Használati útmutató Milwaukee M18 Fuel 2788-22HD
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Milwaukee M18 Fuel 2788-22HD (20 oldal) a fúrógép kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/20
Cat. No. / No de cat.
2787-20, 2788-20
M18 FUEL™ 1-1/2" MAGNETIC DRILLS
PERCEUSE MAGNÉTIQUE DE 38 mm (1-1/2") M18 FUEL™
TALADROS MAGNÉTICOS M18 FUEL™ DE 38 mm (1-1/2")
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on
the switch or energizing power tools that have the
switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was designed.
• Do not use the power tool if the switch does not
turn it on and o. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may aect the power tool’s operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations dierent from those intended could
result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
3
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging
improperly or at temperatures outside the specied
range may damage the battery and increase the risk
of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
MAGNETIC DRILLS
• Always use safety chain. Mounting can release.
•
DANGER
To reduce the risk of injury, always
keep hands, gloves, rags, clothing,
etc. away from moving parts and chips. Do not try to
remove chips while the cutter is rotating. Chips are
sharp and can pull objects into moving parts.
• Clean the surface before attaching the drill stand
to the work surface. Paint, rust, scale, or uneven
surfaces decrease the holding strength of the mag-
net. Chips, burrs, dirt and other foreign matter on the
surface of the magnet base will also decrease holding
power.
• Do not attach magnetic base to nonmagnetic
grades of stainless steel. The magnet base WILL
NOT hold. The permanent magnetic drill attaches
magnetically to 1/4" or thicker ferrous stock. Do not
use on stock less than 1/4".
• Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
• Safety Strap
• Do not use near acids or bleaching agents.
• Do not use for overhead lifting.
• Do not use strap if webbing is cut.
• Webbing must be protected from sharp edges.
• All hardware must be in line with direction of
pull for rated capacity.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power
sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known
to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
DANGER
To reduce the risk of injury,
alw a y s keep hands,
gloves, rags, clothing, etc. away from
moving parts and chips. Do not try to
remove chips while the cutter is rotating.
Chips are sharp and can pull objects into
moving parts.
Read Operator's Manual
CUS
UL Listing for Canada and U.S.
SPECIFICATIONS
Cat. No. 2787-20, 2788-20 ......................................
Volts 18 DC..............................................................
Battery Type .................................................M18™
Charger Type M18™................................................
No Load RPM ...........................High 690 / Low 400
Twist Drill* ......................................................... 1/2"
HSS Cutter .................................................... 1-1/2"
Recommended Ambient
Operating Temperature ......................0°F to 125°F
*Requires use of 1/2" drill chuck adapter.
Termékspecifikációk
| Márka: | Milwaukee |
| Kategória: | fúrógép |
| Modell: | M18 Fuel 2788-22HD |
Szüksége van segítségre?
Ha segítségre van szüksége Milwaukee M18 Fuel 2788-22HD, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók fúrógép Milwaukee
30 December 2025
8 Október 2024
1 Október 2024
30 Szeptember 2024
20 Szeptember 2024
13 Szeptember 2024
13 Szeptember 2024
11 Szeptember 2024
10 Szeptember 2024
8 Szeptember 2024
Útmutatók fúrógép
- fúrógép Parkside
- fúrógép Worx
- fúrógép Bosch
- fúrógép AEG
- fúrógép Einhell
- fúrógép Ozito
- fúrógép Makita
- fúrógép Hyundai
- fúrógép Flex
- fúrógép Scheppach
- fúrógép Ergotools Pattfield
- fúrógép Ribimex
- fúrógép Mafell
- fúrógép Kraftixx
- fúrógép Cecotec
- fúrógép Genesis
- fúrógép Güde
- fúrógép Hitachi
- fúrógép Toolcraft
- fúrógép Proviel
- fúrógép Hilti
- fúrógép Black & Decker
- fúrógép Workzone
- fúrógép Global
- fúrógép Kawasaki
- fúrógép Fieldmann
- fúrógép GO/ON
- fúrógép PowerPlus
- fúrógép DEDRA
- fúrógép Metabo
- fúrógép Handwerk
- fúrógép Powerfix
- fúrógép Bavaria
- fúrógép RYOBI
- fúrógép Proxxon
- fúrógép HiKOKI
- fúrógép Festool
- fúrógép Yato
- fúrógép Baumr-AG
- fúrógép McKenzie
- fúrógép Trotec
- fúrógép Delta
- fúrógép Zipper
- fúrógép Bavaria By Einhell
- fúrógép Herkules
- fúrógép Porter-Cable
- fúrógép Tanaka
- fúrógép DeWalt
- fúrógép Stanley
- fúrógép Silverline
- fúrógép Vonroc
- fúrógép Cotech
- fúrógép Alpha Tools
- fúrógép Luxor
- fúrógép Holzmann
- fúrógép Fein
- fúrógép Max Bahr
- fúrógép Cocraft
- fúrógép Craftsman
- fúrógép Maestro
- fúrógép Graphite
- fúrógép Hazet
- fúrógép Ferm
- fúrógép Tryton
- fúrógép Skil
- fúrógép Meec Tools
- fúrógép Sun Joe
- fúrógép Dremel
- fúrógép Tacklife
- fúrógép Maktec
- fúrógép Steren
- fúrógép Bort
- fúrógép Malmbergs
- fúrógép Power Craft
- fúrógép Eibenstock
- fúrógép Topcraft
- fúrógép Festo
- fúrógép Sparky
- fúrógép Gamma
- fúrógép Clas Ohlson
- fúrógép Carat
- fúrógép Kress
- fúrógép Duro
- fúrógép Varo
- fúrógép Defort
- fúrógép Truper
- fúrógép Kinzo
- fúrógép Bruder Mannesmann
- fúrógép Powerblade
- fúrógép Meister Craft
- fúrógép RIDGID
- fúrógép Rupes
- fúrógép Batavia
- fúrógép Protool
- fúrógép Westfalia
- fúrógép Economy
- fúrógép Huvema
- fúrógép Black Decker
- fúrógép Stomer
- fúrógép Fe Powertools
- fúrógép Elu
- fúrógép Blucave
- fúrógép Lux Tools
- fúrógép Wolfcraft
- fúrógép Kreg
- fúrógép Sthor
- fúrógép Verto
- fúrógép Wurth
- fúrógép Spit
- fúrógép King Craft
- fúrógép Rok
- fúrógép Profitech
- fúrógép Narex
- fúrógép Rikon
- fúrógép Duro Pro
- fúrógép Baier
- fúrógép RUKO
- fúrógép Toolson
- fúrógép Felisatti
- fúrógép MSW
- fúrógép Robust
- fúrógép Einhell Bavaria
- fúrógép MyTool
- fúrógép G-Technology
- fúrógép Rodcraft
- fúrógép Stalco
- fúrógép Total
- fúrógép Netter Vibration
Legújabb útmutatók fúrógép
6 Január 2025
5 Január 2025
3 Január 2025
31 December 2025
31 December 2025
31 December 2025
30 December 2025
30 December 2025
30 December 2025
30 December 2025