or the
device, if any, upon which the Licensed Product is installed, provided that Customer transfers
to the transferee all physical embodiments of the Licensed Product, the device upon which
the Licensed Product is installed, if any, and all of the Materials, and retains no copy or part of
the Licensed Product or the Materials.
Where the Licensed Product is transferred, technical support oered by the Licensor will only
be available to the transferee, if the transferee provides proof of the original purchase of the
Licensed Product.
6. Copying.
Customer may not copy the Licensed Product or Materials except that one copy of any
separate software component of the Licensed Product may be made to the extent that such
copying is necessary for Customer’s own backup purposes.
7. Liability.
7.1 Interpretation - Consumer Guarantees.
In this Software Licence and Privacy Notice:
(a) “Australian Consumer Law” has the meaning given to that term in section 4 of the
Competition and Consumer Act 2010 (Commonwealth of Australia);
(b) “Consumer” has the meaning given to that term in section 3 of the Australian Consumer
Law, or section 2 of the New Zealand Consumer Guarantees Act 1993, as the context requires;
(c) “Consumer Guarantees” has the meaning given in section 7.2 below; and
(d) “PDH Goods or Services” means goods or services of a kind ordinarily acquired for
personal, domestic or household use or consumption.
27
7.2 Consumer Guarantees
Under the Australian Consumer Law (and other similar legislation of Australian states and
territories) and the New Zealand Consumer Guarantees Act 1993, certain statutory guarantees
are conferred in relation to the supply of goods or services to a Consumer (“Consumer
Guarantees”).
7.3 Limitation of Liability – Consumer Guarantees.
Where you as a Consumer acquire goods and services under this Licence from Licensor:
(a) subject to clause 7.4, in Australia or New Zealand, where the goods or services are PDH
Goods or Services, the operation of the applicable Consumer Guarantees cannot be, and are
not in this Licence, excluded, restricted or modied; or
(b) in Australia (or if Consumer Guarantees are otherwise conferred in relation to goods and
services by Australian law), where the goods or services are not PDH Goods or Services,
Licensor limits its liability for a failure to comply with any Consumer Guarantee (other than
where to do so would otherwise cause all or part of this clause to be void) to (at Licensor’s
option): (i) in the case of goods, repairing or replacing the goods or paying the cost of having
the goods repaired or replaced; and (ii) in the case of services, re-supplying the services or
paying the cost of having the services re-supplied, and Licensor does not exclude or limit the
operation of the Consumer Guarantees under any other provision of this Licence or in any
other manner and you agree it is fair and reasonable in all the circumstances for Licensor’s
liability to be so limited.
To the extent permitted by law and except for the Consumer Guarantees, Licensor excludes
from this Licence all representations, guarantees, conditions, warranties, rights, remedies,
liabilities and other terms that may be conferred or implied by statute, general law or
custom, in fact or otherwise, except any guarantee, implied term or right conferred under
any legislation (including the Australian Consumer Law and the New Zealand Consumer
Guarantees Act 1993), the exclusion of which would contravene legislation or cause part or all
of this clause to be void.
28
7.4 Business Supplies in New Zealand
In New Zealand, where both Licensor and Customer are ‘in trade’ and Customer is acquiring
the goods and services for the purposes of a business, then both Licensor and Customer
acknowledge and agree that the statutory guarantees and implied terms, covenants and
conditions contained in the New Zealand Consumer Guarantees Act 1993 are excluded to
the fullest extent permitted by law and do not apply, and Licensor does not exclude or limit
the operation of the Consumer Guarantees under any other provision of this Licence or in any
other manner and you agree it is fair and reasonable in all the circumstances for Licensor’s
liability to be so limited.
7.5 Limitation of Liability – General.
To the extent permitted by law and except for any liability under the Consumer Guarantees:
(a) the Licensor will not, under any circumstances, be liable under the law of tort, contract, or
otherwise for any loss of prots or loss of data or any indirect or consequential loss or damage,
however caused, arising out of or in connection with this Licence;
(b) the Licensor’s aggregate liability for all claims arising out of or in connection with this
Licence will be limited to the total amount actually and originally paid at retail by the customer
for the Licensed Product; and (c) without limiting the foregoing or any other limitation of
liability or disclaimer contained in this Software Licence and Privacy Notice, all limitations and
disclaimers contained in the product warranty or any limited warranty for any product sold in
connection with the Licensed Product also apply to this Licence.
8. Termination.
Licensor may, in addition to any other remedies available to Licensor, terminate this Licence
immediately if Customer breaches any of its obligations under this Licence.
9. Product warranty.
The warranty for the Licensed Product is set out in the warranty documentation provided with
the Licensed Product or the device on which the Licensed Product is installed (subject to any
exclusions and limitations set out in this document), and applies in addition to this Licence and
to any rights that you have under the Consumer Guarantees.
29
10. Governing Law and interpretation.
Where the Licensed Product was acquired by the original retail purchaser in Australia, this
Licence is governed by the laws of New South Wales, the parties submit to the non-exclusive
jurisdiction of the courts of New South Wales. Where the Licensed Product was acquired
by the original retail purchaser in New Zealand, this Licence is governed by the laws of New
Zealand, the parties submit to the non-exclusive jurisdiction of the courts of New Zealand. The
term “Navman” refers to MiTAC Australia Pty Ltd of Unit 5, 43-51 College Street, Gladesville,
NSW 2111, Australia.
Privacy notice
Location Information
The Navman device and software a customer uses may, by its nature and function,
create, contain, receive, store, or transmit location based information that, either alone
or in combination with other information, could identify a person, establish a person’s
whereabouts, reveal the nature or type of places that a person visits or in which a person is
interested, or identify a person’s movements, habits, and other information about a person
(“Location Information”). This Location Information is used to provide location related
services to customers. For this purpose, Navman* may disclose Location Information to its
related companies, service providers, and agents which may be located overseas in countries
including the USA, China, Taiwan, Australia, New Zealand and the Philippines. Except as
explained below in relation to country location when using connected device features,
it is Navman’s policy not to collect or store Location Information, or to provide Location
Information to unaliated third parties or persons who are not agents or service providers
of Navman, without rst receiving the consent of the customer (such as where the customer
subscribes to, or directly or indirectly requests, location-based or similar services from
Navman or a third party). Notwithstanding this clause, if, and to the extent that, a court order,
subpoena, or rule of law requires that Navman disclose Location Information to a third party,
Navman reserves the right to comply with such court order, subpoena, or rule of law.
30
Connected Device Information
If the customer accesses the Navman connected device feature (or a similar feature),
including from a website or mobile device, Navman may collect personal information about
the customer through the connected device, such as the customer’s username, email
address, social networking account username (if the customer chooses to connect to its
social networking account), what country the customer is located in when using the device
(but not other Location Information), and internet protocol address, (“Connected Device
Information”). Connected Device Information may be automatically synced between the
customer’s compatible and connected devices. When a customer uses the connected device
feature, Location Information and dash cam recordings pass temporarily through our cloud
infrastructure and to your device for the purpose of providing that service to you. However,
we do not collect or store this data (except country location as explained above), even
temporarily.
Navman will use this information to full the customer’s requests for products and services,
for communication, to oer products or services related to the customer’s location (including
by providing information about local businesses onto the customer’s Navman device),
interests and preferences and to assist Navman in its development of products and services.
Connected Device Information may be provided to Navman’s related companies, agents and
third party service providers to enable Navman to deliver programs, products, information and
services and to maintain Navman’s websites, mailing lists and other services. The recipients
that Connected Device Information is provided to may be located in dierent countries to
that in which the customer is based, including in the USA, China, Taiwan, Australia, New
Zealand and the Philippines. The third parties that data is provided to may include social
media providers if the customer has linked the connected device feature to a social media
account. Connected Device Information will not be transferred to third parties that are not
acting on behalf of Navman without the customer’s consent unless required by law or for
the purposes disclosed in this clause. The customer may choose not to provide Connected
Device Information to Navman, but this may cause certain features of the connected device to
be unavailable.

Termékspecifikációk

Márka: Navman
Kategória: nincs kategorizálva
Modell: MiVue 610 DC

Szüksége van segítségre?

Ha segítségre van szüksége Navman MiVue 610 DC, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Navman

Navman

Navman MiVue SmartBox III Útmutató

5 Április 2025
Navman

Navman MiVue Rider DC Útmutató

8 Január 2025
Navman

Navman MiVue 890 DC Útmutató

6 Szeptember 2024
Navman

Navman MiVue 610 DC Útmutató

6 Szeptember 2024
Navman

Navman AUTO 570 DUAL Útmutató

6 Szeptember 2024
Navman

Navman MiVue M820D Útmutató

29 Augusztus 2024
Navman

Navman MiVue 160 GPS TAG Útmutató

29 Augusztus 2024
Navman

Navman MiVue 110 Útmutató

29 Augusztus 2024
Navman

Navman MiVue 170 SAFETY Útmutató

29 Augusztus 2024
Navman

Navman MiVue 920 DC Útmutató

29 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
Soundstream

Soundstream VRN-64HBL Útmutató

10 Április 2025
Panasonic

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025
Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025