Használati útmutató Milo Gaming Drive M2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Milo Gaming Drive M2 (1 oldal) a Gamestoel kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
CASTER
5 STAR BASE
TELESCOPING COVER
GAS LIFT
SEAT CUSHION
BACK CUSHION
LEFT ARMREST
RIGHT ARMREST
MECHANISM
SCREWS(1/4” x 3/4”)
SCREWS(1/4” x 1”)
ARM CAPS
BIG ARM CAPS
ALLEN WRENCH(5mm)
Assemble Instructions Of Z1002003A01/04
PARTS LIST
Part# Description Quantity
1.
2.
3.
4.
5.
6.
7A.
7B.
8.
9.
10.
11.
12.
13.
5
1
1
1
1
1
1
1
1
4
8
6
2
1
ASSEMBLY INSTRUCTIONS
WARNING
.
.
.
.
Do not stand on this chair,do not use this chair as a step ladder.
Use this product only for seating one person at one time.
Do not use this chair unless all bolts,screws and knobs are firmly secured.
Failure to follow these warnings could result in serious injury.
WRENCH(5 m m )
SC RE WS(
1/4”×3/4
) ARM CAPS
SC RE WS(
1/4”×1”
)
#9 #11
#13#10
1
2
3
5
6
7
8
4
1
2
3
4
5
5
9
8
13
13
2
10
11
12
6
7B 7A
4
5
5
5
6
A.Remove all the parts from carton and divide them into part groups as
indicated in the parts list .
B.Assemble the chair:
<1> Put 5 CASTERS (1) into the holes on 5 STAR BASE (2).
<2> Insert GAS LIFT (4) to the center hole on top of 5 STAR BASE (2). Insert TELESCOPING
COVER (3) over GAS LIFT (4).
<3> Attach MECHANISM (8) to SEAT CUSHION (5) (with arrow on mechanism facing front of
chair ) by inserting 4 SCREWS (9).Tighten screws.
<4> Then put on top of GAS LIFT (4).
<5/6/7> Attach both LEFT and RIGHT ARMRESTS (7A&7B) to SEAT and BACK CUSHION (5&6)
by using 8 SCREWS (10). (Remark: Don’t tighten screws until all the screws have been
in right location.)
<8> Then place 6 ARM CAPS (11) and 2 BIG ARM CAPS (12) into the arm holes once screws
have been tightened.
C.Information for use.
<1>This type is one kind of office chair. It`s mainly used in the office, but also can be used
in your house if the floor is smooth.
<2>The height of the seat can be up and down by adjusting the handle of the mechanism.
The back can tilt freely.
<3>Please check all the bolts,screws are tight at least every 4 months. Some
kind of ointment in proper can be used to maintain the leather.
<4>If parts are missing,broken,damaged or wrong,please stop using of this product until
repairs are done by a trained person.
<5>Only trained person may replace or repair seat height adjustment component with
energy accumulators.
13
10
13
10
GF-81091H

Termékspecifikációk

Márka: Milo Gaming
Kategória: Gamestoel
Modell: Drive M2

Szüksége van segítségre?

Ha segítségre van szüksége Milo Gaming Drive M2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Gamestoel Milo Gaming

Útmutatók Gamestoel

Legújabb útmutatók Gamestoel