Használati útmutató Monitor Audio SB2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Monitor Audio SB2 (20 oldal) a Soundbar kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/20
O w n e r s M a n u a l
SOUNDBAR SERIES
Р у к о в о д с т в о п о э к с п л у а т а ц и и
G u i d e d ' u t i l i s a t i o n
M a n u a l e U t e n t e
B e d i e n u n g s a n l e i t u n g
M a n u a l d e u s u a r i o
M a n u a l d o U t i l i z a d o r
G e b r u i k e r s h a n d l e i d i n g
用 户 手 册
Introduction
Congratulations and thank you for your purchase from the Passive Soundbar Series of loudspeakers. We are condent they will provide
years of enjoyment and pleasure as only high quality components have been used throughout.
Please follow this user manual carefully as it contains important information about set up procedures.
Set Up and Positioning
The Passive Soundbars are designed to be mounted on a wall using our Soundbar Bracket (sold separately), a third party bracket system
(for example Sanus), or sit on a shelf using the integrated feet.
The Soundbar should be positioned as close to the TV as possible to minimise any potential gapsin sound, and ensuring the dialogue
sound appears to originate from the TV itself.
Being a complete front soundstage in a single cabinet, there are no other set up procedures to follow. Suggested surround speakers
can be seen below.
Connections
Either bare wire, banana plugs or spade connectors can be used to connect the Soundbars. When wall mounting, we recommend using
bare wire due to the limited space at the rear of the cabinet.
When using banana plugs, remove the red and black plastic terminal plugs using ngers or pliers.
Connect the Left, Centre and Right hand speaker cables from the AV Amplier to the corresponding input on the Soundbar.
Surround Speakers & Subwoofers
Surround speakers to match the Soundbar Series products would be determined to system requirements. Recommended timbre matched
partners would be MASS10’s, Radius 90’s and speakers from the Custom Install 100 Series and Control Performance 100 Series.
Recommended subwoofers would be from the MASS, Bronze, or Radius Series, or if positioned in a large room, the Silver or Apex Series.
2 Soundbar Series
monitoraudio.com 3
Specications
Model SB2
Left - Centre - Right
SB3
Left - Right Centre
Frequency Response (-3dB) 90Hz – 30kHz 80Hz – 30kHz
Sensitivity (1W@1M) 84dB 84dB 87dB
Nominal Impedance 8 Ohms 8 Ohms
Power Handling Single (RMS) 40W 40W 80W
System Power Handling (RMS) 100W
(High pass filter set to 100Hz)
100W
(High pass filter set to 100Hz)
Recommended Amp Requirements 30 - 100W 30-100W
Recommended High Pass Crossover
Frequency 80 - 120Hz 80 - 120Hz
Maximum SPL 104dBA
(108.8 all channels driven)
104dBA
(108.8 all channels driven)
Bass Alignment Auxiliary Bass Reflex (ABR)
Loading Auxiliary Bass Reflex (ABR) Loading
Drive Unit Complement
3 x 4” (100mm) C-CAM
cone bass/ mid driver.
3 x 1" (25mm) C-CAM gold
dome tweeter
2 x 4” (100mm) C-CAM
cone bass/ mid driver.
2 x 1" (25mm) C-CAM gold
dome tweeter
2 x 4” (100mm) C-CAM cone
bass/ mid driver.
1 x 1" (25mm) C-CAM gold
dome tweeter
Cabinet Dimensions
(H x W x D).
145 x 1110 x 89mm
(5 11/16
x 43 11/16 x 3 1/2")
145 x 1310 x 89mm
(5 11/16 x 51 9/16
x 3 1/2")
External Dimensions Inc Bracket.
(H x W x D).
145 x 1110 x 100mm
(5 11/16 x 43 11/16 x 3 15/16")
145 x 1310 x 100mm
(5 11/16 x 51 9/16 x 3 15/16 ")
Weight (each) 7.64Kg (16lb 12oz) 9.1Kg (20lb)
Finishes Black cloth with brushed aluminium end trims
ENGLISH

Termékspecifikációk

Márka: Monitor Audio
Kategória: Soundbar
Modell: SB2

Szüksége van segítségre?

Ha segítségre van szüksége Monitor Audio SB2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Soundbar Monitor Audio

Útmutatók Soundbar

Legújabb útmutatók Soundbar