Használati útmutató Monacor MDF-48Z

Monacor szerver MDF-48Z

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Monacor MDF-48Z (32 oldal) a szerver kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/32
ADVANCED
INSTALL GUIDE
EDITION 1
MondeF
streaming audio solutions
1
The MondeF Server uses a Windows 10 operating system. The MondeF software, the Dante Virtual
Soundcard and the Dante Controller are already installed.
To operate the MondeF server, a USB PC mouse, a USB PC keyboard and an HDMI monitor are
required (not supplied)!
The MondeF system can also be conveniently operated via the HD touchscreen monitors MDF-…-M
available separately.
Two local Windows user accounts are set up on the MondeF server:
The account “Settings” is the user account for the administrator for system configuration.
The account “MondeF” is the user account for the operator; this account operates in the Windows 10
“kiosk mode” and is used after the system configuration has been completed.
To exit the Windows kiosk mode, press the key combination Strg + Alt + Entf.
To change the Windows user account, press the key combination Windows + L.
The system language of the MondeF software automatically adapts to the Windows system
language. To change the language settings, the Windows language must be changed in both
Windows user accounts.
To do this, select Start > Settings > Time & Language > Language.
Select a language from the Windows display language menu.
The settings for the Windows kiosk mode can be found in Windows 10 under
Start > Settings -> Accounts -> Family & other users Assigned access. ->
Windows is a registered trademark of in the Microsoft Corporation USA and other countries.
Dante is a registered trademark of Audinate Pty Ltd.
2
S 1 D n c ”) tep ante Preparation (i the Windows A count Settings
Connect all Dante devices and MondeF controllers to the same network. Connect the MondeF main
unit to the network. For MondeF systems with more then 16 zones, for best results use a second
network that is used for Dante audio distribution only.
Start up the system and enter the “Settings account for configuration. Password for this account is
at the label on the server. Please set a unique password after logging in.
All passwords and access codes are printed on the server. For maximum security
please set a unique password after logging in.
Start Dante Controller und - - er Start >Audinate >Controller.
Here you can connect the Dante devices to the inputs and outputs of the MondeF server. Make sure
the green indicator shows up when connecting Dante devices. A common warning is a sample
mismatch, set the device you are connecting to the same samplerate as the server to resolve this
issue (16 Bit / 44,1 kHz).
See Audinate.com for more info. Basic configuration is setup in mono. For stereo zones and or
sources use 2 channels per zone and source.

Termékspecifikációk

Márka: Monacor
Kategória: szerver
Modell: MDF-48Z

Szüksége van segítségre?

Ha segítségre van szüksége Monacor MDF-48Z, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók szerver Monacor

Monacor

Monacor MDF-48Z Útmutató

11 Augusztus 2024

Útmutatók szerver

Legújabb útmutatók szerver