Használati útmutató Naim DAC

Naim audio/videó-konverter DAC

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Naim DAC (28 oldal) a audio/videó-konverter kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/28
R E F E R E N C E M A N U A L
D A C D I G I T A L T O A N A L O G U E C O N V E R T E R
E N G L I S H , D E U T S C H , F R A N Ç A I S , I T A L I A N O ,
E S P A Ñ O L , N E D E R L A N D S
1
NAIM DAC – English
1 DAC Introduction
The Naim DAC digital to analogue converter is a highly versatile product and we strongly
recommend that you read this manual. You should also read the Statutory And Generic
Information booklet packed with the product as it contains important mains power safety
warnings.
A number of power supply upgrade options are possible for the DAC. Contact your local
retailer or distributor for advice on power supply upgrade options.
All references to Naim preamplifiers in the manual also cover the preamplifier section of
Naim integrated amplifiers.
Made for iPod 5th generation, iPod Touch, iPhone.
“Made for iPod” and “Made for iPhone” mean that an
electronic accessory has been designed to connect
specifically to iPod or iPhone respectively and has been
certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory
standards.
iPod and iPhone are trademarks of Apple Inc., registered in
the U.S. and other countries.
1.2 DAC Ba sics
The Naim DAC is a ten input digital to analogue converter
capable of handling stereo audio data of 8 bit to 32 bit
resolution and 32kHz to 768kHz sampling rate. Its stereo
analogue output is available via DIN or RCA phono
sockets.
Eight of the DAC digital inputs are accessed via optical or
coaxial S/PDIF inputs on the rear panel. These input sockets
are selected by pressing one of the front panel input
selection buttons.
Two further digital inputs are accessed via USB sockets;
one on the front panel and one on the rear panel. The
USB sockets can be used to connect USB memory sticks
carrying audio files or Apple iPod or iPhone models. The
USB sockets are selected automatically when a USB device
is connected.
When a USB device is connected, any appropriate audio
files it holds will be available for playback through the
DAC. The DAC front panel button indicator will dock
illuminate and the input selection buttons will operate as
previous next stop play, , and buttons. The DAC is returned
to S/PDIF input operation by disconnecting the USB device
or pressing the button. The last S/PDIF input used will dock
then be selected.
The DAC can be controlled either from its front panel
buttons or using a Naim remote handset in preamplifier
mode. An Apple Remote handset can also be used to
control playback and volume.
1.1 DAC Front Pa nel
dock/undock
data sync indicator
input selection and
transport control
high denition
indicator
USB socket
DAC Specification
Input connections: 4 optical, 4 coax, 2 USB
Outputs: DIN or RCA phono
Frequency response: 10Hz to 20kHz +0.1dB-0.5dB
Max output voltage: 2.2VRMS
Distortion and noise: <0.002%
Sample rate: USB: 32kHz to 768kHz, 32bit
S/PDIF: 32kHz to 192kHz, 32bit
Apple portable: 48kHz max
Digital formats: S/PDIF, WAV
Upgrade PSU: XPS, CD555PS
Mains supply: 100-120V, 220-240V, 50/60Hz
Dimensions: 70mm x 432mm x 301mm (H X W D)
Power consumption: <30VA
Weight: 5.6kg
Finish: Black anodised
2
NAIM DAC – English
2.2 S/PD IF Inputs
The eight rear panel S/PDIF inputs are provided with
connection format and socket options. These are listed in
the following table:
Input Optical Socket Coaxial Socket
S/PDIF 1 TOSLINK BNC (75Ω)
S/PDIF 2 TOSLINK BNC (75Ω)
S/PDIF 3 TOSLINK RCA phono
S/PDIF 4 TOSLINK RCA phono
Only one connection format (optical or coaxial) for
each input may be used at any one time. However,
both may be connected simultaneously and the DAC
will automatically select the socket on which valid data
is present. If a data stream is present on both sockets,
selection can be switched between the two by pressing
the relevant input button.
Note: If valid data is present on both the coaxial and
optical sockets of the selected input, the stream that
appeared first will be preferred.
2.3 USB Inputs
The front and rear panel USB sockets are for the
connection of either USB memory sticks or Apple iPod or
iPhone models. Connect iPod and iPhone models using
the standard Apple USB cable. When USB hardware is
connected the DAC will automatically switch to the
docked USB input.
Note: If both USB inputs are docked, the front panel input
will take priority.
The DAC is able to handle any audio file format that can
be played on the Apple device, however, a lossless format
will provide the best audio quality.
2.4 Analogue Outputs
The DAC is fitted with both DIN and RCA phono analogue
output sockets. The DIN option will provide the best audio
performance. Set the rear panel switch Socket Selection
to the desired option. For best audio performance only
connect one audio output. If the DAC analogue output
is to be connected to a Naim preamplifier, use the Aux 1
input if available. See Section 3.1.
2.5 Remote Control Output and Inp ut
The DAC can send and receive remote control signals to
enable the following functions:
• Automatic preamplifier input switching.
• Use of an external IR sensor.
The DAC Remote Control In and Out sockets require a
mini-jack (3.5mm) plug. Naim preamplifier Remote Control
In sockets require either a mini-jack or RCA phono plug.
Your Naim retailer will be able to provide an appropriate
cable if necessary.
2.1 DAC Rear Pa nel
mains
input
and fuse
power remote control
out socket signal ground
switch
USB socket output
socket
selection
switch
RCA phono
output DIN
output
optical S/PDIF
inputs 1 to 4
RCA phono coaxial S/PDIF
inputs 3 and 4
BNC coaxial S/PDIF
inputs 1 and 2
remote control in socket
(for use with an external IR receiver)
power supply upgrade
socket (link plug tted)
2 DAC Installation and Connections
The DAC should be installed on a dedicated equipment stand intended for the purpose.
Do not stand it directly on top of another item of equipment. Ensure also that the audio
system volume is turned down before switching on. The DAC power switch is positioned on
its rear panel.
Connect the DAC to mains power using the mains cable supplied or a Naim Power-Line.
Connect audio inputs and outputs using high quality interconnect cables. Naim Hi-Line
cables will provide the best results.

Termékspecifikációk

Márka: Naim
Kategória: audio/videó-konverter
Modell: DAC

Szüksége van segítségre?

Ha segítségre van szüksége Naim DAC, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók audio/videó-konverter Naim

Naim

Naim DAC Útmutató

24 Augusztus 2024

Útmutatók audio/videó-konverter

Legújabb útmutatók audio/videó-konverter

TV One

TV One 1T-EDID-11 Útmutató

8 Április 2025
BZBGear

BZBGear BG-UHD-18GFE Útmutató

3 Április 2025
PureTools

PureTools PT-C-HDEARC-4K Útmutató

2 Április 2025
ATen

ATen VE170Q Útmutató

2 Április 2025
ATen

ATen VS1808T Útmutató

2 Április 2025
INOGENI

INOGENI U-BRIDGE 3 Útmutató

2 Április 2025
Sescom

Sescom SES-X-FA2LXBT01 Útmutató

2 Április 2025
Teradek

Teradek COLR Útmutató

29 Március 2025
Pengo

Pengo VideoSync Grabber Box Útmutató

29 Március 2025
Mean Well

Mean Well PSD-45B-24 Útmutató

26 Március 2025