Használati útmutató Monoprice 2667

Monoprice vezérlő 2667

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Monoprice 2667 (5 oldal) a vezérlő kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/5
SERIAL ATA
SERIAL ATASERIAL ATA
SERIAL ATA
HO ST C ON TRO LLER CA RD
HO ST C ON TRO LLER CA RDHO ST C ON TRO LLER CA RD
HO ST C ON TRO LLER CA RD
USER MANUAL
USER MANUALUSER MANUAL
USER MANUAL
All contents and spe cifi cation in thi s man ual are subje ct to c hange without notic e
All brand and trademarked an d men ti oned in thi s manual are property of thei r respectiv e owners.
WARNINGWARNINGWARNINGWARNING
Before installing and activating RAID function, Please make sure
you have a complete backup of your existing data from hard
drives. Manufacturer is not responsible for data loss due to
abuse, misuse, or neglect. Should you have any installation
problem, please contact your dealer for assistance.
G5019755311410
FeaturesFeaturesFeaturesFeatures
This Serial
ATA
host controller card is designed to offer a high performance, cost effective and reliability
solution to user who needs to accommodate storage peripherals with the new Serial
ATA
interface. It can control
four independent 2 Serial channels, each channel has its own Serial
ATA
bus and will support one Serial
ATA
device. This card supports the Serial
ATA
(Generation 1) transfer rate of 1.5 Gb/s (150MB/s).
SpecificationsSpecificationsSpecificationsSpecifications
·Silicon Image SIL3114 Serial
ATA
(SATA) host controller chipset
·Compliant with Serial
ATA
Specification Revision 1.0
·Supports Serial
ATA
Generation 1 transfer rate of 1.5Gb/s (150MB/s)
·Compliant with PCI Specification Revision 2.2
·Compliant with PCI IDE Controller Specification Revision 1.0
·Compliant with programming Interface for Bus Master IDE Controller Revision 1.0
·Supports four independent Serial
ATA
channel
·Independent 256-byte FIFOs per Serial
ATA
channel for host reads and writes
RAIDRAIDRAIDRAID FunctionsFunctionsFunctionsFunctions (optional)(optional)(optional)(optional)
·Supports RAID functions 0, 1 or 0+1
·Supports co-exist RAID set and Non-RAID HDD
·Allow HDDs with different sizes to be configured in a RAID set
Accessories
AccessoriesAccessories
Accessories
·One User Manual
·One Serial
ATA
host controller card
·Two Serial
ATA
cables
·One Driver CD
How
HowHow
How to
toto
to install
installinstall
install the
thethe
the Serial
SerialSerial
Serial
ATA
ATAATA
ATA
host
hosthost
host controller
controllercontroller
controller card
cardcard
card into
intointo
into your
youryour
your computer
computercomputer
computer
1. Turn off your computer and all external devices connect to it.
2. Disconnect your computer from the power sources.
3. Open the computer case. Refer to your computer user manual for more details.
4. Find an available PCI slot and remove the slot bracket. Save the bracket screw for later use.
5. Align the serial
ATA
host controller card horizontally with respect to the PCI slot and insert it into the
slot firmly and evenly. Take care not to force it into the shot. Once you have properly positioned the Serial
ATA
host controller card into the slot, fasten it to the computer case with the blacker screw you have saved.
6. Connect the HDD LED connector from the computer case to the HDD Busy LED connector (JP4) on
the Serial
ATA
host controller card.
7. Connect any SERIAL
ATA
device to the connector(s) of the Serial
ATA
host controller card with the
provided serial
ATA
cable.
8. Close the computer case. Make sure to reconnect all the external devices to your computer.
Driver
Driver
DriverDriver Installation
Installation
InstallationInstallation
Note: Current drivers can only support Windows 98/98SE, ME, NT, 2000 and XP.
Driver Locations
This Serial
ATA
host controller card has two sets of drivers.
a) SIL3114 RAID :Serial
ATA
host controller card (BIOS with RAID function).
b) SIL3114 :Serial
ATA
host controller card (BIOS without RAID function).
These two sets of drivers can be located in these two directories respectively of the Driver CD.
1.SIL3114RAID
1.SIL3114RAID
1.SIL3114RAID1.SIL3114RAID :/Silicon_Image/SIL3114RAID/
:/Silicon_Image/SIL3114RAID/
:/Silicon_Image/SIL3114RAID/:/Silicon_Image/SIL3114RAID/
2.SIL3114
2.SIL31142.SIL3114
2.SIL3114 :/Silicon_Image/SIL3114/
:/Silicon_Image/SIL3114/:/Silicon_Image/SIL3114/
:/Silicon_Image/SIL3114/
3.SIL3114RAID3.SIL3114RAID3.SIL3114RAID3.SIL3114RAID :/Silicon_Image/3114R5_Vista:/Silicon_Image/3114R5_Vista:/Silicon_Image/3114R5_Vista:/Silicon_Image/3114R5_Vista
WindowsWindowsWindowsWindows 98/98SE98/98SE98/98SE98/98SE orororor WindowsWindowsWindowsWindows MEMEMEME
Step
StepStep
Step 1:
1:1:
1: Start Windows 98/98SE or Windows ME
Step
StepStep
Step 2
22
2: The “Update Device Driver Wizard” will appear, informing you that it has found a “PCI RAID
Controller”, click the “Next” button.
Step
Step
StepStep 3:
3:
3:
3: (a) Windws 98/98SE user - Select “Specify a location”.
(b)Windws ME user - Select “Specify the location of the driver (Advanced)” and then select “Specify
a location”.
StepStepStepStep 4:4:4:
4: Insert the Driver CD in the CDROM drive and click on the “Browse” button.
Step
Step
StepStep 5:
5:
5:
5: At the “Browse” option:
(1) select CDROM drive.
(2) Select folder “Silicon_Image”.
(3a) BIOS with RAID function: Select folder “SIL3114RAID” or
(3b) BIOS without RAID function: Select folder “SIL3114”.
(4) Select folder “Win_Drv”
StepStepStepStep 6:6:6:
6: The “Update Device Driver Wizard” Will appear, informing you that
it
has found:
(1a) BIOS with RAID function: “Silicon Image SIL 3114 SATARaid Controller” driver or
(1b) BIOS without RAID function: “Silicon Image SIL 3114 SATALink Controller” driver.
(2) Click the “Next” button.
StepStepStepStep 7:7:7:
7: Follow the instructions to finish up the driver installation.
Windows
WindowsWindows
Windows NT
NTNT
NT 4.0
4.04.0
4.0 and
andand
and Windows
WindowsWindows
Windows 2000/XP/Vista
2000/XP/Vista2000/XP/Vista
2000/XP/Vista Fresh
FreshFresh
Fresh Installation
InstallationInstallation
Installation
If you are Performing a new Windows NT 4.0, 2000 or XP installation to a
SATA
hard drive attached to the
Serial
ATA
host controller card.
Step
StepStep
Step 1
11
1: Make sure to copy the Windows driver from the Driver CD on to a 1.44MB floppy diskette.
You
will
need the driver in the 1.44MB floppy diskette during the installation.
(a) BIOS with RAID function: Copy the /Silicon_Image/SIL3114RID/WIN_Drv driver from the
Driver CD to the diskette.
(b) BIOS without RAID function: Copy the /Silicon_Image/SIL3114/Win_drv driver from the Driver
CD to the diskette.
Step
Step
StepStep 2:
2:
2:
2: Make sure the
SATA
hard drive is properly connected to the Serial
ATA
host controller card and the
card is properly installed into a PCI slot.
Step
StepStep
Step 3:
3:3:
3: If your Windows NT/2000/XP Installation CD is bootable, simply put the CD into the CDROM drive

Termékspecifikációk

Márka: Monoprice
Kategória: vezérlő
Modell: 2667

Szüksége van segítségre?

Ha segítségre van szüksége Monoprice 2667, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók vezérlő Monoprice

Monoprice

Monoprice 2530 Útmutató

19 Augusztus 2024
Monoprice

Monoprice 2667 Útmutató

18 Augusztus 2024

Útmutatók vezérlő

Legújabb útmutatók vezérlő

Sonance

Sonance VC60R Útmutató

2 Április 2025
Trust

Trust Mylox GXT 735G Útmutató

30 Március 2025
Trust

Trust Mylox GXT 735 Útmutató

30 Március 2025
American DJ

American DJ STAGE SETTER-8 Útmutató

30 Március 2025
American DJ

American DJ DP-DMX20L Útmutató

30 Március 2025
Visual Productions

Visual Productions TimeCore Útmutató

30 Március 2025
PCE Instruments

PCE Instruments PCE-RE22T Útmutató

28 Március 2025
Metronic

Metronic Zap 3 495383 Útmutató

27 Március 2025
Turtle Beach

Turtle Beach Recon Útmutató

27 Március 2025
DJI

DJI Motion Controller Útmutató

14 Január 2025