Használati útmutató Middle Atlantic ICAB-COOL50
Middle Atlantic
Hardverkoeling
ICAB-COOL50
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Middle Atlantic ICAB-COOL50 (4 oldal) a Hardverkoeling kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/4
I-00521 Rev A
PRODUCT FEATURES
- Powerful, yet quiet way to remove heat from electronic components located in cabinets, credenzas,
lecterns, and entertainment centers.
- Blowers exhaust 50 CFM of hot air while providing high static pressure to maintain airflow, even in a
crowded cabinet.
Thank you for purchasing the (I)CAB-COOL50 Cabinet Cooler. Please read these instructions
thoroughly before installing/operating this product.
(G)
FRONT VIEW
BOTTOM VIEW
PRODUCT CALLOUTS
Page 2
A) CONTROL CIRCUIT: DO NOT BLOCK! NOTE:
B) TURN ON TEMPERATURE: The blower will turn on at 87° F (30.5° C) and run proportionately (speed
increases with temperature) from 87° F (30.5° C) to 95° F (35° C). At 95° F and above, the blower
will run at full speed. The blower will stop running at 85° F (29.4° C).
C) PRODUCT REVISION LEVEL: Current revision level of your (I)CAB-COOL50.
D) MANUFACTURING DATE CODE: Denotes the date the (I)CAB-COOL50 was manufactured.
E) TEMPERATURE PROBE: Temperature detection probe, five feet long.
F) POWER CONNECTOR: Connects to the provided power supply.
G) POWER LED: Blue LED that illuminates when the unit is receiving power.
(C)
(D)
(B)
(A)
(F)
(E)
NOTE: The grille can be painted by removing the four screws securing it in place. Prior to painting,
lightly scuff the surface with 160 grit sandpaper for proper adhesion. Remove the two screws
on the top and two on the bottom securing the grille. Use a #2 Phillips screwdriver. (FIGURE A)
1) Determine installation location and orientation.
2) Affix the template at the installation location. The cutout dimensions are provided on the template.
3) Drill pilot holes using 1/8” (3 mm) drill bit for hardwood, 7/64” (3 mm) drill bit for softwood.
4) Using a jigsaw cut out the area defined on the template. The dashed area of the template is the
9” (229 mm) X 2” (51 mm) section to be removed.
PARTS LIST
1 - (I)CAB-COOL50
1 - 12V 1A POWER SUPPLY
1 - ADHESIVE BACKED TEMPLATE
2 - #8 X 3/4” WOOD SCREWS
1 - ALCOHOL WIPE
5 - WIRE TIES
5 - WIRE TIE SADDLES
For Best Thermal Management Practices Please Visit
http://www.middleatlantic.com/pdf/ThermalManagement.pdf
Page 3
TOOLS REQUIRED
- #2 PHILLIPS HEAD DRIVER
- JIGSAW
- DRILL
- 1/8" (3 mm) DRILL BIT (For Hardwood)
- 7/64” (3 mm) DRILL BIT (For Softwood)
FIGURE A
INSTALLATION
Termékspecifikációk
| Márka: | Middle Atlantic |
| Kategória: | Hardverkoeling |
| Modell: | ICAB-COOL50 |
Szüksége van segítségre?
Ha segítségre van szüksége Middle Atlantic ICAB-COOL50, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Hardverkoeling Middle Atlantic
27 December 2024
27 December 2024
27 December 2024
26 December 2024
26 December 2024
26 December 2024
26 December 2024
26 December 2024
26 December 2024
26 December 2024
Útmutatók Hardverkoeling
- Hardverkoeling DeepCool
- Hardverkoeling StarTech.com
- Hardverkoeling Evolveo
- Hardverkoeling Gigabyte
- Hardverkoeling Phanteks
- Hardverkoeling Asus
- Hardverkoeling Antec
- Hardverkoeling Akasa
- Hardverkoeling TriStar
- Hardverkoeling APC
- Hardverkoeling Cooler Master
- Hardverkoeling NZXT
- Hardverkoeling Be Quiet!
- Hardverkoeling Emerson
- Hardverkoeling Corsair
- Hardverkoeling Arctic Cooling
- Hardverkoeling Noctua
- Hardverkoeling Thermaltake
- Hardverkoeling ENDORFY
- Hardverkoeling Cougar
- Hardverkoeling ALSEYE
- Hardverkoeling Savio
- Hardverkoeling Chieftec
- Hardverkoeling Enermax
- Hardverkoeling Lian Li
- Hardverkoeling SilverStone
- Hardverkoeling Intel
- Hardverkoeling Alpenföhn
- Hardverkoeling Zalman
- Hardverkoeling In Win
- Hardverkoeling AeroCool
- Hardverkoeling Krux
- Hardverkoeling SilentiumPC
- Hardverkoeling Mars Gaming
- Hardverkoeling Thermalright
- Hardverkoeling Alphacool
- Hardverkoeling AZZA
- Hardverkoeling CoolerMaster
- Hardverkoeling Iceberg Thermal
- Hardverkoeling Raijintek
- Hardverkoeling Bitspower
- Hardverkoeling EK Water Blocks
- Hardverkoeling Middle Atlantic Products
- Hardverkoeling Cryorig
- Hardverkoeling AC Infinity
Legújabb útmutatók Hardverkoeling
4 Január 2025
4 Január 2025
27 December 2024
26 December 2024
22 December 2024
22 December 2024
22 December 2024
5 December 2024
5 December 2024
5 December 2024